COOLON TNR-0.6 Emergency Tunnel Ray Industrial LED User Manual
- June 12, 2024
- COOLON
Table of Contents
COOLON TNR-0.6 Emergency Tunnel Ray Industrial LED User Manual
Product Dimension
Technical Specifications
Voltage Range
22.5 – 26VDC
Temperature Range
-20 to +50°C
IP Rating
IP66
IK Rating
IK09
Mounting Plate
INSTALLATION INSTRUCTIONS
Step 1
Choose luminaire position and orientation.
When choosing the location of Tunnel Ray luminaire, please ensure that sufficient clearance is allowed for the airflow through the heatsink. Avoid blocking the air vents
Horizontal Mounting
Vertical Mounting
In a vertical mount, mount the TNR in the following orientation to maximize
the airflow through the heatsink.
Step 2
Securely mount the Tunnel Ray Luminaire. Do not open the junction box or lid.
Step 3
Connect the Luminaire cable to the Coolon Emergency Pack. Do not unplug or
loosen the sealed cable glands.
Step 4
Wire Emergency Pack according to the instructions provided with the unit.
Turn the Unit Isolation Switch to the “ON” position. Close Emergency Battery unit and secure. Plug Luminaire connector into the Emergency Battery unit.
Testing Connection
When unit is first connected, the Emergency battery will commence charging.
During mains presence the unit Charge Monitor will illuminate red.
To test the connection, press the Test Button. When pressed, the Charge
Monitor will turn off and the luminaire will illuminate.
If luminaire does not illuminate when button is pressed, please check the
wiring.
If Charge Monitor is not illuminated while Test Button is not pressed and
mains is present, please check the Unit Isolation Switch is not in the “OFF”
position. If Unit Isolation Switch is in the “ON” position, please check the
wiring.
Emergency Power Pack
Documents / Resources
|
COOLON TNR-0.6 Emergency Tunnel Ray Industrial
LED
[pdf] User Manual
TNR-0.6 Emergency Tunnel Ray Industrial LED, TNR-0.6, Emergency Tunnel Ray
Industrial LED, Tunnel Ray Industrial LED, Ray Industrial LED, Industrial LED,
LED
---|---