R V R Elettronica TEX1000 LCD-PFC Exciters Transmitters Owner’s Manual
- June 13, 2024
- R V R ELETTRONICA
Table of Contents
exciters/transmitters
TEX1000 LCD/PFC
TEX1300 LCD/PFC
TEX2000 LCD
> easy maintenance series
compact with integrated exciters series
high fidelity series
TEX1000-LCD front view
Features
-
PRIMARY APPLICATION: RVR TEX transmitters offer uncompromised transmission quality at a very attractive price. Ideal for use as drivers for mid-power stations or as transmitters in standalone applications. Adjustable power output from 0 Watt to maximum output power.
-
AUDIO PERFORMANCE: key audio features are low distortion and intermodulation values and a high noise/signal ratio.
-
HARDWARE FEATURES: RVR TEX transmitters are compact and in deformable thanks to the stainless steel chassis, in 3 rack units only.
-
RELIABILITY/CONTINUITY: dual, redundant power supply ensures limited-power operation in the event of a failure for maximum business continuity.
APC (Automatic Power Control) and Foldback protection ensure reliable operation under any operating conditions. -
EASE OF MAINTENANCE: advanced module engineering ensures extreme ease of access and simple maintenance.
-
INTERFACE CONTROL: total control thanks to microprocessor easily programmed from menu or via RS232 with all key parameters displayed on LCD.
-
INPUT/OUTPUT INTERFACE: built-in high-performance stereo coder, L&R analogue audio inputs, Mono inputs, MPX composite signal and auxiliary inputs for SCA / RDS signals.
-
REMOTE CONTROL: built-in telemetry system with GSM modem, battery and battery charger (option).
-
REGULATORY COMPLIANCE: state-of-the-art technology in full compliance with EC, FCC and CCIR standards.
-
USER-FRIENDLY FEATURES: pushbuttons for user/device interaction provide enhanced accessibility, resulting in extreme ease of use.
Configuration software offers a simple, intuitive interface.
stereo/MPX FM exciters 87,5 – 108 MHz
( Oirt and JPN Band upon request )
TEX1000-LCD rear view
Technical specifications
| TEX1000LCD| TEX1300LCD| TEX2000LCD
---|---|---|---
Parameters| Values| Values| Values
GENERALS
Rated output power| 1000W| 1300W| 2000W
Frequency range| FCC -CCIR and other on request
Operational Mode| Mono, Stereo, Multiplex
Modulation type| F3E
Primary Power| 230VAC ±15% or 115VAC| 230VAC ±15%
AC Power Consumption| 1690 VA / 1660 W / PF: 0,98| 2108 VA / 2065W / PF: 0,98|
3320 VA / 3300 W / PF:0,99
Overall efficiency| 60%| 63%| 61%
Phisical Dimensions (W x H x D)| 483 x 132 x 670 mm
Weight| 27 kg| 32 kg
Environmental Working Conditions| -10 ÷ +50 °C / 95% relative Humidity non
condensing
Cooling| Forced, with internal fan
Frequency programmability| From software, with 10 kHz steps
Frequency stability| ±1 ppm
Pre-emphasis mode| 0/50 (CCIR) µS, 75 (FCC) µS
Spurious & harmonic suppression| <75 dBc (80 typical)
Asynchronous AM S/N ratio | ≥60 dB (typical 68)
Synchronous AM S/N ratio| ≥50 dB (typical 58)
MONO OPERATION
S/N FM Ratio| > 80 dB RMS (typical 83 dB)
Frequency Response| < ± 0.5 dB 30Hz ÷ 15kHz (typical ± 0.2 dB)
Total Harmonic Distortion| < 0.1 % 30 Hz ÷ 15 kHz (typical 0.07 %)
Intermodulation distortion| < 0.02 % with 1 kHz and 1,3 kHz tones
MPX OPERATION
Composite S/N FM Ratio| > 80 dB RMS (typical 83 dB)
Frequency Response| ± 0.2 dB 30Hz ÷ 53kHz / ± 0.5 dB 53kHz ÷ 100 kHz
Total Harmonic Distortion| < 0.1% 30Hz ÷ 53kHz
Intermodulation distortion| < 0.05% with 1 kHz and 1,3 kHz tones
INTERNAL STEREO CODER OPERATION
Stereo S/N FM Ratio| > 75 dB RMS (typical 77dB)
Frequency Response| ± 0.5 dB 30 Hz ÷ 15 kHz
Total Harmonic Distortion| < 0.05% 30 Hz ÷ 15 kHz
Intermodulation distortion| ≤0.03% with 1 kHz and 1,3 kHz tones
Stereo separation| > 50 dB 30 Hz ÷ 15 kHz (typical 55 dB)
AUDIO INPUT CONNECTORS
Left / Right| XLR balanced; Impedance: 10 k or 600 ohm; Level: -13 to +13 dBu
MPX unbalanced/RDS| BNC unbalanced; Impedance: 10 k or 50 ohm; Level: -13 to
+13 dBu
SCA/RDS| 2 x BNC unbalanced; Impedance: 10 k; Level: -8 to +13 dBu
OTHER CONNECTORS
RF Output| 7/16″ EIA flange type
RF Monitor| BNC (- 30dBr referred to RF output )
Pilot output| BNC (1Vpp)
Interlock Input| BNC
STANDARD COMPLIANCE
Safety| EN 60215:1989
EN60215/A1:1992-07
EN60215/A2:1994-09
EMC| EN 301 489-1 V1.4.1 (2002-08)
EN 301 489-11 V1.2.1 (2002-11)
Radio| EN 302 018-2 V1.2.1 (2005-06)
99/5/CE Revision: 03/10
All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice. These are general specifications. They show typical values and are subject to change without notice.
Ordering information
Options for TEX-LCD
Code| Description
/CW| Morse-coded station ID code generated through FSK (Frequency Shift
Keying) function
/CNT7/8-245 | 7/8″ output RF connector
/CNT7/8-295 | 7/8″ output RF connector
TCPIPINT-TEX | Telemetry system via the Internet
/TLM-TEX3HE | Telemetry system via internal GSM modem.
Battery and battery changer included
/TLC-TEX3HE | Internal telemetry system without modem
/MODGSM | Telemetry system via external GSM modem
/MODPSTN | Telemetry system via external PSTN modem
TELINK-C1 | Telemetry interface ANTLAN/BURK protocol
TELINK-SNMP2 | Telemetry interface RVR/SNMP 1 HE
- Please specify station name on order.
** Available for model TEX2000LCD.
*** Usable only in combination with /TLC-TEX3HE option.
RVR Elettronica S.p.A.
Via del Fonditore, 2/2c
Zona Industriale Roveri • 40138 Bologna • Italy
Phone: +39 051 6010506 • Fax: +39 051 6011104
e-mail: info@rvr.it • web: http://www.rvr.it
ISO 9001:2000 certified since 2000
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>