hama 00201677 MagCharge Car FC15 Wireless Car Charger Instruction Manual

hama 00201677 MagCharge Car FC15 Wireless Car Charger

Controls and displays

1. USB-C input
2. Status LED
3. Adjustment lever
4. Grating attachment
5. Car adapter for power supply

LED function indicator

LED function indicator

Power supply| Solid red
Standby| Solid red
Charging process| Flashes red
End of charging| Solid green 1)
Error message| Flashes alternately 5x green and red

1. The display at the end of charging may differ on some devices, depending on the manufacturer.
   Thank you for choosing aHama product.
   Take your time and read the following instructions and information completely.Please keep these instructions in asafe place for futurereference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of warning symbols and notes

Risk of electric shock
This symbol indicates arisk of electric shock from touching uninsulated product parts that may carry hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to draw your attention to specifichazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package contents

• “FC-10C Flex” wireless car charger for smartphones
• Grating holder
• 1x car adapter for power supply
• 1x USB-AtoUSB-C connecting cable
• These operating instructions

Safety instructions

• Protect the product from dirt, moistureand overheating and use it in dry environments only.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the specifications.
• Do not use the product in areas in which electronic products arenot permitted.
• Ensurethat the product is not covered up by textiles, metal or other objects in order to avoid damage caused by overheating.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Do not modify the product in any way.Doing so voids the warranty.
• Do not continue to operate the product if it is visibly damaged.
• Use the product only for the intended purpose.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• Only use the article under moderate climatic conditions.
• As with allelectrical products, this device should be kept out of the reach of children.
• Do not use the product in adamp environment and avoid splashing water.
• Do not bend or crush the cable.
• Never apply force when using the product or during installation.
• When using this product, observe the applicable local trafficlaws and regulations.
• Take carethat components such as airbags, safety areas, controls, instruments, etc. and visibility arenot blocked or restricted.
• Ensurethat the product is securely mounted beforeevery journey.
• Do not allow yourself to be distracted by the product when driving avehicle. Always pay attention to the surrounding trafficand your environment.
• Always pull directly on the plug when disconnecting the cable, never on the cable itself.

Warning
Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the product. The data on the cards could be damaged or completely deleted
Ensurethat thereare no metal parts (e.g. metal plate for magnetic holders) on the back of your device. Metal heats up significantly in the field of an induction charger and can damage your device and/or the charger.

Risk of electric shock

• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the charging cable, adapter cable or power cable is damaged.
• Do not attempt to service or repair the product yourself.Leave any and all service work to qualified experts.

Start-up and operation

Note

• To be able to charge your device via the wireless charger,itmust be compatible with induction charging technology.Please refer to the operating instructions of your device for moreinformation.
• Note that mobile phone cases, covers, etc., and other materials between the wireless charger and the back of your device may interferewith or even prevent the charging process.

Note –12V,24V vehicle electrical systems

The charger is suitable for 12 Vand 24 Vvehicle electrical systems.

• Fasten the wireless car charger over the enclosed grating holder (4) to your vehicle’sgrating.
• Connect the enclosed USB-AtoUSB-C connector cable to the USB-C input (1) on the inductive charger and the enclosed car adapter for the power supply (5).
• When the power supply is active, the status LED (2) lights up red.
• Use the adjustment lever (3) to set the holding jaws to the size of your smartphone. Youcan move the controller slightly by pressing it to release the locking mechanism.
• First place the holding jaws in the maximum opening position for setting them to the size of your smartphone.
• Then place the smartphone in the charger and, using the adjustment lever,slide the holding jaws together until the smartphone sits firmly in the holder.
• Release the lever to lock the position.
• Thanks to the flexible holding arms, you can now easily fixyour smartphone in the charger and remove it again at any time. The holding arms always remain in the position you set them in earlier.

Warning

• Only use suitable charging devices or USB ports to charge the product.
• Do not use defective chargers or USB ports and do not attempt to repair them.
• Now place your device with its rear on the wireless charger (B).
• The charging process begins as soon as an effective induction field has been established. The status LED (2) starts to flash red. The current charge status is displayed on your device.
• If no induction connection can be established, change the position of your device if necessary (B).
• The charging process ends automatically once your device’sbattery is fully charged. The status LED (2) lights up solid green.
• Remove your device from the wireless charger and disconnect the wireless charger from the power supply.
• If metallic or magnetic objects are charged,this is indicated by status LED (2) flashing green and red alternately.After flashing five times, the status LED (2) goes out.

Note -car battery

With some vehicles, it can happen that power continues to be supplied even though the ignition has been switched off.You should therefore disconnect the product from the line connection when not in use to protect your car battery from being drained.

Care and maintenance

Only clean this product using alint-free, slightly damp cloth and do not use any harsh cleaners. Ensurethat no water is able to enter the product.

Note
Disconnect the device from the mains beforecleaning and during prolonged periods of non-use.

Warranty disclaimer

Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failuretoobserve the operating instructions and/or safety notes.

Technical data

Wireless car charger

Wireless car charger

Input

| 5V __ max. 2.0 A

9V __ max. 1.67 A

Output (under optimised conditions)| max. 10 W
For smartphones with a width of 65 – 90 mm

Car adapter

Car adapter:

Vehicle electrical system voltage| 12 V, 24 V

Output voltage / current max.

| 5V ____ 3.0 A

9V ____ 2.22 A

12 V __ 1.67 A

Output power total| 20 W max.

Declaration of conformity

Hama GmbH &CoKG hereby declares that the radio equipment type [00201677] is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following Internet address:
www.hama.com -> 00201677 -> Downloads

Hama GmbH &CoKG 86652 Monheim /Germany

Service &Support

www.hama.com
+49 9091 502-0
Alllistedbrandsare trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

References

• hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>