litter robot B0932CC9ZB Ramp Adapter Installation Guide
- October 27, 2023
- Litter-Robot
Table of Contents
litter robot B0932CC9ZB Ramp Adapter
Litter-Robot 4 (with step or handle) can be equipped with the Litter-Robot 3 Ramp using an adapter bracket. No tools are required for installation.
How to install
- Gather the Litter Robot 3 Ramp and adapter bracket.
- Notice the bracket has three adhesive pads. t’s recommended that you practice installing the bracket onto the ramp before removing the protective red tape on the adhesive pad.
- Peel the red protective tape off the adhesive pads and install the bracket onto the ramp as shown. If your Litter-Robot 4 has a step. proceed to Step 4.If your Litter-Robot 4 has a handle, proceed to Step 5.
- Place the ramp above the step and install the ramp by inserting the bracket into the grate of the step as shown. Your installa- tion is now complete. Note: To access the waste drawer, simply lift the ramp off the step and set aside.
- Slide the ramp forward onto the handle as shown. Gently push the bracket onto the handle until you hear a snap. Your installation is now complete. Note: To access the waste drawer, simply pull the ramp off the handle and set aside.
Questions? Visit whiskersupport.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>