Ford Crown Victoria Fuse Box Diagram
- June 8, 2024
- Ford
Table of Contents
Below is the passenger fuse diagram for the second-generation Ford Crown Victoria (EN114), produced in 2007, 2008, 2009, 2010, and 2011. You may also be interested in the Engine Fuse Box Diagram for this vehicle. The fuse panel is located below and to the left of the steering wheel by the brake pedal. Remove the panel cover to access the fuses. Inside the fuse/relay panel covers, you can find the fuse/relay label describing the fuse/relay name and capacity.
Fuse Box Location
Diagram
Fuse Ratings and Descriptions
| Fuse Number | AMP Rating | Description |
|---|---|---|
| 1 | 10A | Ignition (START) – Starter relay coil, DTRS |
| 2 | 7.5A | Power mirrors, Door lock switches, Mirror switch, Keypad switch, |
Decklid switch, DDM (Driver’s door module), Cluster
3| 5A| Ignition (START) – Audio mute, Police PDB (Police vehicles only)
4| 10A| LCM (switch illumination), Autolamp sensor
5| 7.5A| Ignition (ON/ACC) – LCM
6| 7.5A| LCM
7| 10A| Ignition (ON/ACC) – Wiper module
8| 10A| Electronic Automatic Temperature Control (EATC) module (vehicles
equipped with EATC only)
9| 7.5A| Ignition (ON/ACC) – Door lock switch illumination, Heated seat switch
illumination, Moon roof, Overhead console, Radio, Antenna, Electrochromatic
mirror, Window relay coil (non-Police vehicles only), Window and decklid relay
coil and Police ON/ACC relay coil (Police vehicles only)
10| 15A or 20A| Hazards (non-Police vehicles – 15A; Police vehicles – 20A)
11| 15A| Ignition (ON) – Turn signals
12| 15A| Audio
13| 10A| 2007-2008: Ignition (ON) – Anti-lock Brake System (ABS) module, Rear
Air Suspension Module (RASM), Variable Assist Power Steering (VAPS), Cluster;
2009-2011: Ignition (ON) – Rear Air Suspension Module (RASM), Cluster
14| 15A| Taxi, Adjustable pedals
15| 10A| Ignition (ON) – EATC module, A/C mode switch (vehicles equipped with
manual A/C only), A/C blower relay coil
16| 20A| 2007-2008: Cigar lighter, OBD II;
2009-2011: OBD II
17| 10A| Ignition (ON) – A/C mode switch (vehicles equipped with manual A/C),
Blend door, Heated seat modules, BTSI (Floor-shift transmission)
18| 15A| Lighting control module (interior lighting)
19| 10A| LCM (Left-hand low beam)
20| 10A| 2007-2008: Ignition (ON/START) – Back-up lamps;
2009-2011: Ignition (ON/START) – Back-up lamps, Anti-lock Brake system (ABS)
21| 10A| LCM (Right-hand low beam)
22| 10A| Ignition (ON/START) – Restraint Control Module (RCM), Occupant
Classification Sensor (OCS), Passenger Airbag Deactivation Indicator (PADI)
23| 15A| Multi-function switch (Flash-to-pass), LCM (High beams)
24| 10A| Ignition (ON/START) – Passive Anti-Theft System (PATS) module,
Powertrain Control Module (PCM) relay coil, Fuel relay coil, Ignition coil
relay coil
25| 15A| 2007-2009: LCM (Park lamps, license lamps);
2010-2011: LCM (Park lamps, corner lamps, license lamps)
26| 10A| 2007-2008: Ignition (ON/START) – Cluster, LCM, Overdrive cancel switch;
2009-2011: Ignition (ON/START) – Cluster, LCM, Overdrive cancel switch, Traction control switch
27| —| Not used
28| 7.5A| Brake signal, LCM (brake transmission shift interlock), ABS
29| 2A| Hazard in (Police vehicles only)
30| 2A| Battery saver (Police vehicles only)
31| 5A| Key in (LCM)
32| 2A| Hazard out (Police vehicles only)
33| 10A| 2007-2008: Ignition (ON/START), Fire suppression module (if equipped)
(Police vehicles only);
2009-2011: Fire suppression module (if equipped) (Police vehicles only)
Relay 1| Full ISO relay| Window relay, Decklid (Police vehicles only)
Crown Victoria Recalls, Complains, and Vehicle Specs.
crown-victoria-owners-manual [pdf]