Cloud Sakura B0BW3VNDFN Solar Lighted Metal Flower Pot Stand Instruction Manual
- May 15, 2024
- Cloud Sakura
Table of Contents
Cloud Sakura B0BW3VNDFN Solar Lighted Metal Flower Pot Stand
ASSEMBLY INSTUCTIONS
SOLAR LIGHTED METAL FLOWER POT STAND
READ THE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND INSTALLATION
IMPORTANT: DOUBLE CHECK CONTENTS BEFORE DISCARDING THE PACKAGING TO
PREVENT LOSING PARTS THAT ARE NEEDED FOR ASSEMBLY
CHARGING AND OPERATION
- Press the button which is located underneath of part “a” to “ON” position for charging. Charge the solar product by placing it under direct sunlight for at least 8 hours. Recommend longer charging time for the first time use.
- The light will work automatically. It will automatically charge under direct sunlight during the day time and illuminate at night.
NOTE: In order to verify that the button is correctly in the “ON” position, cover the solar panel with your hand and light should turn “ON” automatically.
ASSEMBLY INSTRUCTION
REPLACING THE BATTERY
- Step1: Remove the screws to open the battery cover.
- Step2: Remove the old battery and replace with a new 3.2V AA(14500) 500mah Li battery
- Step3: Close battery cover and tight up the screw, To make sure the solar light is fully charged in the sunny day
WARNING:
- Do not throw battery in waste stream or fire as it may explode.
- Do dispose of batteries in accordance with Local, State, and Federal regulations.
- Do not change each electronic parts as toy except replace battery.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (Carbon-Zinc) or rechargeable (NI-CD/NI-MH) batteries.
PARTS LIST
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>