SALTO IQ2.0 Ethernet and USB Stick Cellular For APAC Installation Guide
- June 13, 2024
- SALTO
Table of Contents
- SALTO IQ2.0 Ethernet and USB Stick Cellular For APAC
- Product Information
- Product Specifications
- Product Usage Instructions
- Installation
- ETHERNET + CELLULAR MODEL
- ETHERNET + WIFI MODEL
- ETHERNET + POE MODEL
- ETHERNET MODEL
- SUPPORT
- Electrical features
- LED Signals
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SALTO IQ2.0 Ethernet and USB Stick Cellular For APAC
Product Information
Model
IQ223, IQ224
Installation Guide
The installation guide provides instructions for installing the IQ2.0
product.
Product Specifications
- Min Temperature: 0°C
- Max Temperature: 40°C
- WIFI IEEE 802.11 b/g/n radio
- 2.4 GHz RF Characteristics:
- Frequency Range: 2405-2480 Mhz (ISM band)
- RF Standard: IEEE 802.15.4
- Indoor Radio Range: 7m*
- POWER SUPPLY CHARACTERISTICS:
- Input Voltage: 12V
- Max Current: 800mA
- BLE Bluetooth 4.2 Compliant:
- Integrated antenna
- TX power: up to +8dBm
- RX sensitivity: down to -92dBm
- Indoor range: 10-15m*
- (PoE + WiFi variant might suffer a range reduction of up to 30%)
- POE Connection:
- Complies to IEEE 802.3af (max 15.40W, also known as 802.3a Type 1)
LED Signals
| LED MODE | LED COLOUR | STATUS INDICATION |
|---|---|---|
| Blink BLUE twice | Normal Power Up | |
| Blink long BLUE | Software reset | |
| Blink RED GREEN BLUE | Factory reset | |
| Blink short BLUE | IQ2.0 firmware update | |
| Blink short GREEN (2 minutes) | Until the BLE connection is established | |
| Blink long GREEN | BLE connection is established | |
| Blink short RED | No connection to the cloud | |
| Blink long PURPLE | No valid subscription found | |
| Permanent WHITE | Factory mode |
* Depending upon the installed environment.
Product Usage Instructions
- Choose the appropriate model: IQ223 or IQ224.
- Follow the installation guide specific to the chosen model:
- a) For the Ethernet + Cellular model:
- Plug in the device.
- b) For the Ethernet + WiFi model:
- Plug in the device.
- c) For the Ethernet + POE model:
- Plug in the device.
- d) For the Ethernet model:
- Plug in the device.
All contents are current at the time of publication. SALTO Systems S.L. reserves the right to change the availability of any item in this catalog, its design, construction, and/or materials.
Installation
ETHERNET + CELLULAR MODEL
ETHERNET + WIFI MODEL
ETHERNET + POE MODEL
ETHERNET MODEL
SUPPORT
Electrical features
To ensure a correct operation, do not install the device near a metallic surface.
LED Signals
All contents are current at the time of publication.
SALTO Systems S.L. reserves the right to change the availability of any item
in this catalog, its design, construction, and/or materials.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>