MITSUBISHI HEAVY RCN-E2 Wireless Remote Control for Packaged Air Conditioner User Manual

: June 13, 2024
: Mitsubishi Heavy

MITSUBISHI HEAVY RCN-E2 Wireless Remote Control for Packaged Air

Conditioner

Product Information

This wireless remote control is designed for use with our packaged air conditioner. It complies with the following directives/regulations:

EU Directive – Machine 2006/42/EC, Laagspanning 2014/35/EU, EMC 2014/30/EU, RoHS 2011/65/EU, Ecodesign 2009/125/EC
GB Regulations – SMR S.I. 2008/1597, EER S.I. 2016/1101, EMC S.I. 2016/1091, RoHS S.I. 2012/3032, Ecodesign S.I. 2020/1528

CE and UKCA marking is applicable to the area of 50 Hz power supply.

Product Usage Instructions

Safety precautions:
- WARNING: Failure to follow these instructions may result in serious consequences such as death, severe injury, etc.
- CAUTION: Failure to follow these instructions may cause injury, property damage, or serious consequences depending on the situation.
- Never do: Always follow the instructions given.
- Absolutely keep water away: Do not expose the remote control to water or any liquid.
- Absolutely keep wet hands away: Do not operate the remote control with wet hands.
- Names and Functions of Remote Control Button Refer to the user manual for detailed information on the names and functions of each button on the remote control.
How to Operate
Refer to the user manual for detailed instructions on how to operate the wireless remote control.
Current Time Setting Procedure
Refer to the user manual for step-by-step instructions on how to set the current time on the remote control.
On-Timer Operation by Clock
Refer to the user manual for instructions on how to use the on-timer operation feature using the clock function.
Off-Timer Operation by Clock
Refer to the user manual for instructions on how to use the off-timer operation feature using the clock function.
Sleep Timer Operation
Refer to the user manual for instructions on how to use the sleep timer operation feature.
Program Timer Operation
Refer to the user manual for instructions on how to use the program timer operation feature.
Indoor Function Settings
(Available only with master wireless receiver) Refer to the user manual for instructions on how to access and configure indoor function settings using the master wireless receiver.
Backup Switch Operation
Refer to the user manual for instructions on how to operate the backup switch.
Check Indication
Refer to the user manual for information on the check indication feature and how to interpret the displayed information.
Filter Sign
Refer to the user manual for information on the filter sign feature and how to interpret the displayed sign.

BEFORE YOU USE

Safety precautions
Please read the precautions written here carefully to operate the unit properly. You are required to observe these fully because every item of these instructions is important for safety.

WARNING Failure to follow these instructions may result in serious consequences such as death, severe injury, etc.
CAUTION Failure to follow these instructions may cause injury, property damage or, serious consequences depending on.

The following pictograms are used in the text.

Never do.
Always follow the instructions given.
Absolutely keep water away.
Absolutely keep wet hands away.
- Keep this manual at a safe place where you can consult with whenever necessary. Show this manual to installers when moving or repairing the unit. When the ownership of the unit is transferred, this manual should be given to a new owner.
- Electrical wiring work must be implemented only by qualirfied specialists.

WARNING

Consult your dealer or a professional contractor to install the unit. Improper installation made on your own may cause electric shocks, Fire or dropping of the unit.
Consult your dealer when moving, disassembling or repairing the unit. Never modify the unit.
Improper handling may result in injury, electric shocks, Fire, etc. Avoid using combustible substances (hair spray, insecticide, etc) near the unit. Do not use benzene or paint thinner to clean t he unit. It could cause cracks, electric shocks or Fire. Stop operation under abnormal situation.
If continued, it could result in break-down, electric shocks, Fire, etc.
If any abnormal condition (burnt odor etc.) occurs, stop operation, turn off the power switch and consult your dealer.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a
safeway and understand the hazards involved.

CAUTION

Do not use or let use the unit or remote control as play equipment.
Improper operations could cause ill health or health disorder.
Never disassemble the remote control.
If you touch internal parts accidentally, you could get electric shocks or cause trouble.
Do not wash the remote control with water or liquid.
It could cause electric shocks, Fire or break-down.
Do not touch electric parts or operate buttons or screens with wet hands.
It could cause electric shocks, Fire or break-down.
Do not dispose the remote control by yourself.
It could destruct the environment. Ask your dealer when it
is necessary to dispose the remote control.

Note

The remote control should not be putted where it is
exposed to direct sunlight or the ambient temperatures
become higher than 40°C or lower than 0°C.
It could cause deformation, discoloration or break-down.
Do not use benzene, paint thinner, wipes etc. to clean the remote control.
It could discolor or break-down the remote control. Wipe it with a piece
of cloth which is squeezed tightly after wetting with diluted neutral
detergent. Finish up the cleaning by wiping with a piece of dry cloth.
Do not tap the remote control buttons or screen with pointed objects.
It could damage or cause break-down.

Precautions for waste disposal
Your Air Conditioning product may be marked with this symbol. It means that waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) should not be mixed with general household waste. Air conditioners should be treated at an authorized treatment facility for re-use, recycling and recovery and not be disposed of in the municipal waste stream. Please contact the installer or local authority for more information.

Specifications

Remote control specifications

Item	Description
Product dimensions	60 (W) x 167 (H) x 24 (D) mm (not including protruded

section)
Weight| 0.11 kg
Power supply| DC 3.0 V
Usage environment| Temperature: 0 to 40 °C
Material| Casing: ABS

CONTROL BUTTON

NAMES AND FUNCTIONS OF REMOTE CONTROL BUTTON

INDICATION BOARD AND BACKUP SWITCH

Ceiling suspended (FDE)
Ceiling cassette -4 way- (FDT)
Ceiling cassette -4 way Compact- (FDTC)
Ceiling cassette -1 way- (FDTS) $MITSUBISHI-HEAVY-RCN-E2-Wireless-Remote-Control-for-Packaged-Air-Conditioner-FIG-1 $1$$
RCN-KIT4-E2 $MITSUBISHI-HEAVY-RCN-E2-Wireless-Remote-Control-for-Packaged-Air-Conditioner-FIG-1 $2$$
Ceiling cassette -2 way- (FDTW)
Floor standing -2way- (FDFW) $MITSUBISHI-HEAVY-RCN-E2-Wireless-Remote-Control-for-Packaged-Air-Conditioner-FIG-1 $3$$
Wall mounted (FDK) $MITSUBISHI-HEAVY-RCN-E2-Wireless-Remote-Control-for-Packaged-Air-Conditioner-FIG-1 $4$$

WIRELESS REMOTE CONTROL
All displays are described in the liquid crystal display for explanation

Display section

1	OPERATION MODE display	Indicates selected operation mode.

2

| SET TEMP display| Indicates set temperature.
SLEEP TIMER time display| Indicates the amount of time remaining on the sleep timer.
Indoor function setting number display| Indicates the setting number of the indoor function setting.
3| FAN SPEED display| Indicates the selected air flow volume.
4| UP/DOWN AIRFLOW

display

| Indicates the up/down louver position.
5| LEFT/RIGHT AIRFLOW

display

Operation section

Transmitter:Sends signal to the air conditioner.

1| ON/OFF button| When this is pressed once, the air conditioner starts to operate and when this is pressed once again, it stops operating.
---|---|---
2| MODE button| Every time this button is pressed, displays switch as below $MITSUBISHI-HEAVY-RCN-E2-Wireless-Remote-Control-for-Packaged-Air- Conditioner-FIG-1 $7$$
3| TEMP button| Change the set temperature by pressing or button.
4| FAN SPEED button| The fan speed is switched in the following order: 1-speed ➞ 2-speed ➞ 3-speed ➞ 4-speed ➞ AUTO ➞ 1-speed.
5| U/D button| Used to determine the up/down louver position.
6| L/R button| Used to determine the left/right louver position. (RCN-EK2 only)
7| 3D AUTO button| Used to switch whether or not to enable or disable 3D AUTO mode. (RCN-EK2 only)
8| ON TIMER button| Used to set the ON TIMER.
9| OFF TIMER button| Used to set the OFF TIMER.
@| SELECT button| Used to switch the time when setting the timer or adjusting the time. Used to switch the settings of the indoor function.
A| SET button| Used to determine the setting when setting the timer or adjusting the time. Used to determine the settings of the indoor function. When press and hold SET button ,Child Lock is enabled.
B| CANCEL button| Used to cancel the timer setting.
C| SLEEP button| Used to set the sleep timer.
D| ECO button| Pressing this button starts the energy-saving operation. Pressing this button again cancels it.
E| HI POWER button| Pressing this button starts the high power operation. Pressing this button again cancels it.
F| SILENT button| Pressing this button starts the silent mode control. Pressing this button again cancels it.
G| NIGHT SETBACK button| Pressing this button starts the home leave mode. Pressing this button again cancels it.
H| FILTER button| Pressing this button resets FILTER SIGN.
I| FUNCTION SETTING switch| Used to set the indoor function.
J| TIME SETUP switch| Used to set the current time.
K| ACL switch| Used to reset the microcomputer.

WIRELESS REMOTE CONTROL HANDLING PROCEDURE

REPLACING THE BATTERIES

If the following occurs, the batteries are exhausted. Replace them with new ones.

When the signal is transmitted, the air conditioner does not display reception.
The display fades away or does not show anything.

How to insert batteries

Detach the back lid.
Insert the batteries. (two AAA batteries)
Reattach the back lid.
Adjust the current time.

SETTING AFTER BATTERY REPLACEMENT

When batteries are replaced, the remote control setting, indoor function setting, and time display are reset to the default. After replacing batteries, set them again to the preferred settings.

Change remote control setting

Function	Description	Switching method
Operation mode AUTO	Switches the AUTO mode between Enable and Disable.	MODE
button	While holding down each button, turn the power on or press the ACL

switch.

Indoor function settings (page 10) / CURRENT TIME SETTING PROCEDURE (page 8)
ABOUT BATTERIES

The recommendable effective period of a battery is about 6 to 12 months.(It depends on the usage.)
The recommendable effective period is printed on the battery. This may be shorter due to manufacturing time of the unit.
However the battery may be still working in order after expiry date.
The batteries packaged with the remote control are supplied in order to check operating conditions when usage begins, and subsequently, the life of these batteries may be shorter than that of new batteries.

ATTENTION

When replacing batteries, replace with two new AAA batteries at the same time. (Alkaline batteries are recommended.)
Do not mix old and new batteries or types of batteries (for example, manganese and alkaline batteries).
Do not use rechargeable batteries.

CAUTION CAUTIONS ON SWITCH OPERATIONS

When operating the “FUNCTION SETTING”, “TIME SET UP”, or “ACL” switches, press it straight downward using an object with a short pointed end such as a ballpoint pen. Do not press those switches forcefully at an angle using an object with a long and sharp end such as a mechanical pencil. Otherwise, the buttons may not pop up to their original positions.

HOW TO OPERATE

If you press each button on the wireless remote control while pointing it at the signal receiver of the air conditioner body, a signal is sent. When the signal has been received without a problem, the RUN indicator LED blinks.

ATTENTION

The buttons on the remote control must be operated carefully and securely.
If an error occurs on the display of the remote control
Press the ACL switch with a ballpoint etc. Press the ACL switch to reset to the time set up mode. Set the time correctly.

ABOUT REMOTE CONTROL HOLDER

The remote control can be mounted on the wall or pillar with the remote control holder.
Slide from the upper part of the holder to place or take out the remote control.

ATTENTION

If the remote control signal receiver is exposed to direct sunlight or strong light, the receiver may not be able to receive a signal. In this case, block the sunlight or dim the light.
Do not block the signal between the remote control and the remote control signal receiver.
Do not point the air conditioner wireless remote control at devices such as a TV set that have their own wireless remote control.
The remote control must be handled carefully.
Remove the batteries when the remote control is not used for a long time.
Even if the remote control is not found or damaged, you can operate the air conditioner with itself. See “10. BACKUP SWITCH OPERATION” on .

HOW TO OPERATE

ATTENTION

Turn on the power supply of both indoor/outdoor units for six hours before starting the unit to protect the units. (The crankcase is conducted and the compressor is heated) Do not turn off the power supply. (The crankcase heater is conducted while the compressor is stopped, preventing failure of the compressor due to accumulation of liquid refrigerant by keeping the compressor warm.)
The operation of remote control must be performed slowly and steadily.

Guideline of room temperature setting

COOL ….. 26 to 28°C
DRY …….. 21 to 24°C
HEAT …… 22 to 24°C
FAN……… TEMP setting is unnecessary
- Operation mode can be changed even when the unit stops.
- If you operate under the same condition (operation mode, set temperature, air flow, louver) just follow step 1, no other operations are necessary. The conditions which were set previously are indicated on the remote control.

OPERATION

Press ON/OFF button.
The operation display light (Green) turns on, and the operation starts.
Press MODE button.
The mode will change in the following order by pressing the button.
Press TEMP button.
Set temperature by pressing or button.
Press FAN SPEED button.
The fan speed is switched in the following order: 1-speed ➞ 2-speed 3-speed ➞ 4-speed ➞ AUTO and back to 1-speed.
Press the U/D button.
The up/down airflow changes as shown below each time the button is pressed.

NOTICE

The louver movement does not match the display when the louver is swinging. This is not an error.
The louver is set to horizontal swing mode to prevent you from being exposed directly to cold air during heat preparation or heat defrosting. (The set position shown on the display of the remote control does not change.)
If you select the swing mode while the anti draft setting is enabled, the airflow is set to the horizontal direction.

ATTENTION
Do not set the swing louver downward for a long period of time when the cool mode is active. Otherwise, any dew that has formed on the side panel may drop. (In case of FDE)

Press the L/R button. (RCN-EK2 only)
The left/right airflow changes as shown below each time the button is pressed.

NOTICE

The louver movement does not match the display when the louver is swinging. This is not an error.
When there is a wall on the left of the air conditioner, we recommend that the airflow be directed to the right, and when there is a wall on the right of the air conditioner, direct the airflow to the left.

Press the 3D AUTO button. (RCN-EK2 only)
Switch whether or not to enable or disable 3D AUTO mode. 3D AUTO mode automatically controls the fan speed or airflow direction, which helps efficiently air condition the entire room.

NOTICE

You cannot switch the up/down airflow or left/right airflow in 3D AUTO mode. When changing, cancel 3D AUTO mode.
If 3D AUTO is selected while an FDK model with the switchable left/right airflow function is connected to an indoor unit without the switchable left/right airflow function, the airflow direction of the model that does not have this function is set to the direction that was selected before 3D AUTO mode was enabled.
The left/right airflow switching or 3D AUTO cannot be operated from SC-SL2, SC-SL3, or SC-SL4. Even if the airflow direction is changed from SC-SL2, SC-SL3, or SC-SL4 during 3D AUTO mode, 3D AUTO is not canceled.

Press the ECO button.
Start or cancel the energy-saving operation. (In the cool, heat, or auto mode only) The energy-saving mode automatically controls the performance depending on the outdoor temperature, setting the standard temperature to 28°C in the cool mode and 22°C in the heat mode. This enables the energy-saving operation without compromising room comfort.
Press the HI POWER button.
Start or cancel the high power operation. (In the cool or heat mode only) The high power operation quickly sets the room temperature to a comfortable level. This mode accelerates the operation performance for 15 minutes, and automatically returns to the normal mode after that.

NOTICE

When the system is connected to a centralized device, using the centralized device to specify the set temperature or fan speed during high power operation will cancel high power operation. In that case, the set temperature or fan speed specified using the centralized device may not be applied.
High power operation cannot be used if 4-speed is “disabled” using the indoor unit or remote control.

Press the SILENT button.
Start or cancel the silent mode control. The silent mode preferentially controls the outdoor unit taking quiet operation into consideration.

Press the NIGHT SETBACK button.
Start or cancel the home leave mode. The home leave mode is a function that prevents the room temperature from becoming significantly high or low while you are not home. By factory default, home leave mode is as follows. Each setting can be changed by connecting the eco touch remote control.

Determine temp rule in cooling: 35°C,
Determine temp rule in heating: 0°C,
Set temp rule in cooling: 33°C,
Set temp rule in heating: 10°C,
Fan speed rule in cooling: 1-speed,
Fan speed rule in heating: 1-speed

NOTICE
When the system is connected to SC-SL4, using SC-SL4 to select an indoor unit and to start or cancel home leave mode links all units connected to the wireless receiver and starts or cancels home leave mode.
Stop
Press ON/OFF button.
NOTICE
When the system is connected to a centralized device or wired remote control, the functions that have been locked using a centralized device or wired remote control are not locked on the wireless remote control side.

CURRENT TIME SETTING PROCEDURE

The timer is set based on the current time. Adjust the current time correctly at first of all.

[EXAMPLE] 13:00 setting

Press TIME SET UP switch.
Press it with the tip of ballpoint etc. The time display blinks and can be set to the current time.
Press or button to adjust to 13:00.
If or button is pressed during the blinking, fast-forward or fast-backward can be done.
Press TIME SET UP switch.
The display changes from blinking to steady lighting and the setting is completed. (Press within 60 seconds)

ON – TIMER OPERATION BY CLOCK

Operation is started at the setting time.

1 Press ON TIMER button.
ON TIMER display blinks.
Press or button to adjust to 8:00.
Displayed time will be changed by 10 minutes by pressing the buttons.
Press SET button.
- ```
  * ON TIMER display changes from blinking to steady lighting and the setting is completed. (Press within 60 seconds) TIMER/CHECK display lamp of the receiver is lit.
```
- At 8:00, TIMER display lamp turns off and the air conditioner will start operating.
- In case the ON TIMER is set while the air conditioner is in operation, it will be stopped and ready for restart at the setting time.
- Cancellation
- Press CANCEL button to turn off the TIMER display and timer is canceled.
- After TIMER setting, if ON/OFF button is pressed before the setting time, TIMER display turns off and the TIMER is canceled.
- Time change
- Press ON TIMER button to set again.

OFF – TIMER OPERATION BY CLOCK

Operation is started at the setting time.

[EXAMPLE] If you would like to stop the operation at 21:00

Press ON/OFF button when the air conditioner stops.
The air conditioner starts to operate.
Press OFF TIMER button.
OFF TIMER display blinks.
Press or button to adjust to 21:00.
Displayed time will be changed by 10 minutes by pressing the buttons.
Press SET button.
- ```
  * OFF TIMER display changes from blinking to steady lighting and the setting is completed. (Press within 60 seconds)
```
- TIMER/CHECK display lamp of the receiver is lit.
- At 21:00, TIMER display lamp turns off and the air conditioner will stops operating.
- Cancellation
- Press CANCEL button to turn off the TIMER display and timer is canceled.
- After TIMER setting, if ON/OFF button is pressed before the setting time, TIMER display turns off and the TIMER is canceled.
- Time change
- Press OFF TIMER button to set again.

SLEEP TIMER OPERATION

The operation stops at the specified time.

[EXAMPLE] If you would like to stop the operation 12 hours later

Press SLEEP button.
The OFF TIMER indicator LED lights up. “1H” is displayed. The timer/check indicator LED lights up on the remote control signal receiver.
The display changes as shown below each time the SLEEP button is pressed.
The display changes as follows: 1H ➞ 2H ➞ 3H (one hour increment) ➞ 10H ➞ 11H ➞ 12H ➞ Sleep timer reset ➞ 1H ➞ 12H. By stopping at 12H, operation stops after 12 hours.
- Cancellation
- If you press the SLEEP button or CANCEL button, the timer display disappears and the timer is canceled.
- If you press the RUN/STOP button before the specified time is reached, the timer display disappears and the timer is canceled.
- Changing the set time
- Press SLEEP button to set again.

PROGRAM TIMER OPERATION

By setting both ON TIMER and OFF TIMER, the settings turn into PROGRAM timer mode. Operation and stopping can be performed at the same time every day by setting program timer once.

Set ON TIMER.
- Press ON TIMER button and set the time with or button. Press SET button.
Set OFF TIMER.
- Press OFF TIMER button and set the time with or button. Press SET button.
- Both ON TIMER and OFF TIMER are displayed. The direction of arrow mark changes depending on the status of operation.(stop) (operating) If the same time is set for the ON TIMER and OFF TIMER, is displayed, which makes the program timer – stop the operation at the same time every day.
- Cancellation
- Press CANCEL button to turn off the PROGRAM timer display and timer is canceled. (Operation condition is kept as before the button is pressed.)
- If ON/OFF button is pressed during TIMER operation, TIMER display turns off and the TIMER is canceled. The air conditioner stops operating.
- Changing the set time
- Press OFF TIMER button or ON TIMER button to set again.

INDOOR FUNCTION SETTINGS (Available only with master wireless receiver)

This user’s manual describes how to set the indoor unit functions after installation (power-on) has been completed.

How to set indoor functions
Press the ON/OFF button to stop the unit.
Press the desired one of the buttons shown item 2 while holding down the FUNCTION SETTINGS switch.
Use the selection buttons, and , to change the setting.
Press the SET button. The buzzer on the remote control signal receiver beeps twice, and the LED lamp blinks four times at two-second intervals.
Setting details
The following functions can be set.

Button	Number indicator	Function setting

FAN SPEED

| 00| Fan speed setting : Standard
01| Fan speed setting : Setting 1 1
02| Fan speed setting : Setting 2 1

MODE

FILTER

Operation stop after 1000 hours have elapsed

U/D| 00| Anti draft setting : Disable
01| Anti draft setting : Enable
SILENT| 00| Infrared sensor setting (Motion sensor setting) : Disable
01| Infrared sensor setting(Motion sensor setting) : Enable

HI POWER

| 00| Infrared sensor control(Motion sensor control) : Disable
01| Infrared sensor control(Motion sensor control) : Power control only
02| Infrared sensor control(Motion sensor control) : Auto OFF only
03| Infrared sensor control(Motion sensor control) : Power control and Auto OFF

ON TIMER

OFF TIMER

NIGHT SETBACK

| 00| Remote control signal receiver LED:Brightness High 2
01| Remote control signal receiver LED:Brightness Low 2
02| Remote control signal receiver LED : OFF *2

Refer to technical data.
Can also be set with slave wireless receiver.

BACKUP SWITCH OPERATION

If the batteries are exhausted, or the remote control is malfunctioning or lost, you can use the BACK UP switch on the display section on the body to run or stop the air conditioner as an emergency measure.

Ceiling suspended (FDE)
Ceiling cassette -4 way – (FDT)
Ceiling cassette -4 way Compact – (FDTC)
Ceiling cassette -1 way – (FDTS)
Ceiling cassette -4 way Compact – (FDTC-VG, VH, -KXZE1)
RCN-KIT4-E2
Ceiling cassette -2 way – (FDTW)
Floor standing -2way- (FDFW)
Wall mounted (FDK)

ON/OFF

Press the BACKUP switch described in “2. NAMES AND FUNCTIONS OF REMOTE CONTROL BUTTON” (page 4) and release it in two seconds or less. The operation starts.
When you press this button again, the operation stops.

OPERATION MODE	(AUTO)
SET TEMPERATURE	23°C
FAN SPEED	3-speed
SWING	STOP
ON TIMER/OFF TIMER	Invalid

CHECK INDICATION

If the following LED blinks or any code appears on the monitor display, it indicates that an error has occurred in the air conditioner. Please contact your dealer and inform them “address No. and check code”, “symptom of the trouble”, “air conditioner type” and “model name” etc. Press the ON/OFF button to stay the air conditioner on the stop mode.

Ceiling suspended (FDE)
Ceiling cassette -4 way – (FDT)
Ceiling cassette -4 way Compact- (FDTC)
Ceiling cassette -1 way- (FDTS)
Ceiling cassette -4 way Compact- (FDTC-VG, VH, -KXZE1)

For FDE, FDT, FDTC, or FDTS

The TIMER/CHECK LED blinks (stays on for 0.5 seconds and shuts off for 0.5 seconds), and the air conditioner stops simultaneously.
Address No. is displayed on the CHECK MODE INDICATOR, check code display after address No. turns off.
The monitor display turns off when the display time lapses.
If no codes are displayed on the monitor, operate the remote control or press the BACK UP switch.

RCN-KIT4-E2

For RCN-KIT4-E2
- The RUN/CHECK LED blinks (stays on for 0.5 seconds and shuts off for 0.5 seconds), and the air conditioner stops simultaneously.
- Address No. and check code are displayed on the check mode indicator.
- The monitor display turns off when the display time lapses.
- If no codes are displayed on the monitor, operate the remote control or press the BACK UP switch.
Ceiling cassette -2 way- (FDTW)
Floor standing -2way- (FDFW)
For FDTW, FDFW
- The TIMER/CHECK LED blinks (stays on for 0.5 seconds and shuts off for 0.5 seconds), and the air conditioner stops simultaneously.
- Only the number that corresponds to the “tens place” or “ones place” of the error code on the “CHECK 1” or “CHECK 2” indicator LED blinks (10 seconds per cycle).
- To indicate an error code, the LED blinks as shown below.
- Example: For E39
Wall mounted (FDK)
For FDK
- Only the number that corresponds to the “tens place” or “ones place” of the error code on the RUN/CHECK1 LED or TIMER/CHECK2 LED blinks (10 seconds per cycle), and the air conditioner stops simultaneously.
- To indicate an error code, the LED blinks as shown below.
- Example: For E39

FILTER SIGN

If the FILTER SIGN LED blinks as shown below, clean the filter.

Ceiling suspended (FDE)
Ceiling cassette -4 way – (FDT)
Ceiling cassette -4 way Compact – (FDTC)
Ceiling cassette -1 way – (FDTS)
Ceiling cassette -4 way Compact- (FDTC-VG, VH, -KXZE1)
Floor standing -2way- (FDFW)
Ceiling cassette -2 way – (FDTW)
For FDE, FDT, FDTC, FDTS or FDTW
- The TIMER/CHECK LED long-blinks (stays on for two seconds and shuts off for one second).
- When filter cleaning is complete, press the FILTER button on the remote control to reset the filter.
Wall mounted (FDK)
For FDK
- The TIMER/CHECK2 LED long-blinks (stays on for two seconds and shuts off for one second).
- When filter cleaning is complete, press the FILTER button on the remote control to reset the filter.
RCN-KIT4-E2
For RCN-KIT4-E2
- The FILTER SIGN LED long-blinks (stays on for two seconds and shuts off for one second).
- When filter cleaning is complete, press the FILTER button on the remote control to reset the filter.

NOTICE
The FILTER SIGN setting time can be changed in the indoor function setting. The default is set to 180 hours.

CONTACT

MITSUBISHI HEAVY INDUSTRIES THERMAL SYSTEMS, LTD.

2-3, Marunouchi 3-chome, Chiyoda-ku, Tokyo, 100-8332, Japan http ://www.mhi-mth.co.jp

MITSUBISHI HEAVY INDUSTRIES AIR-CONDITIONING EUROPE, LTD.

5 The Square, Stockley Park, Uxbridge, Middlesex, UB11 1ET, United Kingdom
Tel : +44-333-207-4072
Fax : +44-333-207-4089
http://www.mhiae.com.

MHIAE SERVICES B.V.

(Wholly-owned subsidiary of MITSUBISHI HEAVY INDUSTRIES AIR-CONDITIONING EUROPE, LTD.) Herikerbergweg 238, Luna ArenA, 1101 CM Amsterdam, Netherlands
P.O.Box 23393 1100 DW Amsterdam, Netherlands
Tel : +31-20-406-4535
http://www.mhiaeservices.com/.

MITSUBISHI HEAVY INDUSTRIES AIR-CONDITIONERS AUSTRALIA, PTY. LTD.

Block E, 391 Park Road, Regents Park, NSW, 2143 PO BOX 3167, Regents Park, NSW, 2143
Tel : +61-2-8774-7500
Fax : +61-2-8774-7501
https://www.mhiaa.com.au.

MITSUBISHI HEAVY INDUSTRIES – MAHAJAK AIR CONDITIONERS CO., LTD.

220 Lad Krabang Industrial Estate Free Zone 3, Soi Chalongkrung 31, Kwang Lamplatiew,
Khet Lad Krabang, Bangkok 10520, Thailand
Tel : +66-2-326-0401
Fax : +66-2-326-0419
http://www.maco.co.th.

This product complies with following directives/regulations

EU

MD 2006/42/EC
LVD 2014/35/EU
EMC 2014/30/EU
RoHS 2011/65/EU
Ecodesign 2009/125/EC

GB

SMR S.I. 2008/1597
EER S.I. 2016/1101
EMC S.I. 2016/1091
RoHS S.I. 2012/3032
Ecodesign S.I. 2020/1528

CE and UKCA marking is applicable to the area of 50 Hz power supply

Thank you very much for your purchasing the WIRELESS REMOTE CONTROL for our packaged air conditioner.
This user’s manual describes cautions for safety. Please read this manual carefully before use in order to operate the unit properly.
Keep this manual, after reading, at a safe place where you can consult it whenever it is necessary.
When the ownership of the unit is changed, please be sure to transfer this manual and the “Installation Manual” to a new owner.
It is not recommended for a user to install or move the unit by the user’s own discretion. (Safety or functions may not be assured.)