luminii LLHE48WET-T LineLED Wet 24V LED Strip Light Instruction Manual
- June 4, 2024
- luminii
Table of Contents
luminii LLHE48WET-T LineLED Wet 24V LED Strip Light
Please read all instructions prior to installation and keep for future reference!
- THE PRODUCT SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN
- ENSURE POWER IS OFF AT FUSE BOX PRIOR TO INSTALLATION TO PREVENT ELECRICAL SHOCK
- USE ONLY WITH CLASS 2 POWER UNIT
- SUITABLE FOR WET LOCATIONS
- FOR UNDER-CABINET OR SHELF MOUNT
- AVOID EXPOSURE TO DIRECT SUNLIGHT
- NOT SUITABLE FOR APPLICATIONS WHERE LEDS CAN BECOME SUBMERGED
Installation Instruction
- Remove the paper backing from the lineLED and firmly press down. Making sure there are no air bubbles that can cause surface irregularities to the lineLED. Do not remove the adhesive, removing the adhesive may cause arcing of the lineLED tape.
- If necessary, add a mounting clip every 12” for additional support.
- Always ensure the power to the power supply is off! Follow the diagram to connect power feed wires to the power supply. Refer to power supply instructions for wiring line voltage side.
LUMINII RESERVES THE RIGHT TO CHANGE SPECIFICATIONS & INSTRUCTIONS WITHOUT NOTICE.
7777 Merrimac Ave Niles, IL 60714 T 224.333.6033 F 224.757.7557 info@luminii.com. www.luminii.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>