VEVOR HKB1040A Manual Tire Bead Breaker User Guide
- June 13, 2024
- VEVOR
Table of Contents
VEVOR HKB1040A Manual Tire Bead Breaker
Product Information
The Tire Bead Breaker is a tool designed to assist in breaking loose the bead of a tire from the rim. It is available in two models: HKB1040A and HKB1040B. The tool is manufactured by VEVOR, a company committed to providing high- quality tools at competitive prices.
Specifications
- Model: HKB1040A/HKB1040B
- Fit Tire Diameter (inch): Less Than 42
- Net Weight (kg): 5/6
- Gross Weight (kg): 5.5/6.5
- Package Size (mm): [Not provided in the manual]
Product Usage Instructions
Safety & Warning
Read and understand the entire manual before assembling, installing,
operating, or servicing the Tire Bead Breaker. Failure to follow these
warnings and instructions can cause death, personal injury, or damage to
valuable property.
DO NOT use an impact wrench as it may damage the bead breaker. Before and after each use, check to make sure that all hardware is securely tightened.
Operation
Tools required: adjustable wrench, open end wrench, or air ratchet.
- Place the tire bead breaker onto the rim with the teeth and breaker foot positioned between the rim and tire bead.
- Tighten the rim clamp jaw until snug using a hand wrench. Ensure that the bead breaker teeth and foot are against the bead.
- Continue tightening with the wrench until snug. Do NOT over tighten!
- Using the wrench, begin turning the bead breaker nut clockwise. This will start driving the bead breaker foot downward.
- Continue turning clockwise until the bead is broken loose from the rim. If necessary, repeat this process in 2 to 3 locations on each side of the wheel until the entire bead is broken.
Please note that the appearance of the product may vary from what is shown in the manual. VEVOR reserves the right to interpret the user manual. Any technology or software updates on the product will not be communicated separately.
Contact Information
If you have any product questions or need technical support, please feel
free to contact VEVOR:
Email: CustomerService@vevor.com
Technical Support and E-Warranty Certificate www.vevor.com/support
TIRE BEAD BREAKER
MODEL: HKB1040A/HKB1040B
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
MODEL:HKB1040A/HKB1040B
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us: CustomerService@vevor.com
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
SPECIFICATIONS
Model| Fit Tire Diameter (inch)| Net Weight (kg)| Gross Weight(kg)| Package
Size（mm）
---|---|---|---|---
HKB1040A| Less Than 42| 5| 5.5| 290×125×165
HKB1040B| Less Than 42| 6| 6.5| 290×125×165
Safety & Warning
-
Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury or damage to valuable property.
-
DO NOT use impact wrench as it will damage the bead breaker.
-
Before and after each use, check to make sure that all hardware is tightly secured. Regularly inspect for damage. If fraying or distortion is found, immediately discontinue use.
Use common sense when working. Stay alert and concentrate when setting up and using the tire bead breaker. Never work while under the influence of alcohol, drugs or medications. -
While assembling and using the tire bead breaker keep work area clean and well lighted. Keep spectators and children out of the work area.
-
Dress appropriately. Never wear loose fitting clothing or jewelry when working. Contain long hair, and keep hair, clothing and gloves away from moving parts.
PARTS BREAKDOWN
PARTS LISTING
Item No.| Description| Qty.| Item No.| Description|
Qty.
---|---|---|---|---|---
1| Long Screw| 1| 8| Spindle| 1
2| Elastic Pin| 1| 9| Washer| 1
3| Hex Nut| 1| 10| Cotter Pin| 1
4| Washer| 1| 11| Hook| 1
5| Bush Ass’y| 1| 12| Bolt| 1
6| Short Screw| 1| 13| Hex Nut| 1
7| Claw Ass’ y| 1| 14| Elastic Washer| 1
OPERATION
Tools required: adjustable wrench, open end wrench, or air ratchet. * DO NOT use impact wrench as it will damage the bead breaker.
-
Place bead breaker onto the rim with teeth and breaker foot between rim & tire bead.
-
Tighten rim clamp jaw until “snug”with hand wrench. Make sure bead breaker teeth and foot are against bead.
-
Continue tightening with wrench until snug. Do NOT over tighten!
-
Using the wrench, begin turning the bead breaker nut clockwise. This will begin driving the bead breaker foot downward.
-
Continue to turn clockwise until bead is broken loose from rim. If necessary, Repeat this process in 2 to 3 locations on each side of the wheel until entire bead is broken.
Address：Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E RANCHO CUCAMONGA, California, 91730 United States of America
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
Technical Support and E-Warranty Certificate
www.vevor.com/support
Made In China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>