InCarTec 23-005 Line Output Converter LOC Instruction Manual
- June 13, 2024
- InCarTec
Table of Contents
InCarTec 23-005 Line Output Converter LOC
Installation Instructions
The Line Output Converter (LOC) should be installed on the stereo’s speaker output wires or the output on an amplifier of up to 80 watts per channel. These wires can be found behind the vehicles head unit/ stereo, on the outside of an amplifier, or on the input terminals
Wire Colour and function
The audio input wire colours are EIA standard for car stereo applications as follows:
Input Harness
White = Left Front (+) input
White/Black = Left Front (-) input
Grey = Right Front (+) input
Grey/ Black = Right Front (-) input
Green = Rear Left (+) input
Green/ Black = Rear Left (-) input
Power Harness
Yellow = Battery +12v input
Black = Power (-) ground input
Blue = Remote +12v output
Brown = Reference Ground (-)
Please Note
Be sure that all audio input connections are polarized or in phase with each other. That is, the positive wires from the audio source need to be connected to the corresponding positive input wires of the LOC. The same goes for the negative audio wires. Failure to do this will result in poor bass response and low-quality audio.