R V R Elettronica PJM-C Series Modular Family Owner’s Manual
- June 13, 2024
- R V R ELETTRONICA
Table of Contents
solid state amplifiers
PJ2500M-C/PFC
PJ3500M-C
PJ4000 U -K
> modular family PJM-C series
PJ3500M-C front view
Features
-
PRIMARY APPLICATION: RVR PJ M-C amplifiers offer uncompromised, high amplification power. Ideal to supplement mid to high power stations. Adjustable power output from 0 to maximum output power.
-
AMPLIFIER FEATURES: exceptional-gain amplifiers with low input drive power requirement. Available (optionally) LD “Low Drive” technology which reduces required input drive power to as little as 5W.
-
HARDWARE FEATURES: RVR PJ M-C amplifiers are extremely compact and rugged thanks to the stainless steel chassis. Only 3RU high. Separate power supply and amplification sections, with no tuning required between units.
-
RELIABILITY/CONTINUITY: SMD technology used in manufacturing the PJ M-C series ensures enhanced reliability and uninterrupted performance. APC (Automatic Power Control) and Foldback protection ensure reliable operation under any operating conditions.
Highly redundant amplification unit which, in the event one or more of the eight amplifier modules becomes totally or partially impaired due to a fault, the PJ M-C output power is reduced to a safe value to maintain transmission and remain on air. -
OPERATING EFFICIENCY: RVR PJ M-C amplifiers incorporate a PFC (Power Factor Corrector) power supply that provides the utmost power efficiency for enhanced energy savings and environmental protection.
-
USER-FRIENDLY FEATURES: triple power supply (PJ3000M-C) or six power supply devices (three in each power supply unit, PJ4000M-C), all user-selectable for single or three-phase operation, ensures reduced power operation in the event of a failure to keep you on the air.
Pushbuttons for user/device interaction provide enhanced accessibility and control, resulting in extreme ease of use.
Configuration software offers a simple, intuitive, human interface. -
INTERFACE CONTROL: total microprocessor control, easily programmed from panel menu or via RS232 with all key parameters displayed on the front panel LCD display.
-
EASE OF MAINTENANCE: advanced module engineering ensures extreme ease of access and simple maintenance.
-
REMOTE CONTROL: supplied with telemetry connectors and is compatible with all RVR telemetry systems and other popular transmitter remote control systems.
-
REGULATORY COMPLIANCE: state-of-the-art technology and design results in equipment that is in full compliance with FCC, CCIR, and EC standards.
FM Mosfet Amplifiers 87,5 – 108 MHz
PJ3500M-C rear view
Technical specifications
| PJ2500M-C
---|---
Parameters|
Values
GENERALS
Rated output power
| 2500W
Frequency range|
FCC -CCIR and other on request
Input power for rated output
| 70W typical
Input power for rated output LD version|
< 5 W
Primary Power
| 230/400 VAC ±15% , 3-phase +neutral, 50/60Hz or 230 VAC ±10%, 1-phase,
50/60Hz; ILME CFX4/2 connector
AC Power Consumption|
4200 VA / 4100W / PF: 0,98
Overall efficiency
| > 60 %
Phisical Dimensions (W x H x D)|
483 x 132+132 x 700 mm
Weight RF Unit
| 38 kg
Weight Power supply unit|
30 kg
Environmental Working Conditions
| -10 ÷ +50 °C / 95% relative Humidity non condensing
Cooling|
Forced, with internal fans
CONNECTORS
RF Input
| N (50 ohm)
RF Output|
7/16″ EIA flange type, 50 ohm
RF Monitor
| BNC (- 60dBr referred to RF output )
Interlock Output|
BNC
Interlock Input
|
BNC
STANDARD COMPLIANCE
Safety
| EN 60215:1989
EN60215/A1:1992-07
EN60215/A2:1994-09
EMC|
EN 301 489-1 V1.4.1 (2002-08)
EN 301 489-11 V1.2.1 (2002-11)
PJ3500M-C
|
PJ4000U-K
---|---
Value
|
Value
3500W
|
4000W
FCC -CCIR and other on request
70W typical
< 5 W
230/400 VAC ±15% , 3-phase +neutral, 50/60Hz or 230 VAC ±10%, 1-phase, 50/60Hz; ILME CFX4/2 connector
5860 VA / 5750 W / PF:0,98|
6520 VA / 6650 W / PF: 0,98
60 %
483 x 132+132 x 700 mm
38 kg
| 40 kg
32 kg|
33 kg
-10 ÷ +50 °C / 95% relative Humidity non condensing
Forced, with internal fans
N (50 ohm)
7/16″ EIA flange type, 50 ohm
BNC (- 60dBr referred to RF output )
BNC
BNC
EN 60215:1989
EN60215/A1:1992-07
EN60215/A2:1994-09
EN 301 489-1 V1.4.1 (2002-08)
EN 301 489-11 V1.2.1 (2002-11)
99/5/CE Revision: 03/10
All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice. These are general specifications. They show typical values and are subject to change without notice.
Ordering information
Options for PJM-C
Code| Description
/TWIN| Dual, redundant power supply section.
Available for model PJ4000U-K only on request.
/LD-PJM-C| Low drive power (less than 5W)
RVR Elettronica S.p.A.
Via del Fonditore, 2/2c
Zona Industriale Roveri • 40138 Bologna • Italy
Phone: +39 051 6010506 • Fax: +39 051 6011104
e-mail: info@rvr.it • web: http://www.rvr.it
ISO 9001:2000 certified since 2000
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>