luminii SMD Stenos Modules Instruction Manual
- June 13, 2024
- luminii
Table of Contents
luminii SMD Stenos Modules
Installation Instructions
Please read all instructions prior to installation and keep for future reference!
- PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN
- USE ONLY WITH CLASS 2 POWER UNIT
- 24 VOLTS DC
- SUITABLE FOR DRY LOCATIONS ONLY
Module & Cover Installation
Note: Total wattage of installed modules must not exceed 96W, 4A Maximum per power feed.
Note: For additional information reference the complete track system installation instruction.
Carefully align then snap the ambient or directional module fixture into the surface/recessed track housing. Be careful to ensure that the module bracket is inserted vertically into the Track Housing, reference above. If tiling directional module reference step A.1.
Track Covers may be cut to length in the field & installed in between modules to create a closed aesthetic.
To remove Modules from Track Housing, use the provided plastic tool to pry out the modules from the ends.
The directional modules can be aimed +/-30° by loosening the rotation locking screws and setting to the desired angle.
The power track contains three copper conductors: The center conductor is a common positive (+), while the two outer conductors are separate negatives (-).
The ambient and directional modules have asymmetric electrical contact pins that allow for 2-channel installations depending upon the module orientation when inserted into the track housing. This 2-channel feature of the power track allows for the creation of two separately controllable lighting zones. For example, all ambient modules can be controlled on channel #1 and all directional modules can be controlled on channel #2.
If only 1 channel control is desired, the separate negative (-) power feed wires can be tied together when wiring the remote power supply.
When using dynamic white version of the modules, channel 1 is used for warm white negative (-) and channel 2 is used for cool white negative (-)
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
info@luminii.com
www.luminii.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>