darklab PowerBolts II USB-C Battery User Manual
- October 27, 2023
- darklab
Table of Contents
darklab PowerBolts II USB-C Battery User Manual
SAFETY NOTICE
CLASS III SYMBOL
A Class III appliance is designed to be supplied from a separate/safety extra-
low voltage (SELV) power source. The voltage from a SELV supply is low enough
that, under normal conditions, a person can safely come into contact, without
the risk of electrical shock. The extra safety features built into Class I and
Class II appliances are, therefore, not required. For medical devices,
compliance with Class III is not considered sufficient protection, and
further, more-stringent regulations apply to such equipment.
TECHNICAL DATA
BARRIER PROTECTING YOUR MACHINE
We strongly suggest the use of barrier products to protect your machine. For a
visual demonstration of barrier protection methods, please visit our FK Irons
YouTube channel.
This device is only for use by trained tattoo artists and not for use by children or persons of reduced physical, sensory or mental capabilities.
POWERBOLT II INTRO
THE POWERBOLT II
Now with easy-to-read, digital display and Bluetooth connectivity.
OVERVIEW
SPECIFICATIONS
- Output Voltage: 4-12V
- Increment/decrement voltage interval: 0.5 or 0.1V*
- Maximum output current: 1A
- Charger Input: USB-C
- Size: H72mm x W30mm x L27mm
- Weight: 30g (1oz)
- Battery Life: ~ 6-10 Hours (based on operating parameters)
FEATURES
Battery Charge: 4 bars = 100%, 3 bars = 75%, 2 bars = 50% and 1 bar = 25%. Single bar will blink to indicate when there is approximately 5 minutes left of operation. Note: Screen will switch to sleep mode after 15 seconds when machine not in use. Press the power button to wake. Charging: When USB-C is plugged in, screen mode will show battery charging. For best results, use provided charging cable.
Modes Menu: Hold the power button (center button) for 3 seconds to display built-in menu. Keep holding power button to cycle through menus. Release to stay on a chosen screen.
DETACHING THE POWERBOLT II
DETACHING THE POWERBOLT II
The PowerBolt II is compatible with the Flux Max, Flux, FluxS and the EXO. To detach your PowerBolt II, ensure you have a firm grip on the body of the Flux or EXO and Grip. Turn the
PowerBolt II counter-clockwise and pull out. To attach the PowerBolt II, push in while twisting clockwise. Ensure lock mechanism moves freely. PowerBolt II must sit correctly to ensure power electric leads align correctly. Avoid contact with the PowerBolt II leads while recharging or servicing. Turn power off before removing battery from machine.
CONNECTING YOUR BATTERY
HOW TO CHARGE YOUR MACHINE
Insert the provided USB-C cable The USB-C connection is into the back of the PowerBolt intended only for charging your and connect to a Hover or PowerBolt. PowerBolt can be power socket. Make sure the recharged while not attached cable is properly seated and is to the Flux. If connecting to a fully inserted into PowerBolt. Hover, the charge speed will be The PowerBolt is not designed up to 1.0 A. to operate while plugged in.
ADDITIONAL INFORMATION
VOLTAGE PARAMETERS
While voltage is a parameter that will vary from artist to artist, the
PowerBolt II has been tested to operate at a minimum voltage of 4 Volts to a
maximum voltage of 12 Volts. Depending on the type of needle configuration, or
brand you use, feel free to adjust the voltage to obtain the desired
performance.
WARRANTY
Darklab warrants that the device will perform efficiently when used as
intended. Should this product prove to be defective due to manufacturing
issues, Darklab will repair/replace the device free of charge. This warranty
will be void if the device shows signs of having been tampered, disassembled,
handled roughly, dropped, overexposed to moisture or damage resulting in
compromised functionality.
HANDY TIPS
The following tips will help you get the most out of your PowerBolt II and
avoid potential issues:
- Do not exceed the suggested voltage
- Use only FDA-approved cold sterilization solutions for disinfection
- NOT AUTOCLAVABLE
TROUBLESHOOTING
- Machine Manufacturer FK Irons: 1771 NW 79th Avenue, Doral, Florida 33126
- Servicing Your Machine As for any mechanical device, FK Irons strongly suggests that you service your device once a year to ensure all working parts are working as expected. This ensures the optimal condition of all working parts, including internal machine clean up and fresh lubrication. Routine servicing will ensure that your machine remains functioning as intended. Service is subject to fees.
- Warning Disconnect machine from any power source before making any adjustments.
For service inquiries, please contact service@FKirons.com. For additional tips and tutorials, please visit Youtube.com/FKirons
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>