Shenzhen AIME Cloud Chuang Intelligent Technology Co Ltd UAQC1393 TV Sensor Screen Sync Backlights Owner’s Manual
Table of Contents
Shenzhen AIME Cloud Chuang Intelligent Technology Co Ltd UAQC1393 TV
Sensor Screen Sync Backlights
Product Information
Specifications
- Model: uLamp TV Sensor Screen Sync Backlights
- Input Power(Max): 5V USB
- Control mode: APP control
- For TV Size: Support various TV sizes
- Colors: RGB and RGBIC
- Support TV size: Not specified
- Light size: LED Strip Light
- APP Supported OS: Android 7.0 above or iOS 11.0 above
Product Usage Instructions
Installation Steps
- Secure the control box near the TV.
- Install the sensor in the middle of the TV.
- Clean the back of the TV before installing the light strip.
- Stick the light strip to either side from the top middle of the TV.
- Avoid sharp objects during installation.
Use of Functions
- Open the uLamp App and add devices.
- Power on the device and select the corresponding TV Light to add.
- Modify device name and control main device switch on the device details page.
- Control features like turn on/off linkage, switch scenes, color settings, and more.
Dimension & Components
- LED Strip Light x1
- Induction & control unit x1
- Power Adapter x1 (5V USB)
TV Sensor Screen Sync Backlights
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Warm tips
- When installing the sensor, please install it in the middle of the TV;
- When installing the light strip, please clean the back of the TV in advance, and there is no water;
- When installing the light strip, please stick it to either side from the top middle of the TV;
- Please stay away from sharp objects during the installation process.
Product Details
| Model | TV Sensor Screen Sync Backlights |
|---|---|
| Input | 5V-2A(RGB), 12V-1.5A(RGBIC) |
| --- | --- |
| Power(Max) | 12W (RGB), 36W (RGBIC) |
| --- | --- |
| Control mode | APP+button+sound control |
| --- | --- |
| For TV Siz | 55-65 inch/65-75 inch |
| --- | --- |
| Colors | 55-65 inch/65-75 inch |
| --- | --- |
| Support TV size | 12.47ft/16.4ft |
| --- | --- |
| Light size | -20-60℃ |
| --- | --- |
| Light size | -20-60℃ |
| --- | --- |
| Supported OS | Android7.0 above or iOS 11.0 above |
| --- | --- |
Dimension & Komponenten
Installation Steps
Download method
- Scan the QR code to download
- App Store download or App Store download
- IOS users can search for “uLamp” on the Apple App Store App Store to download
- Android foreign users can search for “uLamp” on Google Play to download; Android domestic users can search for “uLamp” in the app store to download
Use of functions
-
Add devices
Open the uLamp App, and the home page of the app without adding the device is shown in the following figure. -
After the device is powered on
Click the “Add Device” button or the “+” button at the bottom of the homepage to enter the device addition page, and select the corresponding TV Light to add.
-
On the device added successfully page
You can modify the device name after the device is added successfully, and enter the home page of the device details page by default after saving. -
The device details page can control the main device switch, turn on/off linkage, switch scenes, etc., as shown below
-
RGBIC device details page
-
Main equipment TV Light switch button;
-
Click to modify the name of the main device;
-
Scene mode, corresponding to (6) 4 scene classifications, a total of 24 scene modes, namely: Iceland Blue, Glacier Express, Cloud Sea Scene, Sea Fireworks, Snow Cabin, Firefly Night, Game, Holiday, Work, Party, Trend,Sports, Christmas, Valentine’s Day, Halloween, Thanksgiving, Mother’s Day,Father’s Day, Summer Madrigal, Sea Dream, Love and Dream, Spring
Fishing, Neon World, Dreamland; -
Click to enter the segmented smudge color page, which supports global smearing, segmented smearing, erasing, as well as colored cards and recommended combination color；
-
Color sensor work on/off button;
-
DIY scene mode, click the “+” button to enter the DIY page, support full segmentation/segmentation, effect, color, brightness, speed and other settings;
-
Scene mode/color adjustment. corresponds to (3), (4), (6);
-
Music rhythm mode, support 6 music rhythm modes, namely: rock, jazz, classical, rolling, energy, spectrum;
-
Settings. Supports setting of countdown, number of lamp beads and line order
-
RGB device details page
-
Main device TV RGB Light switch button；
-
Sub-equipment linkage switch, turn on/off linkage, (need to buy matching linkage products, no sub-equipment can be turned off)；
-
TV color sensing settings；
-
Scene mode/music mode；
-
TV synchronous sensor on/off；
-
Color saturation adjustment；
-
TV sensor color sensitivity adjustment；
-
Color Shadow enhanced on/off；
-
Color palette and brightness adjustment；
-
The timing switch is set；
-
Product equipment information.
Frequently Asked Questions (FAQ)
Can I use the uLamp with any size of TV?
The uLamp supports various TV sizes, but make sure to check compatibility before purchase.
How do I control the color settings of the lights?
You can adjust color saturation, color sensitivity, color shadow, color palette, and brightness through the app's device details page.
Is it safe to install the light strip on any part of the TV?
It is recommended to install the light strip on either side from the top middle of the TV to avoid interference with TV functions.