PEPE P40010 Commode Toilet Chair for Bedroom User Manual
- June 9, 2024
- Pepe
Table of Contents
PEPE P40010 Commode Toilet Chair for Bedroom
BEDSIDE COMMODE
- GRAY P40010
- P40012 BLACK
The PEPE BEDSIDE COMMODE is a portable toilet, designed to facilitate the need to go to the toilet for the elderly or people with reduced mobility. It includes a large seat, a bucket for bowel movements and adjustable height to adjust the chair to the user’s needs
TECHNICAL SPECIFICATIONS
COMPONENTS
- A. Frame.
- B. Foot tube.
- C. Foot.
- D. Backrest.
- E. Seat front tube.
- F. Bucket frame.
- G. Seat.
- H. Seat cover.
- I. Bucket
ASSEMBLY
- Open the frame (A).
- Assembly the backrest. Insert the backrest tube (D) into the frame (A) through the hole until you hear a click from the safety system.
- Assembly of the seat front tube. Insert the seat front tube (E) through the two tubes of the frame (A) until you hear a click corresponding to the safety system. The flap should be towards the inside of the chair.
- Assembly of the legs. Insert the foot tube (B) into the foot (C). Then fit the four legs into the central frame (A). Make sure that all the legs are adjusted to the same height. If the legs are assembled, just snap them into the frame and adjust the height
- Assembly of the bucket frame. Insert the flaps of the bucket frame (F) into the inner grooves of the central frame (A).
- Assembly of the bucket. Place the bucket (I) inside the bucket frame (F).
- Fitting the seat and lid. First place the seat (G) and then the toilet seat cover (H) on the back of the central frame (A), pressing the openings of the seat and the cover against the frame until they fit completely.
WARNINGS
- Check that the seat is securely fastened.
- Do not use the bedside commode while showering or bathing. Do not stand on this product.
- Make sure the floor is dry during use. Do not use the product on ramps or stairs.
- Make sure that all four legs are at the same height and that the spring-loaded buttons engage with all holes.
- Do not expose the bedside commode to the sun to prevent materials such as plastic from being damaged by exposure.
- The bedside commode is intended for domestic use.
- Do not exceed the maximum weight supported by the product, which is 300 lb.
- Any serious incident involving the product must be reported to the manufacturer and to the competent authority of the Member State in which the user and the patient are established.
CLEANING AND MAINTENANCE
Clean the product with soap and water. Use mild detergents, do not use abrasive products.
WARRANTY
KMINA warrants this device to be free from defects. The warranty shall remain valid for 3 years from the date of original purchase by the consumer. The warranty does not extend to parts exposed to natural wear and tear that require periodic replacement.
READ BEFORE RETURNING, SAVE THE PLANET.
- Returns generate more than 15 million tons of CO2 annually.
- If pieces are missing or have arrived damaged, before returning, contact us
IMPROVING MOBILITY DEVELOPMENT S.L.
Avda. Mare Nostrum 1, Bloque 1, Pta 16
46120, Alboraya, Valencia, Spain
admin@kmina.com
www.kmina.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>