Conrad SP-TVC-800 Motorized TV Cart With Remote Control Instruction Manual
- June 13, 2024
- CONRAD
Table of Contents
- Conrad SP-TVC-800 Motorized TV Cart With Remote Control
- Product Information
- Product Usage Instructions
- Intended use
- Latest product information
- Description of symbols
- Safety instructions
- Cleaning and care
- Declaration of Conformity (DOC)
- Disposal
- Technical data
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Conrad SP-TVC-800 Motorized TV Cart With Remote Control
Product Information
- Product Name: SP-TVC-800 Motorized TV Cart with Remote Control
- Item Number: 2799628
- Manufacturer: Conrad
Description: The SP-TVC-800 Motorized TV Cart is a versatile and convenient solution for mounting and moving your television. With the included remote control, you can easily adjust the height and position of the TV to optimize your viewing experience. This motorized TV cart is designed for indoor use and is suitable for TVs up to the specified weight limit.
Product Usage Instructions
General Safety Instructions
- Keep the product out of the reach of children and pets.
- Do not leave packaging material lying around as it may become dangerous playing material for children.
- If you have any unanswered questions about the product, contact our technical support service or other technical personnel.
- Maintenance, modifications, and repairs should only be performed by a technician or an authorized repair center.
Operating Environment
- Place the product in a dry, enclosed indoor area. Avoid exposing it to dampness or moisture.
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam, and solvents.
- Avoid high humidity and direct sunlight.
- If the product has been in a cold environment, allow it to reach room temperature before switching it on to prevent condensation damage.
Operation
- If you have any doubts about the operation, safety, or connection of the product, consult an expert.
- If the product cannot be operated safely, take it out of operation and seek professional assistance.
Cleaning and Maintenance
- Disconnect the product from the power supply before cleaning.
- Use a dry, fiber-free cloth to clean the product.
Disposal
When disposing of the product, follow the appropriate local regulations and
guidelines.
Latest Product Information
To stay updated with the latest product information, download the files
from www.conrad.com/downloads or scan the QR code
is provided in the manual. Follow the instructions on the website for
accessing the information.
SP-TVC-800 Motorized TV Cart with Remote Control
- Item no: 2799628
Intended use
- The product is a TV cart with an equipment shelf, camera mount, remote-controlled motor for monitor adjustment, and heavy-duty caster wheels.
- The product is intended for indoor use only. Do not use it outdoors.
- Contact with moisture must be avoided under all circumstances.
- If you use the product for purposes other than those described, the product may be dam-aged.
- Improper use can result in short circuits, fires, or other hazards.
- The product complies with the statutory national and European requirements.
- For safety and approval purposes, you must not rebuild and/or modify the product.
- Read the safety instructions and any accompanying instructions carefully and store them in a safe place. Make this product available to third parties only together with the safety instruc-tions and any accompanying instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Description of symbols
The following symbols are on the product/appliance or are used in the text:
- The symbol warns of hazards that can lead to personal injury.
- The symbol warns of dangerous voltage that can lead to personal injury by elec-tric shock.
- Protection class 2 (double or reinforced insulation, protective insulation).
- This product must only be used in dry, enclosed indoor areas. It must not become damp or wet.
- Read the operating instructions carefully.
Safety instructions
Read this document and the accompanying operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions that remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications, and repairs must only be completed by a technician or an authorized repair center.
Handling
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
Operating environment
- Do not place the product under any mechanical stress.
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam, and solvents.
- Protect the product from high humidity and moisture.
- Protect the product from direct sunlight.
- Do not switch the product on after it has been taken from a cold to a warm environment. The condensation that forms might destroy the product. Allow the product to reach room temperature before you use it.
Operation
- Consult an expert when in doubt about the operation, safety, or connection of the product.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to serious transport-related stresses.
Power adapter
Do not modify or repair mains supply components including mains plugs,
mains cables, and power supplies. Do not use damaged components. Risk of death
by electric shock!
- Connect the appliance to a wall socket that can be accessed easily.
- As a power supply, only use the supplied mains adaptor.
- Only connect the power adaptor to a normal mains socket connected to the public supply. Before plugging in the power adaptor, check whether the voltage stated on the power adaptor complies with the voltage of your electricity supplier.
- Never connect or disconnect power adaptors if your hands are wet.
- Never unplug the power adaptor from the mains socket by pulling on the cable; always use the grips on the plug.
- For safety reasons, disconnect the power adaptor from the main socket during storms.
- Do not touch the power adapter if there are any signs of damage, as this may cause a fatal electric shock! Take the following steps:
- Switch off the mains voltage to the socket containing the power adapter (switch off the corresponding circuit breaker or remove the safety fuse, and then switch off the corresponding RCD protective switch).
- Unplug the power adapter from the main socket.
- Use a new power adapter of the same design. Do not use the damaged adapter again.
- Ensure that cables are not pinched, kinked, or damaged by sharp edges.
- Always lay cables so that nobody can trip over or become entangled in them. This poses a risk of injury.
(Rechargeable) Batteries
- Correct polarity must be observed while inserting (rechargeable) batteries.
- The (rechargeable) batteries should be removed from the device if it is not used for a long period of time to avoid damage through leaking. Leaking or damaged (rechargeable) batteries might cause acid burns when in contact with skin, therefore use suitable protective gloves to handle corrupted (rechargeable) batteries.
- (Rechargeable) batteries must be kept out of reach of children. Do not leave (rechargeable) batteries lying around, as there is a risk, that children or pets swallow them.
- All (rechargeable) batteries should be replaced at the same time. Mixing old and new (rechargeable) batteries in the device can lead to (rechargeable) battery leakage and device damage.
- (Rechargeable) batteries must not be dismantled, short-circuited, or thrown into fire. Never recharge non-rechargeable batteries. There is a risk of explosion!
Sharp edges
- Edges of the product can be sharp and cause cuts if touched or rubbed against. Handle sharp edges very carefully. If necessary, wear protective gloves.
Before assembly and installation
- The monitor must have a suitable mounting device (for example: a VESA mount). An improperly mounted monitor can fall down and cause injury. Ensure the monitor is suitable before you mount it. Check the instructions that came with the monitor.
Assembly and installation
- The monitor is heavy. Lifting heavy weights can cause injury. Install the product together with another person.
- Glass can break and result in cuts. Handle glass components very carefully.
- Route cables in such a way that they cannot get jammed, bent, or tripped over.
- Over-tightening the screws may cause damage to the threading and can impair the strength of screw connections. Do not over-tighten the screws.
Do not misuse
- Do not sit, stand, hang onto, or support yourself on the product. The product can collapse or fall over and cause injury.
- Do not hang objects onto the product. The product can collapse or fall over and cause injury.
Do not overload
- The product can collapse if overloaded and cause serious personal injury. Observe the maximum payload given in the product specifications.
Use
- Jerky adjustment or movement can make the product tip over and cause injury or product damage. Adjust and move the product carefully.
- Tighten brakes (if available) after moving in place.
Maintenance
- Adjusting and moving the product can cause the screw connections to get loose over time. Components can fall down or fall off and cause injury. Check all screw connections from time to time.
Cleaning and care
Important:
- Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
- Do not immerse the product in water.
- Disconnect the product from the power supply.
- Clean the product with a dry, fibre-free cloth.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product conforms to the 2014/53/EU directive.
- Click on the following link to read the full text of the EU Declaration of Conformity: www.conrad.com/downloads.
Enter the product item number in the search box. You can then download the EU Declaration of Conformity in the available languages.
Disposal
Product
This symbol must appear on any electrical and electronic equipment placed
on the EU market. This symbol indicates that this device should not be
disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.
(Rechargeable) batteries
Remove batteries/rechargeable batteries, if any, and dispose of them
separately from the product. According to the Battery Directive, end users are
legally obliged to return all spent batteries/rechargeable batteries; they
must not be disposed of in the normal household waste.
Batteries/rechargeable batteries containing hazardous substances are labeled
with this symbol to indicate that disposal of household waste is forbidden.
The abbreviations for heavy metals in batteries are Cd = Cadmium, Hg =
Mercury,
Pb = Lead (name on (rechargeable) batteries, e.g. below the trash icon on the
left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our stores, or wherever (rechargeable) batteries are sold. You thus fulfill your statutory obligations and contribute to environmental protection. Batteries/rechargeable batteries that are disposed of should be protected against short circuits and their exposed terminals should be covered completely with insulating tape before disposal. Even empty batteries/rechargeable batteries can contain residual energy that may cause them to swell, burst, catch fire, or explode in the event of a short circuit.
Technical data
Cart
- Supported screen sizes……………… 139.7 – 254.0 cm (55 – 100″)
- VESA compatible………………………. 200×200, 300×200, 400×200, 300×300, 400×300, 600×200, 350×350, 400×400, 600×400, 800×400, 800×600
- Maximum loading ………………………
- Flat panel TV: 120 kgs
- AV component: 5 kg
- Camera mount: 5 kg
- Dimensions (W x H x D) …………….. 1075 x 970 x (1445 – 2320) mm
- Weight …………………………………….. 39.17 kg (without accessories)
Remote control
- Power supply……………………………. 2x 1.5 V AAA batteries
- Transmission frequency …………….. 2.436 – 2.438 GHz
- Transmission power ………………….. 1.06 dBm
- Transmission range…………………… 10 m
Control box
- Input voltage / current………………… 29 V/DC, 6.5 A
- Output……………………………………… 180 W
- Duty cycle………………………………… max. 10 %, max. 2 min ON / 18 mins OFF
- Cable length …………………………….. 8.5 cm
Power adaptor
- Input ………………………………………. 100 – 240 V/AC, 50/60 Hz, 4.0 A
- Output …………………………………….. 29.0 V/DC, 3.0 A 87 W
- Duty Cycle:
- max. 10 %, max. 2 min ON / 18 mins OFF
- max. loading 7.5 A
Environment
- Operating/storage conditions…….. -10 to +80 °C, 1 – 80 % RH (non-condensing)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
2799628_V3_0923_dh_ss_en 9007200112935563-2 I2/O3.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>