Aesfee AF-8088 Professional Foil Shaver for Men User Manual

Aesfee AF-8088 Professional Foil Shaver for Men

IMPORTANT SAFETY INSTRUCTIONS

Please read the following instructions before using your new Aesfee foil shaver, especially close supervision is necessary when this shaver is used by children or invalids. Give it the care that a fine precision-build instrument deserves, and it will give you years of service.

DANGER
To reduce the risk of electric shock

1. ALWAYS unplug this shaver from the electrical outlet immediately after using(expect when charging the shaver).
2. Do not reach for a shaver that has fallen into the water while plugging, unplug immediately.
3. Unplug this shaver before cleaning, removing, or assembling parts.

WARNING
To reduce the risk of burns, fire, or injury to persons:

1. Never leave a plugged-in shaver unattended.
2. This shaver is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they are under the supervision or instruction concerning the use of the shaver by a person responsible for their safety. Children should be supervised to ensure that they do not play with the shaver.
3. Use this shaver only for its intended use as described in this manual. DO NOT use the attachments not recommended by Aesfee.
4. DO NOT pull, twist or wrap the cable around the shaver. Keep the cable away from heated surfaces.
5. Never drop or insert any object into any opening on the shaver.
6. DO NOT use this shaver with a damaged or broken foil or cutter, as injury to the skin may occur.
7. Always attach a plug to the shaver first, then to the outlet, To disconnect, turn all controls to OFF, then remove the plug from the outlet.
8. DO NOT crush or heat over 212 ‘F (100 ‘C) or incinerate the shaver due to the risk of fire, explosion, or burns.

What’s in the package?

• 1 x Foil shaver
• 1 x Type-C charging cable
• 1 x Cleaning brush
• 1 x User manual

WARNING
Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user”s authority to operate the equipment. This device complies with Part 15 of the FCC rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interface, and (2) this device must accept any interference received, including interference that may cause undesired operation.

BASIC INSTRUCTIONS FOR USE

Battery Indicator:
The shaver supports the battery indicator function. When the battery power is lower than 10%, the lowest light flashes, it means that the battery is running low and needs to be charged. When charging, the indicator light will flash. All the three lights will stay light on when the battery is fully charged. When shaving, the indicator lights will show the battery level, from three lights to one light.

Charging
The shaver can be quickly charged through the Type-C port. The package included a USB Type-C charging cable.

1. Please make sure to turn the shaver off before charging.
2. Please charge this shaver in an environment where the surrounding temperature is between 41 ‘F -95 ·p (5 ‘C -35 “C ). Please DO NOT charge or place the shaver in direct sunlight, near heat vents, or radiators.
3. Use the included USB Type-C cable to connect the shaver to any standard DC 5V output ports, such as USB charger, car charger, power bank, computer/laptop’s USB interface to charge the shaver, the battery indicator will light up and flash to indicate that the charging has begun. After fully charging, the indicator end flash and 3 lights all keep the light on.
4. It takes two hours to fully charge, it can keep running for 90 minutes.
5. To prolong the lifetime of the shaver, please unplug the shaver after fully charging.
6. Please store the USB Type-C cable after charging for next use. Make sure the shaver is in the OFF position when the shaver is not operating.

Failure to Charge?

1. Make sure voltage is present at the USB port (confirm with an appliance you know is working).
2. Make sure the USB Type-C cable is working (confirm with an appliance you know is working).
3. Checking to make sure the USB Type-C cable is plugged firmly into the shaver, Twist the Type-C cable connector slightly to ensure a good electrical connection. If failure to charge still exists while the shaver is under warranty please contact Aesfee customer support for examination and/or replacement.

Use the Shaver
This is an IPX7 waterproof professional foil shaver, you can dry or wet shave even in the shower. After use, you can wash it under the tap for quick cleaning. :

1. The shaver works the best on dry skin, Therefore, please shave before washing your face/body or after washing your face/body for a while.
2. If hair is longer than 1/32″,begin by cutting the hair down first with a hair clipper.then use an Aesfee foil shaver for a smooth and close shave.
3. Remove the protective cover of the foil shaver.
4. Check to make sure the outer shaving foils and inner blades are not damaged. Replace damaged parts before using. DO NOT use it if the blades or shaving foils are damaged to avoid damaging your skin.
5. Ensure that the foil shaver is charged.
6. Press the ON/OFF switch to take on the shaver.
7. Men whose skin is sensitive or easily irritated by shaving, or who suffer from a skin allergy, should test one section on the leg or arm before using the foil shaver.
8. Hold the foil shaver at a right angle to the area you want to shave and run the double shaving foils carefully along your skin. Tip: Pull your skin tightly with your fingers in inaccessible areas to achieve optimum results.
9. To achieve the closest shave and avoid unnecessary wear on the foils, be sure that both foils contact the skin simultaneously at all times. Hold the shaver at an angle where only one foil contacts the skin will cause distortion of the foil and may result in skin irritation.
10. To facilitate cutting and avoid foil wear, use minimal pressure to apply the shaver to your skin.
11. DO NOT push the shaver on the skin too hard as it could cause irritation, make the shaver warm and prevent a perfect shave.
12. To maximize shaving comfort, be sure to clean the shaver thoroughly after each use.
13. Please note that your skin takes time to get used to the shaving system. Usually, it takes 2-4 weeks for your skin to adapt to the shaver, so please DO NOT change shaving instruments in this period.

How to Use the Travel Lock

• This is very useful feature that prevents the shaver from unexpected starting in your bag when you are traveling.
• Press and hold the ON/OFF switch for 3 seconds while the shaver is off will LOCK/UNLOCK the shaver. NOTE: When you cannot start the shaver, please check whether it is caused by the travel lock feature. If it is, press and hold the ON/OFF switch for 3 seconds to close the travel lock to start the shaver.

Use with Type-C Cable
If the shaver power off while in use, the charging cable can be attached to continue use in cabled operation. The shaver will continue to charge while in use with the cable attached.
IMPORTANT
Blades must be cleaned and oiled regularly for proper functioning. Failure to regularly clean and oil the blades will accelerate the wear of foil assembly and the blades.

USER MAINTENANCE INSTRYCTIONS

If the shaver is to remain unused for a long period of time, store it in a safe, cool, and dry place. DO NOT hang the shaver by the charging cable. Other than the recommended maintenance described in this manual, no other maintenance should be performed.
Important: For best shaver performance and results, it is recommended that you replace your shaver’s foil assembly and blades simultaneously every year. Please pay attention to the following items when maintaining the shaver

1. DO NOT remove the foil head assembly while the shaver is switched on. ALWAYS switch the shaver off.
2. Be careful when dealing with the blades, as they are very sharp. risk of injury.
3. Never press the blades or the shaving foils, and do not touch them with hard objects as this can cause irreparable damage to the shaver or parts, leading to skin damage.
4. When cleaning, do not use any abrasive or sharp objects. They can cause irreparable damage to the shaver or parts, leading to skin damage.

Cleaning

1. Please make sure to turn the shaver off when cleaning.

2. Regular cleaning of the shaver guarantees a better shaving performance.
   The blades must be cleaned and oiled regularly for proper functioning.
   Failure to regularly clean and oil the blades will accelerate the wear of foil assembly and the blades.

3. To clean the external surface of the shaver, use a damp cloth. DO NOT use strong detergents or other chemicals.

4. DO NOT use a hair dryer or heater to dry the shaver.

Please follow the steps below to clean the shaver to maintain the best performance:

1. Press the release buttons on the sides of the foil head assembly and take the foil head assembly off by pulling it with your hands.

2. Rinse the foil head assembly and the blades on the shaver unit under running water, to make debris away, or use the cleaning brush to whisk away debris on and around the foil head assembly and the blades on the shaver unit.

3. Please DO NOT use a towel, a paper towel, or similar objects to dry the shaver blades. Otherwise, you could damage the shaver head foil.
4. Please assembly the foil head assembly back in the reverse order.
5. You can use degreasing solutions (for example, alcohol) to assist the foil head assembly cleaning if necessary. Please use a drop of oil to lubricate the blades afterward to avoid the wear of the foil head assembly.

Replace Foil Head Assembly

1. Remove the foil head assembly by pressing the release buttons located on the side of he foil head: hold the foil head assembly on both sides and lightly pull away from the shaver unit.
2. Take the replacement foil head assembly out of the package. Align the replacement foil head assembly over the blades. Carefully move the replacement foil head assembly down towards the shaver unit until it firmly snaps into place. Be careful not to damage the foil or blades while installing.

Replace Inner Blades

1. To remove blades, place your fingers on each side of the blade and gently pull up and away from the driveshaft.
2. To replace blades, remove the new blades from the package. Align the blade about the driveshaft and lightly push down until it snaps into place.
3. Place the foil head assembly, turn the shaver on to ensure it is working correctly.

ATTENTION:

  * The product you have purchased contains a rechargeable battery, the battery is recyclable. At the end of its life, under various states and local laws.it may be illegal to dispose of this battery into the municipal waste stream.
  * Check with your local solid waste officials for details in your area of recycling options proper disposal.

REMOVE THE BATTERY

• The battery inside this shaver contains substances that pollute the environment. When discarding this product, please remove the battery and drop it off at the collection site designated by the government.
• Please disconnect the charging cable and make sure that the battery is completely exhausted before removing the battery from the shaver. If there is still power left in the battery, please turn the shaver on until the motor stops running.
• You can also remove the battery from the shaver yourself. Use a screwdriver to remove the 2 screws on the bottom of the shaver body, and remove the cover, then remove the battery with a soldering iron or plier.
• After removing the battery, DO NOT connect the shaver with the cable with power.

WARRANTY & CUSTOMER SUPPORT

• 15 months warranty and lifetime technical support from the date of order.
• For questions, assistance, technical support, or warranty claims please contact us at the below email address, please include your Amazon order
• ID, region and product model name.
• e-mail: [email protected]

ABOUT COMPANY

• Aesfee International Limited
• Add: 1104, Block A, Zhongguan Times Square, No. 4168 Liuxian
• Avenue, Nanshan District, Shenzhen 518055, China
• Website: www.aesfee.com
• E-mail: [email protected]
• EU Representative
  • Qing UG (haftungsbeschriinkl)
  • Undinestr. 7, 12203 Berlin, Germany
• UK Representative
  • JunBright Lid
  • 51 Chalton Street, London, NW1 1 HY England

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>