KISS 51TX6BOObKL Falscara DIY Eyelash Extension Lengthening Wisps Instructions
- June 15, 2024
- KISS
Table of Contents
51TX6BOObKL Falscara DIY Eyelash Extension Lengthening Wisps
Instructions
51TX6BOObKL Falscara DIY Eyelash Extension Lengthening Wisps
USE & TIPS
Watch how-to video on Falscara.com. Do not apply mascara before or after
Falscara.
NOTE: Bond & Seal, Applicator, Remover, and Overnighter (all not
included) are sold separately and in FALCARA Starter Kits.
Step 1: Brush a light coat of BOND on natural lashes. A little goes a
long way!
Step 2: Use APPLICATOR to pluck a WISP from the tray. Pick up a WISP from
the middleouter end for optimal control. One by one, gently place the WISPS
underneath the base of your natural lashes, slightly away from the waterline.
Apply wisps starting from the outer corner of lash line, working inwards (or
vice versa). Place WISPS right next to each other for a seamless look.
Step 3: Dab a thin coat of SEAL under WISPS to eliminate any sticky
residue and hold WISPS in place. Pro tips: If needed, after applying SEAL
under WISPS, use the APPLICATOR or your fingers to squeeze the WISPS against
your natural lashes; this helps the WISPS adhere for a more secure hold.
TO REMOVE:
- Saturate a cotton pad with Falscara REMOVER or oil-free makeup remover.
- Place pad over eyes for 10 seconds, then gently wipe or peel off WISPS and BOND & SEAL.
TO REUSE WISPS:
- Place used WISPS on a paper towel, coat with Falscara REMOVER or oil-free makeup remover, then let sit for 10 seconds.
- Saturate a cotton swab with remover and gently wipe away BOND & SEAL residue from the WISPS. Store WISPS in original packaging.
CAUTION: KEEP OUT OF REACH OF CHILDREN.