immax NEO LITE Smart LED Strip User Manual
- June 13, 2024
- immax
Table of Contents
Smart home devices
USER MANUAL
Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU |
www.immaxneo.cz |
www.immaxneo.com
Made in P.R.C.
Immax NEO LITE Smart LED strip 10m, RGB+CCT,
color+dimmable, WiFi, remote control, MUSIC
TECHNICAL SPECIFICATIONS
Protocol: Wi-Fi
Frequency: 2400MHz~2483.5MHz
Maximum RF output power: 20dBm
INSTALLATION
- Use the power adapter with DC12V of output voltage only.
- Install the controller correctly, use 3M tape to fix it.
- Please unfold the LED strip to avoid the overheat issues. Please connect the cables of LED strip with the right position on the controller. Test the APP to check if it can control the LED strip correctly. If everything goes well, go to next step.
- Check and ensure the power supply, controller and LED strip are connected correctly
ATTENTIONS
- Do not put any metal around the controller, which could blocked WiFi signal.
- Ensure the power supply and controller are connected correctly.
- The power supply output voltage should be same as LED strip working voltage.
- Do not cover anything on the surface of power supply, controller and LED strip.
- Ensure the connection is correct before powering.
PRODUCT FUNCTIONS DIAGRAM
1:DC 12V input connection port.
2:Output connection port to connect to LED strip.
3:Function button: Turn ON / Turn OFF(two short click)
MODES CHANGE
Long press the button for over 5 seconds to reset or network pairing
DOWNLOAD AND REGISTRATION
Scan the QC Code to download ” Smart Life” APP. Or Search”Smart Life”in App store or Google Play to install the APP. Open the ” Smart Life” APP, tap “Register” to get an account with your phone number or E-mail. Sign in the APP.
APP CONNECTION
Preparation jobs: Power on the LED strip and enter the home of APP, please make sure your mobile and the smart kits are connected to the same WIFI.
Solution 1)
After powering on the strip, turn on and off 3 times(or long press the switch
button for over 5 seconds), the strip will go into a status of quick flashing.
Find the “+”(in the corresponding room of the APP) to add devices. If your
mobile have already turned on bluetooth before connecting the LED strip, then
no need to turn on bluetooth again, the APP will connect to the LED strip
automatically. If your mobile didn’t turn on bluetooh before connecting the
LED strip, the APP will pop up an interface with tips to ask you to turn on
bluetooth. Then please choose “Allow”, then the bluetooth function of your
mobile will be turned on. After that, the APP will pop up tips with info of
the LED strips, then choose “Go to add”. Will go into an interface of
bluetooth device, choose the “+” and go into next interface(Enter Wi-Fi
password). Input the password of the WIFI and choose “Confirm”, then it will
go into status of “Connecting……”, you will need to await for your mobile to
pairing with the controller at this step. Choose “Done” when it shows “Added
successfully”, then go into operation modes. (If solution 1 is not suitable
with your devices, please refer to solution 2)
Solution 2)
After powering on the strip, turn on and off 3 times(or long press the switch
button for over 5 seconds), the strip will go into a status of quick flashing.
Find the “+”(in the corresponding room of the APP) into interface of “Add
manually”. Then choose “lighting” to choose the correct smart devices and go
into interface of “Select 2.4 GHz Wi-Fi Network and enter password”.
Enter the Wi-Fi password, then choose “Next” and waiting until pairing success(make sure your mobile and the smart devices are in the same Wi-Fi networks). Then go into the interface of “Scanning devices”, after scanning success and choose “Next”, it will pop up interface of “add successfully” and choose “Done” to go into the operation modes.
INTERFACE INTRODUCTION
1.You can adjust the brightness and CCT under white light mode.
2.Under color light mode, you could change to any RGB mixed color and adjust
the brightness and saturability.
3. Scene:
- Recommended scene: various modes available for options, you can choose your preferable modes freely.
- Customized scenes: choose “+” into the interface of customized scene (Create scene), operation according to the tips.
4.Music modes
- The interface of music mode include local mode and APP mode for options. It
means the lighting modes could synchronize change with the rhythm of music or
voice that the smart devices received, light and sound synchronization without
delay, and scenes with different color changing rhythms.
Local modes: could receive the voice via the smart controller, it could receive the surrounding voices to control the light color synchronize changing.
APP modes: receive the voices via your mobile’s microphone to control the light color synchronize changing. - You could adjust the sensitivity and rhythm scene under the local mode.
Sensitivity adjustment: move the slide button to adjust your preferable
sensitivity. Rhythm scene: you can choose the recommended scene or customized
your own scene.
Customized scene: find the “rhythm scene” and choose “+” to create new rhythm scene to customize your preferable modes. The light synchronize change with the selected rhythm scenes.
Set your schedule (such as schedule a asleep time, the light will gradual fading till turn off at a scheduled time) (auto-wake-up the light will gradual bright.,) Timer: Turn on and off the light automatically at a set time Left time: The lights will automatically turn off after the countdown.
Power on behavior: do not disturb mode. suitable for frequent power failure area, do not disturb when the power is on, To turn off the light through the APP, the power needs to be turned on twice in a row before the light will turn on Initial mode, initial default color and brightness. Customize, select colors and brightness.
WIFI MUSIC+IR REMOTE CONTROLLER MANUAL
When using, first remove the tail PVC sheet, When the controller is under the pairing process, the remote controller can’t work.
Features
| Operation| Buttons
---|---|---
ON/OFF | Short press |
Static brightness adjustment
| Short press |
Long press
Static color
| Short press |
White (RGB mixed) | Short press |
Static modes Timed shutdown
| Short press |
Music modes| Short press |
SAFETY INFORMATION
CAUTION: Keep out of reach of children. This product contains small parts,
which may cause suffocation or injury if swallowed.
WARNING: Every battery has the potential to leak harmful chemicals that can
damage skin, clothing or area where the battery is stored. To avoid the risk
of injury, do not allow any substance from the battery to come into contact
with the eyes or skin. Every battery may burst or even explode if exposed to
fire or other forms of excessive heat. Take care when handling the batteries.
To reduce the risk of injury from mishandling the batteries, take the
following precautions:
– Do not use different brands and types of batteries in the same device
– When replacing the batteries, always replace all the batteries in the device
– Do not use rechargeable or reusable batteries.
– Do not allow children to insert batteries without supervision.
– Follow the battery manufacturer’s instructions for proper battery handling
and disposal.
CAUTION: The product and batteries should be disposed of at a recycling
centre. Do not dispose of them with normal household waste.
CAUTION: To ensure safe use of the product, wires must be brought at the
installation site according to valid regulations. The installation must only
be carried out by an individual with the appropriate certification in the
field of electronics. During installation or when a fault is detected, the
power cable must always be disconnected from the socket (in the case of direct
connection, the relevant circuit breaker must be switched off). Improper
installation can damage the product and cause injury.
CAUTION: Do not disassemble the product, electric shock may occur.
CAUTION: Use only the original power adapter provided with the product. Do not
operate the device if the power cord shows signs of damage.
CAUTION: Follow the instructions in the enclosed manual.
MAINTENANCE
Protect the device from contamination and soiling. Wipe the device with a soft
cloth, do not use rough or coarse materials.
DO NOT USE solvents or other aggressive cleaners or chemicals.
A Declaration of Conformity has been issued for this product. More information can be found at www.immax.cz
References
- Velkoobchod s LED technikou IMMAX | Immax.cz
- Velkoobchod s LED technikou IMMAX | Immax.cz
- Velkoobchod s LED technikou IMMAX | Immax.cz