Rinnai Linear Collection Mesh Dress Guard Instruction Manual
- June 9, 2024
- Rinnai
Table of Contents
Rinnai Linear Collection Mesh Dress Guard
Linear collection
Mesh dress guard installation
Ensure the gas and power are disconnected before commencing any work as installation requires the glass panel to be removed
No fixing required. The mesh guard, via two top slots, sits over the glass
frame tabs, with the lower section secured in the same channel that holds the
glass front. 
-
Remove the glass front
The glass front sits in a narrow channel at the bottom of the fire and is held in place by glass retainer latches positioned at the top, either side of the unit (the 1500 model has an extra glass retainer latch in the center).
In late 2022 modifications were made to the upper louvre so it clipped in place as opposed to being screwed in place. Step a will depend on which model you have.-
Louvre screwed in place
To remove the glass, use a screwdriver , undo and remove the three screws holding the louvre in place—put the louvre to one side. The image on p. 2 identifies the different components.
Louvre clipped in place
To remove tilt and rotate the bottom edge out, and remove the louvre—place to one side. -
Push the top glass retainer latches up and slightly to one side to release the top section of the glass.
-
Using the frame tabs at the top of the glass frame, lift up and gently slide to the right and rotate the glass until the left section comes free, then move the glass panel to the left to remove the right section.
-
-
Slide the mesh guard onto the glass frame tab
Align the two mesh guard slots to the glass frame tabs, and slide the mesh over the glass panel.
Reinstall the glass panel complete with guard Reinstall the glass panel with the mesh guard in the reverse order outlined in step 1. When you push down the glass retainer latches, due to the extra thickness, you may need to use some tension and pull them out slightly so they fit over the glass and mesh.
Removing the glass panel 
13582-C 03-22 Rinnai NZ Ltd (0800 746 624) page 2 of 2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>