final UX2000 Wireless Active Noise Cancelling Headphones User Manual

final UX2000 Wireless Active Noise Cancelling Headphones User Manual

Package Contents

• UX2000
  

• User Manual
  

• USB Type-C Charging Cable
  

• Analog Audio Cable with 3.5mm Plug
  

Product Overview

• A: Charging Indicator
• B: Microphone
• C: USB Charging Port
• D: Bluetooth/ANC Indicator
• E: Power Button
• F: Volume + Button
• G: Microphone
• H: Volume – Button
• I: 3.5mm Audio Jack
• J: ANC(Active Noise Canceling) Button

Charging the Headphones

Connect the USB Charging Port to a charging adaptor with the supplied USB Type-C Charging Cable. The Charging Indicator flashes Red while charging and turns Green when the headphones are fully charged.

1. While charging, the power of the headphones will be turned OFF and the Bluetooth connection will also be disabled.
2. Please do not use any charging cables other than the one provided.

Powering ON

Press and hold the Power Button for 4 seconds and the headphones will turn ON with a “Power ON announcement and the Bluetooth/ANC Indicator lights up in Blue.

Powering OFF

Press and hold the Power Button for 5 seconds and the headphones will turn OFF with a “Power OFF announcement. When the power is turned OFF, the Bluetooth/ANC Status Indicator lights up Red and fades off.

Activating/Deactivating ANC (Active Noise Canceling)

When you power ON headphones, noise canceling is automatically activated. While the headphones are in pairing mode, the Bluetooth/ANC indicator will blink alternately in Red and Blue, and upon connecting to a device such as a smartphone, the Bluetooth/ANC Indicator will light up in Green,

With the power ON, pressing the ANC Button will play a voice prompt saying “Noise Canceling OFF”, turning OFF the noise canceling feature, and the Bluetooth/ANC Indicator will tum OFF,

Pressing the ANC Button again will play a voice prompt saying “Noise Canceling”, reactivating the noise canceling feature, and the Bluetooth/ANC indicator will light up in Green,

Performing Device Pairing

In order to use the UX2000 with your device, initial device pairing is necessary. Once the headphone is paired to a device, it will connect to the device automatically next time the power is turned ON.

Performing initial device pairing:

1. Press and hold the Power Button for around 4 seconds and the headphones will turn ON with a “Power ON” announcement. The headphones start device pairing mode automatically with the Bluetooth/ ANC Status Indicator flashing alternately in Red and Blue.
2. With the Bluetooth function of the device being ON, choose “UX2000” under the device list. The device pairing is successful if “UX2000 Connected” is shown.

Unpairing current device and performing new device pairing with another device:

1. While the headphone power is OFF, press and hold the Power Button for 5 seconds and the headphones will turn ON and start device pairing mode with “Power ON” & “Bluetooth Pairing” announcements and the Bluetooth/ANC Status Indicator flashes alternately in Red and Blue.
2. With the Bluetooth function of the device is ON, choose “UX2000” under the device list. The device pairing is successful if “UX2000 Connected” is shown.

*This product supports multipoint connections, allowing it to be connected to 2 devices simultaneously. When connecting a third device or more, it will automatically overwrite the initially connected device with the newly connected device in sequence. Additionally, the product will automatically connect to previously paired devices. Therefore, if there is a device you do not wish to connect to simultaneously, please turn off the Bluetooth functionality or delete the pairing record on the device

Deleting the Pairing Record

To prevent unintended connections due to the multipoint feature, which allows simultaneous connection with 2 devices, please delete the pairing information using the following procedure if you wish to disconnect. After the operation is complete, please pair the device again.

1. When the device is powered ON, press and hold both the Volume + Button and the Volume Button simultaneously until the Bluetooth/ANC Indicator lights up in Purple.
2. The headphones will automatically enter pairing mode, and the Bluetooth/ANC Indicator will blink alternately in Red and Blue, indicating that the pairing record has been deleted.
   *Please note that button operations are disabled when the Analog Audio Cable with 3.5mm Plug is connected,

Media Control while Analog Audio Cable is Connected

By connecting the included Analog Audio Cable with 3,5mm Plug into the 3,5mm Audio Jack on the headphones, you can also use them as wired headphones. When the 3.5mm Audio Jack is connected, the power of the headphones will automatically tum OFF, and all the button operations. will be disabled. Please perform media control operations on the playback device side.

Gaming Mode

Pressing the ANC Button twice will turn on Gaming Mode, and you will hear a voice guidance saying “Gaming Mode ON”.

During Gaming Mode, you can enjoy content such as games and videos with low- latency wireless connection.

To turn Gaming Mode OFF, press the ANC Button twice again, and you will hear a voice guidance saying “Gaming Mode OFF”, turning Gaming Mode OFF.

The latency reduction effect varies depending on the model connected.

Media Control

Music Playback /
Phone Call| Increasing Volume| Press the Volume + Button
Decreasing Volume| Press the Volume – Button
Siri/
Google Assistant| Activating| Press the Power Button twice *1
Switching Gaming Mode ON/OFF| Press the ANC Button twice
Switching ANC ON/OFF| Press the ANC Button once

• There is a possibility that this does not work for certain devices,
• Media controls on the headphones are disabled when the headphones is connected with the Analog Audio Cable.

Maintenance

Regularly wipe the headband and earpads with a soft, dry cloth to keep the headphones clean,

Safety Precautions

The following descriptions are provided to explain matters that must be observed in order to prevent harm to the user as well as other people, along with damages to property. Please be sure to observe this before using the product..

DANGER
Failure to observe the precautions indicated by this label will result in death or serious injury to the user,

WARNING
Failure to observe the precautions indicated by this label may result in death or serious injury to the user.

CAUTION
Failure to observe the precautions indicated by this label may result in personal injury or property damage,

DANGER

ELECTRIC SHOCK
Fire, electric shock, overheat, ignition, leakage, rupture, or accidental ingestion may cause death, blindness, or serious injury.

PROHLBITED
Do not use, store, or leave the product in a humid or dusty place, or in a car where it will be exposed to high temperatures, or places exposed to direct sunlight. Doing so may cause overheat, leakage, or rupture of the product.

PROHLBITED
Do not use other than the supplied USB cable. Doing so may cause rupture. battery leakage, or overheat and consequently result in fire, burn mark, or injury.

PROHLBITED
Do not put it in a fire, Doing so may cause leakage or rupture and consequently result in injury or burn mark

PROHLBITED
Do not charge the battery when the Charging Port or USB cable is wet. Doing so may cause abnormal heating or malfunction due to short circuit.

DO NOT DISASSITED
Do not disassemble the product. Doing  so may cause product malfunctions,

PROHLBITED
If you find that liquid is leaking from the PROM headphones, or if there is an unusual odor or overheat, do not touch the liquid and stop using the headphones immediately. Besides that, move all combustible materials nearby away from the headphones.

WARNING

ELECTRIC SHOCK
Fire, electric shock, overheat, ignition may cause burn or serious injury.

PROHLBITED
Do not use the product while driving a car, motorcycle, bicycle, etc.. Doing so may cause a traffic accident.

PROHLBITED
Do not use the product in places where it would be dangerous if the surrounding sound is not audible. Listening at high volume makes it difficult to hear surrounding sounds, Use at railroad crossings, pedestrian crossings, station platforms, etc. may cause accidents or injuries.

PROHLBITED
Do not allow water or foreign matter to get inside the headphones and Transmitter These devices are not waterproof, Water or foreign matter may cause fire or electric  shock, If water or foreign matter should enter the devices, stop using it immediately. Regularly check and ensure that no foreign matter adheres to charging port as it may cause overheat or fire

PROHLBITED
Do not charge the headphones while it is covered by bedding or other covering. The heat buildup may cause abnormal overheat, which may result in a fire.

CAUTION

May cause injury or damage to surrounding property.

PROHLBITED
Keep out of reach of children or persons requiring supervision. Swallowing any part of the product such as magnets or batteries can be very dangerous and lead to choking hazards, or internal organ damage

PROHLBITED
Do not use in medical institutions or around people using medical equipment. It may cause malfuntion to medical devices such as pacemakers.

MANDA TORY
When using the headphones on board an aircraft, follow the instructions of the flight crew, Radio wave effects may cause an accident.

PROHLBITED
A drastic change of air pressure inside the earcup could cause severe damage not only to headphones but also to the ears. It is dangerous, so please do not press the earcups while wearing the headphones.

PROHLBITED
Do not listen at high volume for long periods of time. Prolonged use at excessive volume may result in permanent hearing loss. Do not exceed 40 hours/week at 80 dB (A) and 5 hours/week at 89 dB (A),

CAUTION
Using headphones with earrings. piercings, etc., on your ears may cause injury. In addition, they may cause degradation to the headphones performance or result in scratches to the body of the headphones.

Troubleshooting

When you think, “Is it broken?” –

allow the internal battery to be fully charged at the time of shipping.For that reason, voltage may fall below the level required for operation at the time the customer opens the package. Fully charging the battery before use may relieve this inconvenience. Please refer to “Charging the Headphones” on P.4 regarding the method for charging.
Power Button has not been pressed for adequate time| Please press and hold the Power Button long enough for the headphones to turn ON. Please refer to ‘Powering ON’ on P.5 for the details of the method.
Analog Audio Cable with 3.5mm Plug is connected| Please disconnect the Analog Audio Cable since the power is automatically turned OFF once the Analog Audio cable is connected.
Headphones will not turn OFF| An error has occurred| Normally, headphones power automatically turns OFF when charging. Please try to charge the headphones by using the supplied USB Type-C charging cable and check if the Charging Indicator lights up in Red. Then pleasedisconnect the cable and check again if the power can be turned OFF.
Power Button has not been pressed for adequate time| Please press and hold the Power Button long enough for the headphones to turn OFF. Please refer to “Powering OFF” on P.5 for the details of the method.
Unable to activate the Gaming Mode| Analog Audio Cable with 3.5mm Plug is connected| When the included cable is connected to the 3.5mm Audio Jack, the power of the device will automatically turn OFF, disabling all button operations and Gaming Mode. If you wish to use Gaming Mode, please disconnect the Analog Audio Cable and power ON the headphones. Please use this mode while the headphones are wirelessly connected to a device, such as a smartphone.
Unable to activate the ANC| Analog Audio Cable with 3.5mm Plug is connected| When the included cable is connected to the 3.5mm Audio Jack, the power of the device will automatically turn OFF, disabling all button operations and ANC feature. If you wish to activate the ANC feature, please disconnect the Analog Audio Cable and power ON the headphones.

Warranty and After Service

The warranty for this product is valid for 1 year from the date of purchase. During the warranty period, we will repair the product based on the provisions below. The warranty is only valid in the country in which the product was purchased. Regarding questions pertaining to repairs, please contact the store you purchased the product from or contact us by visiting our “Contact” page.

1. During the warranty period, we will repair the product free of charge if the product failed even though it was used in accordance with the instructions in the user’s manual and the point of caution sections,
2. In the following cases, repairs to the product will be subject to a fee even during the warranty period:
3. Warranty card, original purchase receipt or other equivalent document showing the date of purchase are failed to be presented.
4. The product is identified to be modified, disassembled, or repaired by a third party or customer other than our company or our authorized organizations.
5. The headphones were subjected to a strong impact or were allowed to get wet, Product failure resulting from an excessive use of force on the product.
6. Failure of the product or damage caused as a result of fire, earthquake, storm or flood damage, lightning strike or other natural disaster.
7. Repair of scratches on the surface of the housing or repair of the housing itself.
8. We shall not be liable for any incidental or consequential damages for breach of any express or Implied warranty or condition on this product. Nor shall recovery of any kind against us be greater than the original purchase price of the product from us or an our authorized

Regarding the earpads:
Earpads are considered as consumable parts which is not covered under warranty. Kindly contact the store you made the purchase from for the information regarding the purchase of a new pair of earpads.

Disposal Regulation

The rechargeable batteries built into the equipment are recyclable. During disposal, please follow the instructions from your local municipal government and do not attempt to disassemble the product.

Contacting Us

Please contact us by visiting our official “CONTACT page by scanning this QR code.

https://final-inc.com/pages/lang-contact

Manufacturer:
final Inc.

*There is a possibility of a change in the specification, so please scan this QR code for the latest user manual.

https://final-inc.com/pages/lang-download-ux2000

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>