kogan NBSEESW360A Kids 360 Degree Seesaw User Guide

kogan NBSEESW360A Kids 360 Degree Seesaw

SAFETY & WARNINGS

• Ensure to read all warnings and instructions in this user guide prior to assembly and use. Retain this user guide for future reference.
• This seesaw should be assembled by an adult.
• Adult supervision is required at all times when children are using the seesaw.
• Ensure the seesaw set is fully secure and placed on a level surface when in use.
• This seesaw should be installed on impact absorbing surfaces (for example, sand, wood chips, rubber, foam).
• Do not use the seesaw on concrete, asphalt, or any other hard surfaces.
• Only use the seesaw in the areas that are at least 1.8m clear of structures, obstacles, objects, electrical wires, and other people.
• This seesaw is intended for domestic indoor and outdoor use.
• Do not orientate the seesaw towards the sun if using outdoors.
• A maximum of2 children can use the seesaw at any given time.
• This seesaw is suitable for children up to 25kg.
• This seesaw is suitable for children between 3-8 years old.
• The maximum fall height from this seesaw is 60cm. Ensure all screws and nuts are checked for tightness regularly. Tighten if necessary.
• Over extended use, this seesaw may develop rust. Sand off the rusted areas and repaint with non-lead based paint when required.
• Do not make modifications to the seesaw.
• Be aware that any exercises involving physical contact may result in potential injuries.
• If any component is damaged, stop use and contact help.Kogan.com for assistance.
• Inspect the seesaw periodically for any signs of regular wear and tear. A lack of inspecting may lead the seesaw to become a potential safety hazard.

OVERVIEW

ASSEMBLY

• Step 1 : Align the holes on the seats (C) and central assembly (E). Place a washer on top of one of the aligned holes and using the Allen key (J), secure the screws through the washer (A). Insert and tighten a nut (D) on the underside of the aligned hole.
• Repeat this process for the remaining three aligned holes.
• This completes the seat assembly.
• Step 2: Secure the base components (H) and cap (G) on top of each other.
• This completes the base assembly.
• Step 3: Place the seat assembly onto the base assembly.
• Step 4: Secure the ball cushions (F) onto the seats (C).
• Step 5 : Inflate the ball cushions (F) using the needle (I) and an air pump (not supplied).

Need more information?

• We hope that this user guide has given you the assistance needed for a simple set-up.
• For the most up-to-date guide for your product,  as well as any additional assistance you may require, head online to help.kogan.com
• kogan.com

Documents / Resources

| kogan NBSEESW360A Kids 360 Degree Seesaw [pdf] User Guide
NBSEESW360A Kids 360 Degree Seesaw, NBSEESW360A, Kids 360 Degree Seesaw, Degree Seesaw, Seesaw
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>