COOLON BNS Batten Light Instruction Manual
- June 13, 2024
- COOLON
Table of Contents
**COOLON BNS Batten Light Instruction Manual
**
Product Dimensions
NOTE: Recommended minimum distance from endcap (both sides) 2
NOTE: Lanyard / chain not provided by Colón
VOLTAGE IN| POWER| OPERATING TEMP.| IP RATING| IK
RATING
---|---|---|---|---
176 – 305VAC, 47 – 63Hz| 75W| -20°C ≤ Tamb ≤ 50°C| IP66| IK09
Class II insulated LED luminaire
INSTALLATION INSTRUCTIONS
Slide in the rhomb nut into the channel through the opening (x4).
Slide the rhomb nut to final position; approximately 100mm from the end cap.
INSTALLATION INSTRUCTIONS – SURFACE MOUNTED
Mount stainless steel brackets to surface using suitable bolts.
Align the unit rhomb nut holes with the brackets. Secure with supplied screws. Tighten until the bracket is secured (x4).
Pre-assemble the eyebolt as indicated in each bracket. Tighten the nut until the eyebolt does not rotate.
Put on the bracket and align with the rhomb nut holes. Secure with supplied screws. Tighten until the bracket is secured (x4). Suspend as desired.
Once the product has reached end of life, unit is to be disposed of in accordance to local e-waste laws or regulations. Do not dispose of these products as unsorted municipal waste: take them for recycling. For information on your nearest recycling point, check with your local waste authority
[email protected] • aus. 1300 287 533 • intl. +613 8681 3633 • www.coolon.com.au
As a matter of continual improvement, the requirements and recommendations in our manuals evolve to reflect new industry requirements and the latest feedback from the field.
The Coolon team is working hard to ensure optimal product operation and the safety of all users, please check our website periodically to ensure you are up to date with the latest information. Product must be installed by a suitably qualified person. All documentation is subject to change without notice.