BELLEVUE VXCFA95275 Ceiling Fan User Manual

BELLEVUE VXCFA95275 Ceiling Fan

CEILING FAN LIMITED LIFETIME WARRANTY

• The limited lifetime warranty covers this fan, for residential use by the original purchaser, against defects in material or workmanship as follows:

• If your fan motor fails at any time during the lifetime of the original purchaser due to defects in material or workmanship, we will provide a replacement part free of charge.

• If your fan motor fails at any time within one year after the original date of sale to the original purchaser due to defects in material or workmanship, we will provide labor to repair the defect, with the exception of take down/reinstallation,
  free of charge. The original purchaser will be responsible for all labor costs after this one year period.

• If no replacement parts are provided for any part of your fan motor that fails at any time during your lifetime due to defects in material or workmanship, we will refund the original purchase price of your fan.

• If your fan blades, or any accessory, except glass globes and light bulbs, fails at any time within one year after the original date of purchase due to a defect in material and workmanship, we will repair or, if we choose, replace the defective blades, switch, or accessory free of charge, with the exception of take down/reinstallation services.

• If the original purchaser ceases to own the fan, this warranty and any implied warranty, including but not limited to any implied warranty of merchantability or fitness for a particular purpose, become void. This warranty and any implied warranty, including but not limited to any implied warranty of merchantability or fitness for a particular purpose, do not cover glass globes, light bulbs, or finish on any metal portions of the fan.

• This warranty is in lieu of express warranties. The duration of any implied warranty of merchantability or fitness for a particular purpose, with respect to any fan motor, blades, switch, or accessories, is expressly limited to the period of the express warranty set forth above for such motor, blades, switch, or accessories.

• This warranty excludes defects, malfunctions, or failures of any fan that are caused by repairs by persons not authorized by us, use of parts or accessories not authorized by us, mishandling, improper installation, modifications or damage to the fan while in your possession, or unreasonable use, including failure to provide necessary maintenance.

• Some states do not allow the exclusion or limitation of consequential or incidental damages, in which case the above limitation or exclusion may not apply.

• This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Package Contents

Unpack your fan and check the contents.You should have the following items.

1. Hanger Bracket
2. Canopy
3. Decorative Cap
4. Downrod Stand Cover
5. Downrod Set (Included Hanger Ball, 6″ Downrod, Hanger Pin & Lock Pin)
6. Fan Motor Assembly
7. Fan Blades (3 PCS)
8. Connect Plate of Light Kit
9. Light Kit with LED Module
10. Glass Shade
11. Assembly Kit
12. Remote Control Set (Includes Receiver & Transmitter & Wire Connectors & Battery & Screws & Remote Control Instructions)
13. Blade Balancing Kit
14. Installation Instructions

Dimension Reference (Installed with 6″ Downrod)

• A. 14″
• B. 9-1/4″
• C.52″
• D. 5-1/8″

Exploded View Detail

Dual Mount Drawing

Safety Instructions

READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN TO INSTALL THE FAN AND SAVE INSTRUCTIONS.

• All set screws of the fan must be checked and retightened where necessary before installation.
• To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets, balancing the blades or cleaning the fan. Do not insert foreign objects between rotating fan blades.
• The fan blades must be turned on and spinning. Then press reverse button on remote control to change the fan direction.
• The safeguards provided by these safety instructions and by the separate installation instructions are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and care are factors which can not be built into this product. These factors must be supplied by the person(s) installing, caring for and operating the fan.

WARNING

• TO AVOID RISK OF ELECTRIC SHOCK, BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. TURNING OFF THE ELECTRICAL POWER BY USING THE LIGHT SWITCH IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK.

• TO REDUCE THE RISK OF INJURY, INSTALL THE FAN SO THAT THE BLADES ARE AT LEAST 7 FEET (2.1 METERS) ABOVE THE FLOOR AND AT LEAST 18 INCHES
  (0.5 METERS) FROM THE TIP OF THE BLADES TO THE WALL.

• TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT TO OUTLET BOX MARKED “ACCEPTABLE FOR FAN SUPPORT” AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX.

• THE INSTALLATION HAS TO BE IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE, ANSI/NFPA 70-1999 AND LOCAL CODES. IF YOU ARE UNFAMILIAR WITH THE METHODS OF INSTALLING ELECTRICAL WIRING, SEEK THE SERVICES OF A QUALIFIED LICENSED ELECTRICIAN.

INSTALLATION INSTRUCTIONS

IMPORTANT:

• BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION IN THE SAFETY INSTRUCTIONS AND INSTALLATION INSTRUCTIONS. IF IN DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
• SAVE ALL INSTRUCTIONS.
  NOTE: The fan weight is 15.43 lbs (7 kg). Be sure the outlet box you are using is securely attached to the building structure and can support the full weight of the fan. Failing to do so can result in serious injury.

Installation Step

• Turn OFF the electric circuit at the main fuse or circuit breaker box.

• Tighten the hanger bracket to the outlet box with two mounting screws.(Make sure the outlet box is securely installed so that it will be able to support at least the fan weight.) Attach the safety cable hook to the ceiling with the dry wall screw and washer, and make sure the safety cable hook is covered by the fan canopy. WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED “ACCEPTABLE FOR FAN SUPPORT”!

• Align and engage the bottom holes from blade to the bottom fan motor then fix them together with the pre-installed motor screws provided. In order to adjust the blade, the motor screws can’t be tightened. Carefully align the top holes from blade to the upper fan motor and then secure with the pre-installed motor screws provided and tighten the motor screws on the bottom of the fan motor. Follow the same process for the remaining two blades.

• Remove the lock pin and take off the hanger pin.

• Thread the motor wires through the downrod stand cover, decorative cap (Making sure the smooth side of decorative cap is facing downward.), canopy and downrod.

• Loosen the collar screws out part way. Insert the downrod into the collar. Slide hanger pin through holes of collar and downrod.

• Tighten the two collar screws. Slide lock pin into hanger pin until it is locked into position.

• Hang the fan on hanger bracket, and make sure the slot of hanger ball is snapped into the chip of hanger bracket exactly.
  Note: For slope ceiling installation, make sure the slot of hanger ball and the chip of hanger bracket face down.

• Move ground wires (a), outlet box wires (b), and motor wires (c) away from the center of the hanger bracket as shown. Thread the antenna through the hanger bracket first, then thread the receiver through the hanger bracket until it is placed center. Finally, cut motor wires (c) to length needed for connections.
  

• Hang the safety cable into the safety cable hook. (See Fig.12)

• Slide the canopy up to ceiling and over the two canopy screws on hanger bracket. Rotate canopy clockwise, next, while holding the canopy with one hand, slide the decorative cap over the screws and rotate clockwise until tight. Note: Adjust the canopy screws as necessary until the canopy and canopy cover are snug.

• Remove one screw and loosen another two screws from the bottom of the housing first, next thread the capacitor through the hole of connect plate of light kit, then push the connect plate of light kit upwards until the housing screws insert into the key hole slots of connect plate of light kit then rotate the connect plate of light kit until it’s fixed on the housing. Secure the connect plate of light kit to housing with previous screw which was removed and tighten the other two housing screws. Finally, remove the white paper on capacitor and then stick the capacitor on the connect plate of light kit.

• Remove three screws from connect plate of light kit first. Then connect the white (neutral) wire from the fan light to white (neutral) wire from connect plate of fan light with a wire connector; connect the black (hot) wire from fan light to blue (hot) wire from connect plate of light kit with a wire connector. Carefully put the wires into the connect plate of light kit, and then secure the light kit into connect plate of light kit with previous three connect plate of light kit screws.

• Attach the glass shade to the light kit by aligning studs and slots, and then turn it clockwise until it is locked in place.

• Turn ON the electric circuit at the main fuse or circuit breaker box.

• Install the battery (9V, included) into the transmitter.

Operating transmitter

• Press “HI” button to turn on the fan at high speed.

• Press “MED” button to turn the fan in medium speed.

• Press “LOW” button to turn the fan in low speed.

• Press “FAN OFF” button to turn off the fan.

• Press “REVERSE” button to set direction of fan rotation.
  The fan speed will slow down until the fan is turned off and it will restart by spinning in the reverse direction and resume the previously selected speed setting.

• Press “LIGHT ON /OFF” button to turn on or turn off the light.

• Press and hold the “DIMMER” button to dim or brighten lights to the desired level and release, and the brightness level will be memorized.Turn on the light again, then fan light will restore to the brightness level which was dimmed last time.

•  Press “DIMMER” button to change color temperature of fan light, there are a total of 5 levels of color changing from 2700K,3000K,3500K,4000K to 5000K.

Note:

1. This remote controller has a memory function setting. The fan will operate at the same speed and the fan light will stay at the same brightness as the last time the power supply was turned off.
2. Compatible wall switch model NO.:LUTRON / SKYLAPR / SFSQ-LFH-WH.
   • This wall switch only can turn on or turn off the light, no dimming function.
   • This LED module has memory function setting. The fan light will stay at the same brightness and temperature as the last time of remote control setting.
   • Before remove the receiver of remote control,please setting your favorite brightness and temperature. Install Without Remote Controller Fig.21.
   • The direction of fan rotation can’t be set without remote controller.
   • The fan speed will be stay at high speed after remove the remote controller.
     Please use wall control to adjust the speed which you need.

Set the code:
Within the 10 seconds time frame after the main power is turned on, press and hold FAN OFF button more than 3 seconds. The LED indicator of transmitter will begin to flash. Once set code successful, the fan turned off and the light turned on.
Note: Included transmitter matched with receiver was the factory default Settings, no need to set the code again. Go through these setup steps if you found your transmitter can’t match with receiver.
Install the transmitter wall bracket on the wall with two screws and place transmitter in it carefully.

Install Without Remote Controller

Note:

1. Remote controller can not be used along with a solid-state speed control at the same time.
2. The direction of fan rotation can’t be set without remote controller.

• Turn OFF the electric circuit at the main fuse or circuit breaker box. (See Fig.19)
• Unscrew the canopy. Remove the wire connectors from the fan to ceiling wire connection. The receiver should be removed from the hanger bracket. (See Fig.21)
• Turn ON the electric circuit at the main fuse or circuit breaker box.

Troubleshooting Guide

If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Troubleshooting Guide.

• If fan does not start:

1. Check main and branch circuit fuses or circuit breakers.
2. Check line wire connections to fan and switch wire connections in switch housing.  

CAUTION: Make sure main power is turned off.

3. Make sure forward/reverse switch is firmly in bottom or top position. Fan will not operate when switch is in the middle.
4. Make sure that the wall control is turned “ON”.

• If fan sounds noisy

1. Make sure all screws in motor housing are snug. (not over tightened)
2. Make sure the screws which attach the fan blade bracket to the motor are tight.
3. Make sure wire connectors in switch housing are not rattling against each other or against the interior wall of the switch housing.  

CAUTION: Make sure main power is turned off before accessing switch housing.

4. If using an optional ceiling fan light kit, check to be sure the screws securing the glassware are finger tight. Check to be sure light bulb is tight in socket and not touching glass shade(s). If vibration persists from glass, remove glass and install a 1/4 in. wide rubber band on glass neck to act as an insulator. Replace glass and tighten screws against rubber band.
5. Some fan motors are sensitive to signals from Solid State variable speed controls. DO NOT USE a Solid State variable speed control.
6. Allow “break-in” period of 24 hours. Most noises associated with a new fan will disappear after this period.

• If fan wobbles:
  All blades are weighed and grouped by weight. Natural woods vary in density which could cause the fan to wobble even though all blades are weight-matched. T he following procedures should eliminate most of the wobble. Check for wobble after each step.

1. Check that all blades are screwed firmly into blade beackets.
2. Check that all blade brackets are tightened securely to motor.
3. Make sure that canopy and mounting bracket are tightened securely to ceiling junction box and junction box is mounted firmly to ceiling joist.
4. Most fan wobble problems are caused when blades are not equally level. To check the blade levels, select a point on the ceiling above the tip of any blade. Measure the distance from the ceiling to the blade tip, to an accuracy of 1/8 inch. Rotate the blades until the next blade is in the measuring position. Repeat measurement for each blade. If all blade levels are not equal, you can adjust blade levels by the following procedure. To adjust a blade tip down, insert a washer (not supplied) between the blade and blade bracket at the screw closest to the motor. To adjust a blade tip up, insert washer (not supplied) between the blade and blade bracket at the two screws farthest from the motor.
5. If blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute the weight and possibly result in smoother operation.

• If light does not work:

1. Check blue wire from fan to make sure it is connected to hot wire from house.
2. Check for loose or disconnected wires in fan switch housing.
3. Check for loose or disconnected wires in light kit.
4. Check for faulty light bulbs.  

CAUTION: Make sure main power is turned off before accessing switch housing.

DYNAMIC BLADE BALANCING KIT

PREFACE
Your ceiling fan may sometimes have wobbling problems when operating due to irregularity in the blades or the blade brackets. Improper assembly in the mounting system may cause some additional problems. This balancing kit can be used to fix wobbling problems.

DYNAMIC BLADE BALANCING KIT FOR CEILING FANS

1. Make sure that all blades are firmly screwed into the blade brackets.
2. Make sure that all blade brackets are firmly secured to the motor housing.
3. By looking up at the fan from below, check and be certain that none of the blade brackets are bent and that none of the blades are out of position.
4. Use a yardstick to check the blade tracking. Put the yardstick up against the ceiling vertically and against the outside leading edge of a blade. Note the distance of the edge of blade to the ceiling. Carefully turn the blades slowly by hand to check the remaining blades. All distances should be the same

Operate the fan ten minutes. After following all the steps and if the wobbling problem is not solved, a dynamic balancing needs to be done with balancing kit. Follow the procedure listed below:

• Turn the fan off. Select one blade and place the plastic clip on it, where the plastic clip locates is halfway between the blade bracket and the blade tip on the edge of the blade.
  Caution: The plastic clip should be placed on the windward edge of the blade for fear of clip flying off.

• Turn the fan on (set the speed that causes the wobble most). Observe if the wobble is better or worse. Turn the fan off and move the clip to the next blade. Do the same for all blades and note on which blade the clip reduces the wobble most. Place the clip on the blade which showed the most improvement. Move the clip inward and outward on this blade and operate the fan to find the position where the clip gives the most improvement.
  Caution: Stay clear of the blades. If the clip, for any reason, is not secure, injury could result .

• Once the exact position is determined, place a weight on the top of the blade, on its centerline and as close as possible to the clip. Peel the paper off of the back of the weight and press firmly to ensure that it is securely attached to the blade. Remove the clip.
  Caution: Clean the surface of fan blade before placing the balancing weight so that the balancing weight can be firmly attached on it.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>