Cloud CS-S Series Surface Mount Loudspeakers Installation Guide
- June 13, 2024
- CLOUD
Table of Contents
Cloud CS-S Series Surface Mount Loudspeakers
CS-S Series Surface Mount Loudspeakers
The CS-S Series Surface Mount Loudspeakers are high-quality speakers
designed for various applications. They come in two models:
- CS-S4: 4″ Surface Mount Loudspeaker
- CS-S6: 6.5″ Surface Mount Loudspeaker
Product Usage Instructions
CAUTION – Installation
The speakers must be installed by a qualified speaker technician.
CAUTION – Servicing
Do not attempt to perform servicing unless you are qualified to do so. The
unit contains no user-serviceable parts. Refer servicing to qualified
personnel.
CAUTION – Tap Switch
Before use, check and set the tap switch under the grille to the proper
setting for your system.
EXPLODED VIEW
The following components make up the speaker:
- Snap fit Grille
- Port plug
- Euro block
- Baffle
- Bracket screws
- Bracket
TAP SETTINGS
| Tap | CS-S6 | CS-S4 |
|---|---|---|
| 1 | 16 ohm X 32W | 16 ohm X 20W |
| 2 | 4W | 2.5W |
| 3 | 32W | 20W |
| 4 | 16W | 10W |
| 5 | 2W | 1.3W |
| 6 | 16W | 10W |
| 8 | 8W | 5W |
| 9 | 1W | 0.6W |
| 10 | 8W | 5W |
| 11 | 4W | 2.5W |
| 12 | 0.5W | 0.3W |
| 13 | 4W | 2.5W |
| 14 | 2W | 1.3W |
| 15 | 0.3W | 0.2W |
INSTALLATION
Step 1: Remove speaker from box.
Step 2: Mount bracket to wall.
Step 3: Insert euroblock into rear of speaker.
Step 4: Remove grille and set tap switch to proper setting.
The tap switch is initially set to the highest 100 V position.
Step 5: For increased weather resistance in outdoor applications, press
the port plug into the port on the baffle.
Step 6: Locate the euroblock in the accessory bag and connect the signal
wire. For daisy-chaining, use the LINK output to run to the next speaker.
Step 7: Slide the speaker into the bracket and tighten the bracket
screws.
Step 8: Aim the speaker and tighten the bracket screws.
For more information, visit www.cloud.co.uk or www.cloudusa.pro.
CAUTION – Installation
Speaker must be installed by qualified speaker technician.
CAUTION – Servicing
Do not perform servicing unless you are qualified to do so. The unit contains
no user-serviceable parts. Refer servicing to qualified personnel.
CAUTION – Tap Switch
Before use check and set tap switch under grille to proper setting for your
system.
EXPLODED VIEW
TAP SETTINGS
| Tap | CS-S6 | CS-S4 |
|---|---|---|
| 100 V | 70 V | 25 V |
| 1 | 16 ohm | 16 ohm |
| 2 | X | 32W |
| 3 | 32W | 16W |
| 4 | 16W | 8W |
| 5 | 8W | 4W |
| 6 | 4W | 2W |
INSTALLATION
Step 1
Remove speaker from box.
Step 2
Mount bracket to wall.
Step 3
Locate euroblock in accessory bag and connect signal wire. For daisy-chaining
use “LINK” output to run to next speaker.
Step 4
Remove grille and set tap switch to proper setting. Tap switch is preset to
highest 100 V position.
Step 5
For increased weather resistance in outdoor applications, press port plug into
port on the baffle.
Step 6
Insert euroblock into rear of speaker.
Step 7
Slide speaker into bracket and tighten bracket screws.
Step 8
Aim speaker and tighten bracket screws.
www.cloud.co.uk
www.cloudusa.pro
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>