COOLON PLUME 10 AC RGBW LED Lighting Installation Guide

June 12, 2024
COOLON

COOLON PLUME 10 AC RGBW LED Lighting

Product Information

  • Profile Dimensions:
    • Width: 142mm
    • Height: 134mm
    • Thickness: 14mm
    • Length: 50mm
  • Ball Joint Mounting Bracket Rotation: 131mm
  • Supplied with mains leader + AU Australian Plug
  • Packaging Dimensions:
    • Width: 90mm
    • Height: 290mm
    • Length: 260mm
  • Packaged Weight: 1.3kg (contents can vary)
  • CASAMBI READY: Can be easily controlled and automated using the Casambi app and compatible switches

PROFILE DIMENSIONS

With Ball Joint Mounting BracketCOOLON-PLUME-10-AC-RGBW-LED-
Lighting-1

Ball Joint Mounting Bracket RotationCOOLON-PLUME-10-AC-RGBW-LED-
Lighting-2

ATTENTION

  • Please observe / follow the instructions methodically.
  • Please ensure the units are handled with extreme care.
  • Do not remove product from packaging prematurely. Only remove from packaging when ready for installation.
  • Failure to observe installation instructions and handling will void warranty of the product.
  • Fittings must be installed by a licensed electrician.
  • Before installing, make sure the power supply is switched off or mains cable is disconnected.

PACKAGING DIMENSIONS

  • PACKAGED WEIGHT: 1.3kg (contents can vary)

SPOT VISOR

  • STEP 1
    Align spot visor with Plume Spotlight. Spot visor can be mounted at 0° or 90°.

  • STEP 2
    Slide spot visor over spotlight body until the end stop is in contact.

  • STEP 3
    Insert screw with star washer and tighten with hex key (1.5Nm).

BALL JOINT MOUNTING BRACKET

  • STEP 1
    Pick up base plate and select 2 suitable screws, refer to the table below for details.

  • STEP 2
    Pick up base cover and align with base plate. Slot must be parallel to base plate edge. Snap base cover onto base plate as shown.

  • STEP 3
    Loosen adjustment screw until bracket arms fit over the ball head stud.

  • STEP 3
    Move / rotate spotlight to desired position, hold tight and fasten adjustment screw (recommended torque 10Nm).COOLON-PLUME-10-AC-RGBW-LED-
Lighting-11

CASAMBI READY

archsales@coolon.com.au
aus. 1300 287 533
intl. +613 8681 3633
www.coolon.com.au
All documentation is subject to change without notice. Refer to our website for the latest information.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals