Lumineux 430378 Avon PRO 4CCT Fire Rated Downlight Instruction Manual

: June 3, 2024
: Lumineux

Table of Contents

Lumineux 430378 Avon PRO 4CCT Fire Rated Downlight
INSTALLATION INSTRUCTIONS
- Electrical wiring connections
BOX CONTENTS
TOOLS REQUIRED
DISPOSAL
WARRANTY
AVON DOWNLIGHT DIMENSIONS
Dimming
PRODUCT TEMP SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Lumineux 430378 Avon PRO 4CCT Fire Rated Downlight

INSTALLATION INSTRUCTIONS

Electrical wiring connections

Lumineux-430378-Avon-PRO-4CCT-Fire-Rated-
FIG-1

Lumineux-430378-Avon-PRO-4CCT-Fire-Rated-FIG-1

PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION.

WARNING: Risk of electric shock! Isolate the mains power before proceeding.

Turn off the mains power before performing inspections, installation, or removal
Verify that the supply voltage is correct by comparing it with the luminaire label information It is the installers responsibility to ensure installation is suitable for the total load of the luminaire(s).
The supply cable, fuses/circuit brakers must be correctly rated for the electrical load and considering for any transient inrush currents that may occur
Do not perform insulation strength or resistance tests on installed luminarie(s) connected

Isolate the circuit.
Drill 70mm hole cut out.
Strip cable sleeves to reveal 15mm wire. Push wires into connector and push clamps downwards to secure the wires.
Attach connector to other half on light fi tting. Twist bezel to select CCT option by moving switch across to desired setting.
Grip spring clamps and move vertically.
Insert downlight into pre-drilled hole and clamps will spring back and secure light fi tting. Repeat for any other downlights, then connect power on.

READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLATION KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
IMPORTANT: This product must be installed by a qualiﬁ ed electrician or competent person, and in accordance with current building and IET wiring regulations.

BOX CONTENTS

This lighting fi xture has been properly packed to avoid damage during transit. Before commencing with the installation carefully inspect the luminaire to confi rm there is no damage. DO NOT INSTALL if any damage has occurred to the fi xture or any of its components:

Light Fitting
Instruction Manual
Quick Connector

TOOLS REQUIRED

Hole Saw drill 70mm
Cable

Manby Business Park, Manby, Lincolnshire, LN11 8UT Lumineux is a B&T Associates Ltd company.

DISPOSAL

The light source of this unit is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
Disassemble instructions for end of life disposal available on website.
Disposal of Electronic Equipment WEEE Directive 2002/96/EC This product falls within the scope of the Waste Electrical & Electronic Equipment Directive (WEEE), which means the product should not be disposed of as normal household waste. Please recycle where facilities exist or check with your Local Authority. RoHS – All components and materials used in this product are RoHS 2002/95/EC compliant.
Specifications may change from time to time. The information contained in this leaflet is for guidance only and should not be considered as always accurate and should be treated as not representative.

WARRANTY

This luminaire is warranted for a period of 5 years from the date of purchase. The warranty could be invalidated should the light fitting not be installed according to these instructions, outside the scope of the specification or the product has been altered or tampered with in any way. Please see website for terms and conditions.