kogan KAWPBLUESPK Wireless Portable Bluetooth Speaker User Guide
- June 13, 2024
- Kogan
Table of Contents
kogan KAWPBLUESPK Wireless Portable Bluetooth Speaker
SAFETY & WARNINGS
Important Safety & Instructions
- Read these instructions carefully before use and retain this user guide for future reference.
- Do not attempt to disassemble, repair or modify this speaker in any way. Doing so may cause permanent product damage and possible personal injury.
- Do not use this product in dusty, dry, humid or high-temperature environments.
- Do not place this product near any sources of heat or in direct sunlight. Avoid areas that experience a lot of dust or mechanical vibration.
- In order to reduce the risk of fire, during operation, do not cover this product with newspapers, tablecloths, curtains etc.
- If this product shows any sign of damage, cease use immediately and contact help.Kogan.com for support.
- When the product is fully charged, do not leave it plugged in for an extended period.
- The maximum ambient temperature should not exceed 40°C.
- Before first use, ensure the product is fully charged.
- If this product is not being used for an extended period, ensure it is fully charged at least once within a month.
- Do not use this product in an extremely cold or hot environment, such as temperatures beyond the range of 5-35°C. If used outside this range, the product may stop automatically to protect the internal circuits.
- This speaker supports TWS.
OVERVIEW
- Power button
- Mode button
- Volume decrease “-”
- Volume increase “+”
- microSD card slot
- USB port
- USB charging port
OPERATION
Charging the Speaker
- Plug the supplied USB cable into the charging port on the speaker.
- Connect the cable to a USB power adapter (mobile phone charger) and connect it to a power outlet.
- The speaker will be fully charged in approximately 2 hours.
Pairing with Bluetooth Device
- Press and hold the power button for 2 seconds. The speaker will play a tone and the indicator will begin to rapidly flash. The speaker is now in pairing mode.
- Activate Bluetooth on your phone or other Bluetooth-enabled device.
- Select “TG-352” from the list found devices.
- The indicator will turn solid blue once pairing has been successful.
TWS Mode
This speaker can be linked to a second speaker (sold separately) to function
in TWS “True Wireless Stereo” mode. To activate TWS mode:
- Turn on both speakers and ensure the blue indicators are flashing.
- Press and hold the mode button for 2 seconds on one of the speakers. The speaker will play an audio tone and enter into TWS pairing mode.
- After 1-2 seconds, the two speakers will automatically pair together. The speakers will both play an audio tone if they have been successfully paired together.
- The primary speaker will have a solid blue indicator, while the secondary speaker’s indicator will continue to flash.
- Open the Bluetooth settings on your device and select ” TG-352″ from the list of found devices.
- Your device is now paired to both speakers.
- To disable TWS mode, press and hold the mode button for 2 seconds on one of the speakers.
Note:
For TWS mode, the two speakers will need to be linked together before
connecting to your Bluetooth device.
Button Functions
- + Button
- Short press short for the next song
- Long press to increase the volume
- Power Button
- Press and hold for 2 seconds to power ON/OFF
- In FM mode, press to search for station, and press again to stop searching
- Press to answer an incoming call/end a call
- Press twice to reject an incoming call
- Press to play/pause during music playback
- Button
- Short press short for the previous song
- Long press to decrease volume
- Mode Button
- Press to switch between USB/SD card/Bluetooth/FM modes
FM Radio Mode
- Press the mode button to cycle between the different modes until you enter the “FM mode”.
- Press the power button to start searching for radio stations. Press the power button again to stop searching.
Note: plugging in the charging cable will return better results when searching for an FM radio station.
microSD Card Playback
Play your favourite music in MP3 format directly from a microSD card.
Inserting a (FAT32 format) microSD card into the microSD card slot. The
speaker will decode and play the audio.
USB Playback
Play your favourite music in MP3 format directly from USB flash drives. Insert
a (FAT32 format) USB flash drive containing your favourite music files, and
the speaker will decode and play the audio.
Notes:
If this speaker crashes during use, you can press and hold the power button
for 8 seconds to reset and shut down.
SPECIFICATIONS
- Wireless V5.3
- Protocols L2CAP/A2DP/AVCTP, can receive AUDIO signal and control the AUDIO device. Support HSP/HFP (Handsfree profile), with Handsfree functions.
- Working distance 10M
- SNR ≥90db
- Battery 3.7V, 500mAh
- Normal volume playing time Approx. 2 hours
- Speaker driver ¢52mm x 1
- Power 4Ω/5W x 1
- Frequency response 120Hz-20KHz
- Unit size 97 x 97 x 47.8mm
- Unit weight Approx. 234g (not including accessories)
- Charging 5V/500mA
- Charging time Approx. 2hrs
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up. For the most up-to-date guide for your product, as well as any
additional assistance you may require, head online to
help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>