R V R ELETTRONICA TX5000 Broadcast Systems User Manual
- June 13, 2024
- R V R ELETTRONICA
Table of Contents
R V R ELETTRONICA TX5000 Broadcast Systems
Product Information
| Product Name | TX5000 |
|---|---|
| Manufacturer | Italy |
| File Name | capitoli_en.p65 |
| Version | 1.0 |
| Date | 02/12/2002 |
R.V.R. Elettronica SpA is the manufacturer of the TX5000 FM transmitter. It is designed for FM audio broadcasting and operates on frequencies that may not be harmonized in the intended countries of use. Users must obtain a license before using the product in the intended country and comply with respective country licensing requirements. The transmitter has limitations on operating frequency, transmitter power, and channel spacing.
R.V.R. Elettronica SpA declares that the TX5000 FM transmitter is in compliance with the essential requirements and provisions of Directive 1999/5/EC.
Product Usage Instructions
The TX5000SS is a modular radio transmitter for frequency modulation audio broadcasting. It is built up of components assembled in a 19-inch rack, complete with electrical and RF wiring.
When using the TX5000SS, please refer to the manuals of the different components that are attached to this manual. These manuals provide details about warranty, safety, working principles, and technical specifications.
Configurations
Different configurations of the transmitter are available. The customer can choose the configuration that best fits their needs in terms of redundancy or telecontrol capabilities. The model names of the different transmitters refer to the components included.
| Model Name | Description |
|---|---|
| TX5KSSRD/RDS | This version of the transmitter gives redundant exciters and |
RDS coders.
TX5KSSRD| This version of the transmitter gives redundant exciters.
TX5KSSD/RDS| This version of the transmitter gives redundant RDS
coders.
TX5KSSD| This version of the transmitter does not include redundancy or
RDS coders.
TX5KSSR/RDS| This version of the transmitter is tele-controllable and
includes the RDS coder.
TX5KSSR| This is the simplest telemetrized version of the TX500SS.
TX5000SS/V2| Version 2 of the TX5000SS transmitter.
Manufactured by Italy
File name: capitoli_en.p65
Version: 1.0
Date: 02/12/2002
Revision History
TX5000 – User Manual
Versione 1.0
© Copyright 2002
R.V.R. Elettronica SpA
Via del Fonditore 2/2c – 40138 – Bologna (Italia) Telefono: +39 051 6010506
Fax: +39 051 6011104
Email: info@rvr.it
Web: www.rvr.it
All rights reserved
Printed and bound in Italy. No part of this manual may be reproduced,
memorized or transmitted in any form or by any means, eletronic or mechanic,
including photocopying, recording or by any information storage and retrieval
system, without the permission of the copyright owner.
Notification of intended purpose and limitations of product use
This product is a FM transmitter intended for FM audio broadcasting. It
utilises operating frequencies not harmonised in the intended countries of
use.
The user must obtain a license before using the product in intended country of
use. Ensure respective country licensing requirements are complied with.
Limitations of use can apply in respect of operating freuency, transmitter
power and/or channel spacing.
Declaration of Conformity
Hereby, R.V.R. Elettronica SpA, declares that this FM transmitter is in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Introduction
This manual describes the TX5000SS, a radio transmitter for frequency
modulation audio broadcasting.
The TX5000SS is a modular device, built up of components assembled in a 19”
rack, complete with electrical and RF wiring.
This manual shall be read together with the manuals of the different
components, that are attached herewith.
Details about warranty, safety, working priciples and technical specifications
are given in the single manuals.
Configurations
General
The essential components of the TX5000SS are:
- 1 PTX100LCD/s Exciter;
- 1 PJ5000M Amplifier:
- 5 PJ1000M LCD amplifiers;
- 1 HC5 hybrid coupler.
Different configurations of the transmitter are available. The costumer will
choose the one that best fits his need in terms, e.g. of redudancy or
telecontrol capabilities.
This chapter describes the different configurations the TX5000SS can have.
Please note that transmitters layouts given herein are reference ones; the
height of the racks and the disposition of the modules may vary and will be
specified at the time of placing the order. The model names of the different
transmitters refer to the components included.
TX5KSSRD/RDS
This version is the most complete version of the TX5000SS. With respect to the “essential” components, it features:
- Double exciters (2 PTX100LCD/s);
- Double RDS encoders (2 TRDS4001);
- Automatic change-over (SCM1+1 LCD);
- Telemetry unit (TLC300);
Of course, it also includes the PJ5000M RF amplifier.
TX5KSSRD
This version of the transmitter gives to the customer the benefit of redundant exciters and remote control. It is composed of:
- Double exciters (2 PTX100LCD/s);
- Automatic change-over (SCM1+1 LCD);
- Telemetry unit (TLC300);
- Amplifier (PJ5000M).
TX5KSSD/RDS
This version of the transmitter gives redundant exciters and RDS coders. It consists of:
- Double exciters (2 PTX100LCD/s);
- Double RDS encoders (2 TRDS4001);
- Automatic change-over (SCM1+1 LCD);
- Amplifier (PJ5000M).
TX5KSSD
This version is composed of:
- Double exciters (2 PTX100LCD/s);
- Automatic change-over (SCM1+1 LCD);
- Amplifier (PJ5000M).
TX5KSSR/RDS
This version of the transmitter is tele-controllable and includes the RDS coder. It is composed of:
- Exciter (PTX100LCD/s);
- RDS encoder (TRDS4001);
- Telemetry unit (TLC300);
- Amplifier (PJ5000M).
TX5KSSR
This is the simplest telemetrized version of the TX500SS. This version is composed of:
- Exciter (PTX30LCD/s);
- Telemetry unit (TLC300);
- Amplifier (PJ5000M).
TX5000SS/V2
This version is composed of:
- Exciter (PTX100LCD/s);
- Amplifier (PJ5000M).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>