profi-pumpe 801R-1 Solar Pond Pump Instruction Manual

SOLAR POND PUMP
SOLAR TEICHPUMPEN
Version 22.12
OPERATING INSTRUCTIONS

Technical changes, misprints and mistakes reserved! Newest information about our products can be found online.
Technische Änderungen, Druckfehler und Irrtümer vorbehalten! Aktuelle Informationen zu unseren Produkten finden Sie auf: http://www.profi-pumpe.de

SAFETY INSTRUCTION AND WARNINGS

Please read the user manual before using the pump
Warning sign

INTRODUCTION

We would like to congratulate you on the purchase of our pump. We appreciate your trust. That‘s why functional security and operational safety stands on first place for us.
To prevent damage to persons or property, you should read this user manual carefully. Please observe all safety precautions and instructions for proper use of the pump. Failure to follow the instructions and safety precautions can result in injury or property  amage. Please keep this manual with the instructions and safety instructions carefully in order to at any time you can restore them.

IN GENERAL

Solar Pond Pump Kits are high-quality fountain pump systems for energy use in outdoor or indoor use.
The perfect eye-catcher in your garden or seed tray. Through the use of high- quality solar technology with Li-Ion batteries are the Solar Pond Pump Kits mains-independent and anywhere to use immediately.
2.1 It‘s recommended NOT to conduct yourself technical modifications. First, it is not certain whether these changes are technically correct and, secondly, because no guarantee can be granted.
2.2 Transport damages are immediately to be reported to the package distributor and to us in written form. Failure to give timely notice to the shipping company, and are therefore rejected your claims from the transport company, so we can not accept these claims as well. In your legal obligation to cooperate to minimize damage, we point out expressly herewith.

STARTING

• Unpack all components carefully. You should have received the following parts:
  1pc pump with 5m cable / 1pc LED light ring with 5m cable / Battery box / 1pc Remote control (Included OASIS 501R-1, OASIS 801R-1, OASIS 1601R-1) / 1pc Solar panel with 2m cable (2x solar panel at Oasis 2002-1, Oasis 1601R-1) / 1pc Solar panel bracket / 1pc Extension tube / 1pc Ground spike / 1 set Fountain nozzles To protect the product, place all parts on a soft surface before assembly.

• Remove the protective film from the solar panel (if any).

• Position the solar panel so that it receives direct sunlight. The fountain can not work if the solar panel is shaded. Adjust the solar panel angle to maximise the amount of solar energy collected. Connect the solar panel / pump / LED light to the
  battery box (see item 5). Check whether the flow is fully open (or else promoted little or no water).

FROST

Frost can cause damage to the pump. In freezing the pump, pipes and water tank must be emptied, rinsed with clean water and stored dry.

ASSEMBLY INSTRUCTION

5.1 Join the bracket, tubes and ground spike together and then attach the solar panel to the bracket. Slide the bracket into the bracket slot in the backside of the solar panel.
The holding bracket holds the weight of the solar panel. The direction towards the sunlight can be adjusted with the wingnut.

5.2 Place the pump in the pond or reservoir. Make sure, there is enough water in the pond or reservoir. The pump need to be fully immersed in water. The pump can be placed under water or float on the water surface.
Your choise will depend on the water depth and type of reservoir used. If the water depth is shallow, we suggest the under water assembly. For deeper ponds or reservoirs you will need to use the floating assembly.

5. Fountain head adaptor

5.3 Deep water assembly (only OSLO 300 LIGHT-2)

If there is a rubber bung, lead the cables through it and place it on the tube in the corpus to avoid water leakage.
5.4 Your solar pump kit should look like this after assembly.An extra solar
panel for:
Oasis 1601R-1,
Oasis 2002-1

IMPORTANT!
Twist plugs slightly and pushing it into the sockets.
Make sure the sealing rings are fully in groove

OPERATION AND FUNCTION

6.1 Operation from battery box

• Continual use mode: Press button (power), indicator light (on) lit, pump will work continously until battery runs out of all power.
• Timer function mode: Press button (timer) lit, indicator light (2 hours) lit, pump will be on for 2 hours, off for 22 hours and will repeat this timing set every day at the same time. To select 3 hours or 4 hours, timer by pressing te button (timer) repeatedly until indicator light (3 hours) or (4 hours) lit. The pump will be on for 3 hours, off for 21 hours at 3 hours timer set, on for 4 hours, off for 20 hours at 4 hours timer set.
• Winter mode: Press button (winter), indicator light (pulse) lit, pump will be on for 20 seconds in every 60 seconds. We recommend to use this mode to extend battery life time in winter or in poor weather.
• Pump flow control: Press button (flow rate) repeatedly to adjust the pump flow rate (3 levels for selection).
• Low Battery: If you find the indicator light (low Bat.) blinking, that means battery power is low. The system will shut off the pump/LED light shortly to protect the battery. Now the (low Bat.) light will keep blinking, when battery power is low and the pump and LED light will not work until battery is recharged.

NOTE : Higher flow rate will cost more power and will reduce the battery life time.

6.2 Operation from remote control IMPORTANT!
You have to press the POWER button in battery box to switch on battery system first, then you can select function by pressing button on the remote control.

• (ON): The Pump will be constantly on until battery runs out of all power.
• (2): The pump will stay on for 2 hours an then switch off for 22 hours and will repeat this timing set every day at the same time. For example: if you want to turn on every day at 5pm, you need to turn on the pump to 2 hours timer at 5pm. Pump will turn on every day at 5pm and turns off at 7pm.
• (3): The pump will stay on for 3 hours an then switch off for 21 hours and will repeat this timing set every day at the same time. For example: if you want to turn on every day at 5pm, you need to turn on the pump to 3 hours timer at 5pm. Pump will turn on every day at 5pm and turns off at 8pm.
• (4): The pump will stay on for 4 hours an then switch off for 20 hours and will repeat this timing set every day at the same time. For example: if you want to turn on every day at 5pm, you need to turn on the pump to 3 hours timer at 5pm. Pump will turn on every day at 5pm and turns off at 9pm.

PERFORMANCE OF THE PUMP

The performance of the pump depends on the orientation of the solar panels towards the sun and their intensity. The max. Performance is achieved under optimum conditions. A function in the shade or under cloudy skies can not be guaranteed. The solar pond kits are designed primarily for use in the summer months. However, the solar panel power should be enough even on days in spring and autumn with excellent sunlight to operate. However, this can not be guaranteed. For models with battery operation the  unction of the solar pond sets the charge state of the battery depends.
Depending on the pump version allows you to customize the delivery. If a controller is available at the pump, as in the horizontal position is the max. achieved delivery. In a vertical position only little or no water is pumped.
This model sets the flow rate at the control panel of the battery case.

BATTERY INFORMATION

After 12 to 18 months, you should replace the battery. For this purpose unscrew the battery cover and replace the battery with a new (replacement batteries available on request). Please note the limited implied warranty of 6 months.
Tools needed:
Medium sized Philips head screwdriver.

1. Remove the srews from battery box
2. Remove the lid and control panel from the battery box slightly.
3. Disconnect the old battery from the control panel and remove it from the housing. Insert the new battery.
4. Carry out the assembly in reverse order. IMPORTANT! It must be ensured that the battery cover is properly tightened and watertight.
   With repeated charge and discharge cycles Lead-Acid and NiMh battery packs are less efficient (memory effect). This effect is much less pronounced, but still present in small mass in the Li-ion batteries used.
   Through very short and frequent loading operations and many other operational influences batteries can age prematurely strong.
   The batteries are therefore subject to a consumable and wearing part of a shortened warranty of 6 months.
   If you find that the battery will be less efficient, the battery needs to be fully charged. These allow the unit for 2 to 3 days (pump should not be connected) standing in the sun in order to allow a maximum charge the battery or use a suitable externalcharger. We recommend to occasionally repeat this procedure to extend the battery life.
   If after this recharging the battery still does not meet expectations, you should replace the batteries.
   NOTE : The battery is supplied charged. If the state of charge, contrary to expectations, not be sufficient to charge the batteries for at least 8 hours to allow sufficient charging of the battery (so damage the battery to avoid overcharging, the pump must be connected).

WARNINGS ON BATTERY

Lithium Ion cells and battery may get hot, explode or ignite and cause serious injury if they are exposed to abusive conditions, Be sure to follow the safety warnings listed below:

• Do not install the battery backwards, so the polarity is reversed

• Do not connect the positive or/and negative terminal or/and the battery to each other with any meta object, such as wire

• Do not disassemble or modify the battery. The battery contains safety and protection devices which may cause the
  battery to generate heat, explode or ignite if damaged

• Do not place the battery in or near fire, on stoves or other high temperature locations. Do not place the battery iiin direct sunlight or use/store the battery inside cars during hot weather. Doing so may cause the battery to generate heat, explode or ignite

• It is not advised for children to handle the battery

• When the battery is worn out, wrap the terminals with adhesive tape or similar materials before disposal

• Immediately discontinue use of the battery, if there is an unusuak smell, a change of color or shape, or if it appears
  abnormal in any other way

• Do not place the battery in microwave ovens, high pressure containers or on cookware facilities

• In the event of the battery is leaking and fluid gets into your eye, do not rub the eye, rinse well with water and immediately seek medical advice. If left untreated, the battery fluid could cause serious injury to the eye

SERVICING

If after some time the pump starts losing power or stops working, please clean up sediment in the pump shell or filter cribs. Kindly note the pump can be opened by pressing down at the bottom of the filter housing. To clear the impeller, open the pump housing at the front by sliding up the front plastic cover.

• Pull off filter cover as shown
• Remove filter and rinse in water
• Open impeller cover, then impeller can be easily removed
• Rinse all parts thoroughly in water
• The solar module should only be cleaned with soft tissue or propriety glass cleaning solution.

10.1. The following controls should be carried out regularly:

• Cleanness of the medium (no mud, see technical data)
• Moreover, the pump should be emptied with danger of frost, be washed out with clear water and stored dry.

11. SECURITY TIPS

• Obey absolutely valid regulations on the electrical security

• Never run pump dry

• Pumping inflammable, as well as all other aggressive liquids is prohibited

• Pay attention to the medium max. 40°C

• Any altering of the product itself or changing of the components is forbidden.

• With longer unused times, clean the pump, wash it out with clear water, dry and store it at room temperature

• Do not connect the pump to any AC voltage power directly, it’s ONLY for DC Voltage power.

• Operate the pump in freshwater or saltwater only (never above 50°C), especially keep it away from flammable liquids.

• All solar panels are very sensitive, protect it before all against external mechanical influences (shock, vibration, etc.)
  The manufacturer explains:

• To take over no responsibility in the case of accidents or damages on the basis of carelessness or disregard to the instructionsin this book.

• To reject every responsibility for the damages which originate from the improper use of the pump.

RECOGNISING AND REPAIRING OF MISTAKES

the sun
Low battery power| See point 6.1. (Battery information)
Connector from the pump is not connected correctly| See point 5.4
Defective pump / solar panel broken| Replace pump or solar panel. For fault isolation: solar panel Check if the specified voltage is provided. Operate the pump to an external battery.
Pump runs but no water is encouraged| Pump impeller and filter housing polluted| Disassemble and clean in accordance with point 8, the pump and the housing (by means of water and a soft brush)
The flow regulator on the pump is closed| Open the flow regulator on the pump.
Coarsining or fountain nozzles dirty| Disassemble and clean the tube and the fountain nozzle
| Pump has drawn in air (Avoid Caution! Dry running)| Stop the pump briefly and then back on. (Re-starting)
No proper water fountain| Fountains nozzles and tubes are dirty| Clean the fountain nozzles or tubes

GUARANTEE REGULATIONS

For all manufacturer defects and material defects we grant the legal guarantee time (new and unused product).
In such cases we take over the exchange or the repair of the pump. Forwarding expenses are not carried by us.
The guarantee is not valid with:

• Material wear (sealing rings, impeller wheels, impeller chambers)
• Unjustified interventions or changes in the pump
• Damages by selffault
• Improper servicing and improper use
• DRY RUN (Also partially!) of the pump

Moreover, we give no damage compensation for secondary damages!

NOTES ON PRODUCT LIABILITY
We point out, that we are only liable for damages under the Product Liability Act, which are caused by our units if no changes were made to the equipment. We are only liable for repairs, if original spare parts and accessories were used and repairs are carried out by our authorized service.

NOTES ON DISPOSAL

Electro devices of our company, labeled with the symbol of the crossed trash bin, are not permitted to be disposed in your household garbage. We are registered at the German registration department EAR under the WEEE-No. DE79535656. This symbol means, that you’re not allowed to treat this product as a regular household waste item – it has to be disposed at a recycling collection point of electrical devices.
This is the best way to save and protect our earth.

THANK YOU FOR YOUR SUPPORT!
In connection with the sale of batteries or with the delivery of equipment containing rechargeable battery packs, the seller is obliged to draw your attention to the following:
You are obliged to return used batteries as an end-user. You can return batteries after use to the seller or to the designated collection facilities, which are free of charge (eg: municipal collection points or in stores). You can return the batteries for disposal at no charge to the seller.

EU DECLARATION OF CONFORMITY
The undersigned, Amur S.à r.l., 36, Rue de la Gare, L-5540 Remich, certifies that the product named overleaf, namely Solar-Teichpumpe „OASIS“ as placed on the market, complies with the relevant provisions listed below, the relevant EU harmonised directives and the EU standard for safety. This declaration of conformity applies insofar as no modifications are made to the product. The sole responsibility for issuing this declaration of conformity lies with the manufacturer.
The sole authorised person to keep the technical documents: Amur S.à r.l. – 36, Rue de la Gare – L-5540 Remich
EC Electromagnetic compatibility directive (2014/30/EU)
The following harmonized standards: EN 55014-1:2017; EN 55014-2:2015; ROHS: 2011/65/EU; BS EN 550141:2017 / DIN BS EN 55014-1; BS EN 55014-2:2015 / DIN BS EN 55014-2
Signed for and on behalf of Amur S.à r.l. :

TECHNICAL DATA

| | OASIS 501R-1 (5 001 001 008)| OASIS 801R-1 (5 001 001 009)| OASIS 1601R-1 (5 001 001 010)
---|---|---|---|---
dtund| Max. pump capacity| 500 Ilh| 800 1/h| 1500 Ilh
Max pump height| 140 cm| 200 cm| 300 cm
Max fountain height| 110 cm| 110 cm| 160 cm
Max. water temperature| 40 °C| 40 °C| 40 °C
Solar module| Rated voltage| 18 V| 18 V| 18 V
Amperage| 0,277 A| 0.444 A| 0.444 A
Power| 5 W| 8 W| 2x 8 W
Dimension (LxWxH)| 250x190x18| 358x238x18| 2x 358x238x18
| Protection grade, Panel/Pump| IP44 I1P68| IP44 / IP68| IP44 / IP68
General| Battery Type| Lead acid 12V I 4Ah| Lead acid 12V I 4Ah| Lead acid 12V / 5Ah
Cable length| 5 m| 5 m| 5 m
Ambient temperature| 0°C – 45°C| 0°C – 45°C| 0°C – 45°C
| English| OASIS 2002-1
(5 001 001 011-1)| OSLO 300 LIGHT-2
(SP01122-2)|
thund| Max. pump capacity| 1500 1/h| 300 1/h|
Max pump height| 300 cm| 120 cm|
Max fountain height| 160 cm| 65 cm|
Max. water temperature| 40 °C| 40 °C|
Solar module| Rated voltage| 18 V| 9 V|
Amperage| 0,555 A| 0,333 A|
Power| 2x 10 W| 3 W|
Dimension (LxWxH)| 2x 350x285x18| 250x175x18|
General| Protection grade. Panel/Pump| IP44 I1P68| IP44 / IP68|
Battery Type| Lead acid 12V I 5Ah| Lead acid 6V I 4Ah|
Cable length| 5 m| 5 m|
Ambient temperature| 0°C – 45°C| 0°C – 45°C|

SPARE PARTS

The spare parts will be available for purchase from AMUR S.à.r.l. at www .profi-pumpe.de from March 2023.

Spare part, remark / Ersatzteil, Bemerkung a.| No.|
---|---|---
Pump 2 for _OASIS” 1601-1.2002-1| A136
SP03101|
Pump 2 for _OASIS” 501-801| A135
SP03101|
Solar panel for _OASIS• 501 R-1| A3373 SP02211|
Solar panel for _OASIS’ 801 R-1| A6778
SPZ03142|
Solar panel for .OASIS- 1601| A6781|
Solar panel for _OASIS’ 2002| A136
SP03101|
LED light ring 4-5×1-7.4V| A6721
SPZ03129|

For technical information see section 17.
 Please note our disposal advice at section 15.

Notes
Imprint

Amur S.à r.l.
www.amur.lu
Email:info@amur.lu
Tel.: (+49) 0611-9 45 87 77-0
Fax: (+49) 0611-9 45 87 77-11

Documents / Resources

| profi-pumpe 801R-1 Solar Pond Pump [pdf] Instruction Manual
801R-1 Solar Pond Pump, 801R-1, Solar Pond Pump, Pond Pump, Pump
---|---

References

• Amur
• Profi-Pumpe.de Ihr Online-Shop für Pumpen und Pumpenzubehör

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>