Alphacool RTX 4080 Eisblock Aurora Acryl Reference Design with Backplate Instruction Manual
- June 13, 2024
- ALPHACOOL
Table of Contents
- Safety instructions
- Digital guide
- Accessories
- Check compatibility and prepare graphics card
- Remove spacers
- Place thermal pads on cooling block
- Apply Thermal Grease
- Install PCB
- Place thermal pads on PCB backside
- Mount PCI bracket and backplate
- Connect ARGB lighting
- Screw in screw plugs with the tool
- Customer Support
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Alphacool RTX 4080 Eisblock Aurora Acryl Reference Design with Backplate
Safety instructions
Digital guide
Accessories
Check compatibility and prepare graphics card
Check compatibility
Before starting the cooler assembly, compare your card with the pictures in our configurator. To do so, visit https://www.hwconfig.com and search for your graphics card or cooler model. For a definitiv identification, you can also compare the PCB number. The cooler was designed for a special PCB layout. Occasionally, graphics card manufacturers may revise the design of their card slightly, causing the cooler not to fit on later models. During assembly, please make sure taller parts have enough space around them and that the cooler does not damage your graphics card.
Alphacool International GmbH is not liable for assembly errors occurring due to negligence, such as selecting an incompatible cooler.
Prepare graphics card
Put the hardware on an antistatic mat. Begin dismantling the original cooler. Depending on the structure of the cooler, remove the screws at the back of the card and carefully unhook the fan connector first. If the original cooler uses thermal glue, extreme care should be taken as you can easily damage parts. Pick up all the items carefully. Next, clean the hardware of thermal paste or pad residues with a solvent (e.g. isopropanol alcohol).
Remove spacers
Place thermal pads on cooling block
Apply Thermal Grease
Install PCB
Place thermal pads on PCB backside
Mount PCI bracket and backplate
Connect ARGB lighting
Screw in screw plugs with the tool
Customer Support
Need help?
Alphacool International GmbH
Marienberger Str. 1
D-38122 Braunschweig
Germany
Support: +49 (0) 531 28874-0
Fax: +49 (0) 531 28874 – 22
E-Mail: info@alphacool.com
https://www.alphacool.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>