InCarTec V363 Car Stereo Fitting Kit Instruction Manual
- June 4, 2024
- InCarTec
Table of Contents
29-025 Self-pin universal patch lead
Look at the diagrams
Use either the 3.5mm jack plug or the single Brown wire in pin locations 1,2 &
3
Use the link leads to suit the type of head unit you are fitting.
Carefully lift the latch on the plastic housing to remove a link lead
WHEN FINISHED ALWAYS PLUG THE PATCH LEAD TO THE CONTROL BOX FIRST, BEFORE
YOU CONNECT THE CAR HARNESS TO THE POWER
| Make sure the terminals are inserted the correct way around.
Terminal orientation for top row
---|---
| Terminal orientation for bottom row
| Make sure the terminals are fully inserted.
If the terminal is still visible from the wire entry side of the connector, it
is not fully inserted.
| The terminal should be visible looking from above/below the connector.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>