HomeX Recliner Sofa with Massage and Heat User Guide

HomeX Recliner Sofa with Massage and Heat

Note:
This instruction contains important safety information. Please read and keep it for future reference.

Cautions

1. Please read this manual before operating this equipment.
2. NOTE: Please use this equipment according to the instructions in this brochure to avoid accidents.
3. Keep children and pets away from the sofa during the operation. Unplug the power cord during a thunderstorm or if you do not intend to use for a long time.
4. Please DO NOT disassemble or repair the equipment by uncertified personnel to avoid the failure or damage of the product or an electric shock to the human body.
5. Please DO NOT place anything under the sofa when lowering down the sofa.

INSTALLATION

Step 1:
Please insert A to C, make sure that the metal part on A can be completely inserted into the metal part on C (Please see details). Push hard until you feel or hear backrest snap into place.

Step 2:
Please install two pieces of armpad B through zipper to the right and left side of C.(Please see details).

Step 3:

• There are four sockets on backrest A,two sockets on seat C.
• Please connect red one from A to the red one from C
• Then connect white one from A to the white one from C
• The rest two are for massage and power. Please connect those two to D and E separately.
• Congratulations! You are awesome, all the assembly is over here. Please find the usage guide next page.

For massage & heat function 

1. Press the ON/OFF button to switch the massage unit on. The massage unit will start in Mode 1 and will automatically shut down after 15 minutes if no other button is pressed. Press the ON/OFF button again whilst in the massage mode to switch off the unit.

2. Press the HEAT button to switch the heat function on. The HEAT light will be lit when this function is on. Press the HEAT button again to switch the heat function off.

3. Press the MODE button to select the massage mode.The
   current massage mode is shown by one of the five MODE light being illuminated.

4. Press the INTENSITY button to increase the intensity of the massage vibrations. After pressing the button, the new intensity will be shown momentarily by illuminating of the INTENSITY lights. Once the intensity is at maximum, pressing the button again will reset the intensity to its lowest level.

For recline function

1. While seated, reach the right side of the sofa to find the handle and pull. lean back hard, the backrest will lie down and footrest can be extended that allows you to stretch your body.
2. Sit upright, and retracted the footrest with your feet until you feel or hear the footrest snap into place.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>