COOLON CP34 Industrial LED Luminaire Instruction Manual
- June 12, 2024
- COOLON
Table of Contents
COOLON CP34 Industrial LED Luminaire
DIMENSIONS
CP34 Luminaire with Fixed Plant Bracket
281AL Aluminium Enclosure
Technical Specifications
VOLTAGE IN
90 – 305VAC 50/60Hz
POWER
140W
IP/IK RATING
IP66 / IK09
OPERATING TEMPERATURE
-20 to +50°C
MOUNTING BRACKET INSTALLATION
Step 1
Mount light fitting to appropriate location.
Fixed Plant Bracke
Step 2
To adjust the mounting angle, unscrew bolt and loosen dome nut.
Step 4
Adjust the angle of the light fitting, and line up bracket holes to either the
top or bottom mounting holes.
Step 4
Use Loctite® 243™ retaining compound (not included) to secure the dome nut.
Screw in and tighten bolts on both sides.
KIT CONFIGURATION
Distance between the power supply and luminaire can be extended up to 15m. The
voltage drop on the cable must not exceed 2V.
A wiring connection must be made from the input wiring terminal to the loop
out terminal where optional loop out is required.
Customer Support
support@coolon.com.au • aus. 1300 287 533 •
intl. +613 8681 3633
• www.coolon.com.au
As a matter of continual improvement, the requirements and recommendations in
our manuals evolve to reflect new industry requirements and the latest
feedback from the field.
The Coolon team is working hard to ensure optimal product operation and the
safety of all users, please check our website periodically to ensure you are
up to date with the latest information.
Product must be installed by a suitably qualified person. All documentation is
subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>