MINKA LAVERY 6101-172 1-Light Bathroom Light in Brushed Nickel Instruction Manual

MINKA LAVERY 6101-172 1-Light Bathroom Light in Brushed Nickel

Product Information

The product is a fixture that needs to be mounted on a wall. It includes a mounting plate, a fixture wall plate, a large glass shade, a round ring, a small glass shade, a cushion ring, and a socket. The fixture should be connected to an outlet box using the provided screws and wire connectors. It is important to ensure proper grounding by connecting the fixture’s ground wire either to the outlet box’s ground wire or directly to the mounting strap using the provided green screw. The maximum wattage rating of the bulb should not be exceeded.

Product Usage Instructions

1. Before starting the installation, cut off the power supply at the fuse box or circuit breaker.
2. If there is an existing fixture on the wall, remove it along with its mounting hardware.
3. Take out the new fixture from the carton and verify that all parts are included according to the illustration.
4. Attach the mounting plate (I) to the outlet box using the outlet box screws (J). Make sure that the side of the mounting plate marked GND faces out.
5. Connect the electrical wires as shown in Fig. 2, ensuring that all wire connectors are securely fastened.
6. If your outlet box has a ground wire, connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting strap using the green screw provided.
7. Tuck the wire connections neatly into the wall outlet box.
8. Attach the fixture wall plate over the mounting plate by protruding the mounting screws through the mounting holes on the wall plate. Secure them with the ball nut (H) until snug.
9. Place the large glass shade (F), round ring (E), small glass shade (D), and cushion ring (C) in that order over the socket (G). Then secure them with the socket ring (B) using the socket ring tool (A).
10. Install the bulb according to the fixture’s specifications. Make sure not to exceed the maximum wattage rating.
11. Once the installation is complete, restore power to the junction box and test the fixture.

MOUNTING THE FIXTURE (FIG. 1)

1. Shut off the power supply at the fuse box or circuit breaker. If necessary, remove the old fixture from the wall. Including the mounting hardware.
2. Carefully remove the new fixture from the carton and check that all parts are included as shown in the illustration.
3. Attach the mounting plate (I) to the outlet box using the outlet box screws (J). The side of the mounting plate marked “GND” must face out.

CONNECTING THE WIRES (FIG. 2)

1. At this point, connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your outlet box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting strap using the green screw provided.

2. Tuck the wire connections neatly into the wall outlet box.
   MOUNTING THE FIXTURE (FIG. 1)

3. Attach the fixture wall plate over the mounting plate (I) by protruding the mounting screws through the mounting holes in the wall plate and securing it with ball nut (H) until snug.

4. Place the large glass shade (F), round ring (E), small glass shade (D), and cushion ring(C) in this order over the socket (G). Then secure with socket ring (B) using socket ring tool (A).

5. Install the bulb in accordance with the fixture’s specifications. (DO NOT EXCEED THE MAXIMUM WATTAGE RATING!) (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!).

6. Your installation is now complete. Return power to the junction box and test the fixture.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>