MEAN WELL HLG-240H-12 Constant Voltage Constant Current LED Driver Instructions

: June 13, 2024
: MEAN WELL

Table of Contents

MEAN WELL HLG-240H-12 Constant Voltage Constant Current LED Driver
Product Information
Product Usage Instructions
Features
Applications
GTIN CODE
Model Encoding
SPECIFICATION
Documents / Resources

MEAN WELL HLG-240H-12 Constant Voltage Constant Current LED Driver

MEAN-WELL-HLG-240H-12-Constant-Voltage-Constant-Current-LED-Driver-
PRODUCT

Product Information

Product Name: HLG-240H 240W Constant Voltage + Constant Current LED Driver series
Model Numbers: HLG-240H-12, HLG-240H-15, HLG-240H-20, HLG-240H-24, HLG-240H-30, HLG-240H-36, HLG-240H-42, HLG-240H-48, HLG-240H-54
Output: DC Voltage
Rated Power: 192W (HLG-240H-12), 225W (HLG-240H-15), 240W (HLG-240H-20, HLG-240H-24, HLG-240H-30), 241.2W (HLG-240H-36), 240.24W (HLG-240H-42), 240W (HLG-240H-48), 240.3W (HLG-240H-54)
Ripple & Noise: Maximum 150mVp-p (HLG-240H-12, HLG-240H-15, HLG-240H-20, HLG-240H-24), 200mVp-p (HLG-240H-30)
Input Voltage Range: 90 ~ 305VAC
Frequency Range: 47 ~ 63Hz
Power Factor: >0.98/115VAC, >0.95/230VAC
Total Harmonic Distortion: <20%
Efficiency: >90%
AC Current: 4A / 115VAC, 2A / 230VAC, 1.2A / 277VAC
Inrush Current: Cold Start 75A (measured at 50% Ipeak)
Max. No. of PSUs on Circuit Breaker: 2 units (circuit breaker of type B) / 4 units (circuit breaker of type C) at 230VAC

Product Usage Instructions

Ensure that the input voltage is within the range of 90 ~ 305VAC and the frequency is within 47 ~ 63Hz.
Connect the LED driver to the LED lighting system using the appropriate wiring connections.
For models with adjustable voltage and current (A/AB/C-Type), use the built-in potentiometer to adjust the voltage and current within the specified ranges.
Ensure that the total load on the circuit breaker does not exceed the maximum number of PSUs specified for your type of circuit breaker.
Monitor the ripple and noise levels to ensure they are within the specified limits for optimal performance.
Check the power factor and total harmonic distortion to ensure compliance with electrical standards.
Monitor the efficiency of the LED driver to ensure energy efficiency.

Features

Constant Voltage + Constant Current mode output
Metal housing with class I design
IP67 / IP65 rating for indoor or outdoor installations
Function options: output adjustable via potentiometer; 3 in 1 dimming
Typical lifetime > 62000 hours
7 years warranty

Applications

LED street lighting
LED high-bay lighting
Parking space lighting
LED fishing lamp
LED greenhouse lighting
Type “HL” for use in Class I, Division 2 hazardous (Classified) location.

GTIN CODE

MW Search: https://www.meanwell.com/serviceGTIN.aspx.

Model Encoding

$MEAN-WELL-HLG-240H-12-Constant-Voltage-Constant-Current-LED-Driver-FIG- $2$$

Type	IP Level	Function	Note
Blank	IP67	Io and Vo fixed	In Stock
A	IP65	Io and Vo adjustable through built-in potentiometer	In Stock
B	IP67	3 in 1 dimming function (1~10VDC, 10V PWM signal and resistance)	In

Stock
AB| IP65| Io and Vo adjustable through built-in potentiometer &
3 in 1 dimming function (1~10Vdc, 10V PWM signal and resistance)| In Stock
C|

——-

| Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal potentiometer.| By request
D| IP67| Timer dimming function, contact MEAN WELL for details(safety pending).| By requestIn Stock

SPECIFICATION

$MEAN-WELL-HLG-240H-12-Constant-Voltage-Constant-Current-LED-Driver-FIG- $3$$ $MEAN-WELL-HLG- 240H-12-Constant-Voltage-Constant-Current-LED-Driver-FIG- $4$$

All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25°C of ambient temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
Tolerance: includes set up tolerance, line regulation and load regulation.
Please refer to “DRIVING METHODS OF LED MODULE”.
De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
The driver is considered as a component that will be operated in combination with final equipment. Since MC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify MC Directive on the complete installation again.
To fulfill requirements of the latest Er regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains.
This series meets the typical life expectancy of >62,000 hours of operation when case, particularly t point (or TMP, per DLC), is about 75°C or less.
Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com.
The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft)
For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf.

Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx.

File Name: HLG-240H-SPEC 2022-02-18

User’s Manual

Documents / Resources

| MEAN WELL HLG-240H-12 Constant Voltage Constant Current LED Driver [pdf] Instructions
HLG-240H-12 Constant Voltage Constant Current LED Driver, HLG-240H-12, Constant Voltage Constant Current LED Driver, Voltage Constant Current LED Driver, Constant Current LED Driver, Current LED Driver, LED Driver
---|---