R V R Elettronica TX-K-KLC Series Broadcast Systems Owner’s Manual
- June 13, 2024
- R V R ELETTRONICA
Table of Contents
R V R Elettronica TX-K-KLC Series Broadcast Systems
Product Information
Model: TX15K-KLC
The TX-K-KLC series is a liquid-cooled modular transmitter system designed for FM stations. The TX15K-KLC model has a power output of 15,000W.
Features:
- Hardware Features: The system offers maximum modularity and scalability, allowing for economical compositions with single exciter or redundant custom compositions with double exciter.
- Power & Quality: The U-KLC series-based transmitters enable the creation of compact equipment up to 20kW. The system utilizes high-efficiency pumps and does not require forced ventilation, resulting in high energy savings. The cooling system operates with a low-pressure circuit and includes a double pump with automatic switching and diagnostics.
- Reliability & Redundancy: The transmitter ensures extremely safe operation by cutting the power supply line to various relay switches when the emergency button is pressed. Exciters remain operational.
- User-Friendly Features: The transmitter is equipped with user-friendly software and a simple, intuitive HM interface for easy setup and control of all operating parameters.
- Ease of Maintenance: The transmitter incorporates advanced modular engineering concepts for improved accessibility and ease of maintenance. It also features lightweight components, creating a better cleaner work environment with low environmental noise.
- Remote Control: The device comes with a powerful telemetry system for remote control.
Product Usage Instructions
To use the TX15K-KLC transmitter, follow these steps:
- Ensure that the transmitter is properly connected to the powersupply.
- Use the user-friendly software and HM interface to set up the operating parameters. Refer to the user manual for detailed instructions on parameter configuration.
- For stereo operation, connect the audio input to the transmitter using a 3-1/8 EIA Flange cable.
- Adjust the audio input impedance according to your specific requirements.
- Monitor the RF output power and frequency stability to ensure optimal performance.
- If using stereo operation, monitor the stereo FM S/N ratio, stereo separation, linear cross talk, and non-linear cross talk to maintain audio quality.
- Perform regular maintenance tasks as outlined in the user manual to ensure proper functioning of the transmitter.
- If remote control is desired, utilize the included telemetry system for controlling the transmitter remotely. Refer to the user manual for instructions on setting up and using the telemetry system.
If you encounter any issues or have further questions regarding the usage of the TX15K-KLC transmitter, please refer to the user manual or contact R.V.R. Elettronica S.r.l. for assistance.
TX15KSS/60D213J
Modular transmitter, 15kW (composed of HC-CCU + 3x PJ5000U-KLC + 2x PTX30DDS).
FEATURES
HARDWARE FEATURES: Maximum modularity and scalability of the system from
economical compositions “single exciter” to redundant custom compositions
“double exciter”.
POWER & QUALITY: With the family of RVR’s liquid transmitters based on
the U-KLC series, is possible to realize compact equipments up to 20kW, with
high energy savings thanks to the use of high efficiency pumps and no forcing
ventilation. The Cooling system is with low pressure circuit and double pump
in automatic switching and diagnostics.
RELIABILITY & REDUNDANCY (business continuity): Extremely safe operation:
by pressing the emergency button is cutting the power supply line to the
various relay switches while remaining exciters operational.
USER-FRIENDLY FEATURES: user-friendly software and a simple, intuitive HM
interface let you easily set up and control all machine operating parameters.
user-friendly software and a simple, intuitive HM interface let you easily set
up and control all machine operating parameters.
EASE OF MAINTENANCE: accessibility and ease of maintenance are ensured by
advanced modular engineering concepts incorporated in the transmitter and by
its lightweight components. Better cleaner work environment and low
environmental noise.
REMOTE CONTROL: the device comes with a powerful, complete telemetry
system.
TX15KSS/60D213J
Parameters ** U.M.
Value| Notes
---|---
GENERALS
RF Output power| kW| 15|
Frequency range| | 87.5 – 108 MHz programmable in 1,10 or 1000 KHz
steps|
Frequency stability| ppm| ±1|
Nominal frequency deviation| | ±75 KHz (peak)|
Maximum frequency deviation| | ±100 KHz (peak)|
Class of emission| | 180KF8E|
Stereo transmission| | Acc. To ITU-R / Rec. 450 (Pilot tone)|
RF output impedance| | 50 Ω, Unbalanced|
RF output connector| | 3-1/8” EIA Flange|
VSWR| | 1.41:1 with automatic fold-back at higher VSWR|
Frequency control| | Synthesizer µ processor control|
Modulation capability| | ±150 KHz|
Modulation mode| | Mono, Stereo, Multiplex, SCA, RDS, DARC, Aux|
Pre-emphasis Mode| | 0/50 (CCIR) µs, 75 (FCC) µs|
Asynchronous AM S/N Ratio| | ≥ 70 dB unweight, referred to
100% AM modulation at 400 Hz Pre-emphasis an| d without FM modulation
Synchronous AM S/N Ratio| | ≥ 55 dB, reference to 100% AM
modulation at 400 Hz, 50 µs Pre-emphasis with| FM modulation at 75 KHz of
deviation
Harmonics suppression and Spurious| dB| Typically 85|
Overall efficiency| %| Typically 70/72|
RF Harmonics| | Exceeds ETSI/CCIR/FCC requirements|
RF Spurious| | Exceeds ETSI/CCIR/FCC requirements|
Max Frequency Tolerance| | As per ITU (R)|
Analogue Input Level ±75 Khz (peak) deviation| | -6 dBu – +6 dBu at 1
Khz, 0 dBu|
Digital Input Level ±75 Khz (peak) deviation| |
-20.0 dBFS – 0 dBFS (adjustable) at 1 Khz|
MONO OPERATION
S/N ratio| | > 90dB (typical 92dB), 75KHz deviation (30 Hz to 15 KHz
base band) rms, unwe| ighted
Total Harmonic Distortion + Noise| %| Better than 0.15|
nter Modulation Distortion SMPTE| | Better than 0.20% (60 Hz
/ 7 KHz, 4:1, +4|
Frequency Response| | ±0.2dB (30Hz – 15Khz)|
Audio Input Impedance| | 600 Ω balanced or 10 kΩ unbalanced|
MPX OPERATION
S/N ratio| | >90 dB, 75 KHz deviation rmd, unweight|
Total Harmonic Distortion + Noise| %| <0.02%|
Inter Modulation Distortion SMPTE| | <0.02% 60 hz / 7 khz,
4:1, +4dbu|
Frequency Response| | ±0.3dB, 30 Hz to 100 KHz|
Transient Intermodulation Distortion| | 0.03%, 2.96 KHz square
wav end 14 KHzsine wave|
STEREO OPERATION
Audio Input Impedance| | 2 K ohm or more|
Stereo FM S/N Ratio unweighted| | >84 dB, 30 Hz to 15
KHz deviation (L or R), rms|
Stereo Separation ((Sine wave))| | ≥ 60 dB (30 Hz – 15 KHz)|
Linear Cross Talk| | Better than 50 dB, referred to 100%
modulation (30 Hz to 15 KHz)|
Non-linear Cross Talk| | Better than 50 dB, referred to 100%
modulation|
Total Harmonic Distortion + Noise (L or R)| | <0.02%, 60 Hz / 7 KHz,
4:1, +4dBu|
Inter Modulation Distortion SMPTE (L or R)| |
±0.2 dB, 30 Hz – 15 Khz|
Digital Input Impedance**| | 110 Ω|
All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice. These are general specifications. They show typical values and are subject to change without notice.
R.V.R. Elettronica S.r.l.
Via del Fonditore, 2/2c
40138 Bologna Italy
Phone +39 0516010506
Fax +39 0516011104
R.V.R. Elettronica S.r.l.
Via del Fonditore 2/2 c
40138 Bologna – Italy
Phone +39 051 6010506
[email protected]
www.rvr.it