speedlink SL-650110-BK Wireless – for PC/PS3/Switch/OLED, rubber-black User Guide

speedlink SL-650110-BK Wireless – for PC/PS3/Switch/OLED, rubber-black

GET STARTED

DOWNLOAD THE SOFTWARE AT : www.speedlink.com

CHARGING

First, charge the gamepad: using the USB-C connection cable, connect the gamepad to any free USB port on the PC or another USB power source. The gamepad’s LEDs will flash during charging which takes up to 2 hours; be aware, the initial charge may take longer.

SOFTWARE INSTALLATION

Always download the latest driver software for the best possible performance. You can find it on the Speedlink website at www.speedlink.com. You will need to install the software to use the vibration function with some games.

**CONNECTION SETTINGS: PLAYSTATION 3TM***
Connect the USB receiver to the PlayStation 3TM console USB port.

NINTENDO SWITCH

1. On your Nintendo SwitchTM, select the menu item “System Settings” → “Controllers and Sensors” → “Pro Controller Wired Communication”. Select “on”.
2. Connect the included USB receiver to the Nintendo SwitchTM charging dock. PC Connect the USB receiver to the computer USB port.

PC – XINPUT UND DirectInput
Press and hold the „Mode“ button for six seconds to switch Press and hold the „Mode“ button for six seconds to switch between the gamepad‘s two modes of operation: XInput (for most of the latest games) and DirectInput* (for all older and some of the newer). Please set the gamepad to the desired mode before you start a game. Switching while a game is running may cause the controller to not be recognized correctly by the game; in this case please restart the game. To find out which mode works best for a game, please refer to the manual, contact the manufacturer or try it out.

RAPID FIRE FUNCTION

The rapid-fire function will activate key several times in rapid succession as long as it is pressed. To do this, keep the „Rapid“ key pressed and simultaneously press the key for which the function is to be activated. To set the key back to single fire mode, press the key again while holding down the „Rapid“ key.

SETTINGS

Test the gamepad’s functions by opening the Windows Settings and search for “Set up USB game controllers“. In DirectInput mode, you will also find the options there for the vibration function; for XInput games, configure the vibration functions in the game’s options settings. Please note, vibration functions only work if supported by the game and the relevant option is enabled in the game’s options settings.

Technical support: www.speedlink.com

Safety instructions: www.speedlink.com/en/Safety- instructions

WEEE: Dispose the product at a recycling point. Do not dispose together with household waste. Incorrect storage/ disposal can harm the environment and/or cause injury. Speedlink declares that this product complies with the directives listed in the section ‘Conformity notice’.

INTENDED USE

This product is intended to be used as an input device for connecting to a computer and is for indoor home/office use only. It contains no user- serviceable parts. Do not disassemble it and stop using it immediately if damaged. Speedlink GmbH accepts no liability whatsoever for any damage to this product or injuries caused due to careless or improper use or for purposes for which it is not intended. Please keep this information for later reference. The latest user guide can always be found on the product page at www.speedlink.com.

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Please note that the failure to observe these instructions can cause product damage, explosion, fire and/or electric shocks!

• Only use this device as indicated in the user guide. Do not open or repair it.
• Do not expose the device to liquids, heat or cold.
• Do not use the device in a damp environment. Clean the device with a dry cloth.
• Keep the device and all loose parts away from children, pets and unauthorized persons.
• Only use the devices with the appropriate provided accessories/cables.
• Disconnect the charging cable from the device if it will not be used for a long time. When disconnecting the cable, don’t pull on the cord but on the plug.
• Don’t use the cables in any way other than mentioned in the user guide; don’t bend, cut, extend, knot or step on them.
• Do not insert any foreign objects into the openings of the device.
• If the device is damaged in any way or gets too hot, stop using it immediately.
• Take caution when using the device if you have a pacemaker or are dependent on other sensitive electronic life aids, as the device emits radio signals. Safety instructions in further languages:
  www.speedlink.com/en/Safety-instructions.

WARNING SYMBOLS AND MARKINGS

Li-ion battery. Further information: www.speedlink.com

CONFORMITY NOTICE
Operation of the device (the devices) may be affected by strong static, electrical or high-frequency fields (radio installations, mobile telephones, microwaves, electrostatic discharges). If this occurs, try increasing the distance from the devices causing the interference. Conformity notice in further languages: www.speedlink.com/en/Safety- instructions.

CONFORMITY NOTICE

IMPORTER/MANUFACTURER:

• Speedlink GmbH
• Im Dorf 5
• 27404 Heeslingen
• Deutschland
• Phone: (+49) 4287 9244-0

PRODUCT DETAILS:

• Product no.: SL-650110-BK
• Type description: RAIT Gamepad – Wireless – for PC/PS3*/Switch, rubber-black

THE PRODUCT COMPLIES WITH THE FOLLOWING DIRECTIVES

• EMC 2014/30/EU
• RoHS 2011/65/EU

For a full declaration of conformity, please visit the product page at www.speedlink.com and scroll to Downloads. Also the latest user guide can always be found on the product page.

• RF frequency range: 2.402GHz – 2.480GHz
• RF power transmission: < 0dBi
• Further information: www.speedlink.com

Windows and DirectInput are registered trademarks of Microsoft Corporation in the United States and other countries. Nintendo Switch is a registered trademark of Nintendo Co., Ltd. PlayStation 3 and PS3 are registered trademarks of Sony Computer Entertainment Inc. All rights reserved. Speedlink, the Speedlink word mark and the Speedlink swoosh are registered trademarks of Zeitfracht GmbH & Co. KGaA. The Instagram logo is a registered trademark/service mark of Instagram LLC. The Facebook logo is a registered trademark of Facebook Inc. The Twitter logo is a registered trademark of Twitter Inc. The YouTube logo is a registered trademark of YouTube LLC. All trademarks are the property of their respective owner. Speedlink GmbH shall not be made liable for any errors that may appear in this manual. Information contained herein is subject to change without prior notice. Please keep this information for later reference.

References

• speedlink
• Safety instructions
• Sicherheitshinweise
• speedlink
• speedlink

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>