InCarTec ISO-10487 ISO Leads Instructions
- October 30, 2023
- InCarTec
Table of Contents
ISO-10487 ISO Leads
Product Information: Understanding ISO Leads
ISO-10487, created in 1995, is a type of connector that is commonly used for car audio systems. Most aftermarket car radios use these connectors. There are two types of male ISO connectors, A and B, where Connector A is used for power and Connector B is used for speakers. On the other hand, the female connector is used on the Car Radio loom or mounted in the chassis of the radio.
ISO Connector (plug side view )
- B1 Right Rear +
- B2 Right Rear –
- B3 Right Front +
- B4 Right Front –
- B5 Left Front +
- B6 Left Front –
- B7 Left Rear +
- B8 Left Rear –
There is also a chassis mount ISO and a Female ISO with Butt connectors. The latter is used to convert radios without ISO connections. Pin out details for the chassis mount ISO are as follows:
- A1 /Not used
- A2 /Not used
- A3 /Not used
- A4/+12V Perm
- A5 Antenna Power Out
- A6 Illumination
- A7 + 12V Switched
- A8 Ground
20-022 Female ISO with Butt connecters .Used to convert radios without ISO connections.
Typical Color Code for Aftermarket Car Radio
The typical color code for an aftermarket car radio is as follows:
- Right Rear +:
- Right Rear -:
- Right Front +:
- Right Front -:
- Left Rear +:
- Left Rear -:
- Left Front +:
- L eft Front -:
- +12V Perm:
- Antenna Power (Remote On Out):
- Illumination:
- Switched +12v:
- Ground:
Read User Manual Online (PDF format)
Loading......