V I V O DESK-V111VT Black Electric Mobile Compact Desk Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
V I V O DESK-V111VT Black Electric Mobile Compact Desk
Product Information
The Black Electric Mobile Compact Desk is a versatile and functional desk that can be easily moved around. It has an adjustable height feature that allows users to customize it to their preferred height. The desk comes with a control panel that enables users to adjust the desk’s height, making it suitable for people of different heights. The desk also has a keyboard tray that can be adjusted to the user’s preferred angle.
Contents
- 1 (x1) Desktop
- 2 (x1) Desk Support Bracket
- 3 (x1) Desk Support Bracket
- 4 (x1) Support Frame
- 5 (x1) Control Panel
- 6 (x1) Leg
- 7 (x2) Support Bracket
- 8 (x1) Keyboard Tray
- 9 (x2) Keyboard Brackets
- 10 (x1) Control Unit
- 11 (x1) Base
- 12 (x1) Plastic Sleeve
- 13 (x1) Power Cable
- A (x4) Caster
- B (x18) M5x14
- C (x6) M5x12 Flat Head Screw
- D (x2) M4x12
- E (x12) M6x12
- F (x1) 4mm Allen Wrench
- H (x1) Wrench
Product Specifications
- SKU: DESK-V111VT
- Weight Capacity: 88 lbs (39.92 kg)
- Adjustable Height: Yes
- Control Panel: Yes
- Keyboard Tray: Yes
Tools Needed
- Phillips Screwdriver
Warnings and Safety Instructions
Before using the Black Electric Mobile Compact Desk, please ensure that you read and understand the following warnings and safety instructions:
- Choking Hazard – Small Parts: Not for children under 3 years. Adult supervision is required.
- Electrical Safety Instructions: Do not exceed the weight capacity of 88 lbs (39.92 kg). Failure to do so may result in serious injury.
Product Usage Instructions
Follow these steps to assemble and use the Black Electric Mobile Compact Desk:
-
Screw the casters (A) into the underside of the base (11) using the provided wrench (H).
-
Install the plastic sleeve (12) to the top of the base, then install the leg (6) to the base using x4 M6x12 bolts (E). Tighten bolts with the Allen wrench (F).
-
Place the support frame (4) on top of the leg with the slots facing down and long end forward, making sure the pre-installed bolts on the leg insert into the slots. Tighten bolts with the Allen wrench (F).
-
Install the desk support brackets (2, 3) to the front and back of the support frame using x6 M6x12 bolts (E), and tighten with the Allen wrench (F).
-
Install the desktop (1) to the top of the frame using x6 M5x14 screws (B), and tighten with a Phillips screwdriver.
-
Mount support brackets (7) to the bottom of the desktop using x8 M5x14 screws (B), and tighten with a Phillips screwdriver.
-
Mount the control panel (5) to the front of the desktop using x2 M4x12 bolts (D).
-
Install the control unit (10) to the bottom of the desktop using x2 M5x14 screws (B), and tighten with a Phillips screwdriver.
Connect the motor and control panel cables to the control unit.
( NOTE: Make sure the connections for the motor and control panel are facing towards the center of the desk). -
Secure keyboard brackets (9) to keyboard tray (8) by using x6 M5x12 flat head screws (C).
-
Plug the power cable (13) into an AC wall outlet, then use the control panel to adjust the height.
Caution: Failure to follow these instructions may result in property damage and/or personal injury.
If you have any questions or need assistance with assembly or usage of the Black Electric Mobile Compact Desk, please contact our dedicated support team at help@vivo-us.com or call us at 309-278-5303. We are available Monday-Friday from 7:00am-7:00pm CST.
SKU: DESK-V111VT
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/desk-v111vt
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
- help@vivo-us.com
- www.vivo-us.com
- Chat live with an agent!
- 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND
ELECTRIC SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
- DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
- DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
- NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR SELLER TO REPLACE DAMAGED PARTS.
- NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE MADE CONTACT WITH LIQUIDS.
- ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
- OUTDOOR USE IS PROHIBITED.
PACKAGE CONTENTS
TOOLS NEEDED
Phillips Screwdriver
DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious
injury.
ASSEMBLY STEPS
-
Screw the casters (A) into the underside of the base (11) using the provided wrench (H).
-
Install the plastic sleeve (12) to the top of the base, then install the leg (6) to the base using x4 M6x12 bolts (E). Tighten bolts with the Allen wrench (F).
-
Place the support frame (4) on top of the leg with the slots facing down and long end forward, making sure the pre-installed bolts on the leg insert into the slots. Tighten bolts with the Allen wrench (F).
-
Install the desk support brackets (2, 3) to the front and back of the support frame using x6 M6x12 bolts (E), and tighten with the Allen wrench (F).
-
Install the desktop (1) to the top of the frame using x6 M5x14 screws (B), and tighten with a Phillips screwdriver.
-
Mount support brackets (7) to the bottom of the desktop using x8 M5x14 screws (B), and tighten with a Phillips screwdriver.
-
Mount the control panel (5) to the front of the desktop using x2 M4x12 bolts (D).
-
Install the control unit (10) to the bottom of the desktop using x2 M5x14 screws (B), and tighten with a Phillips screwdriver. Connect the motor and control panel cables to the control unit. (NOTE: Make sure the connections for the motor and control panel are facing towards the center of the desk).
NOTE: It may be necessary to plug the motor cable into the control unit (10) before installing the control unit. -
Secure keyboard brackets (9) to keyboard tray (8) by using x6 M5x12 flat head screws (C).
-
Plug the power cable (13) into an AC wall outlet, then use the control panel to adjust the height.
caution
- Keep monitor and laptop base fully on the desktop.
- Follow the cable routing instructions to avoid the potential to pinch cables.
- Leave enough slack in cable to allow for full range of vertical motion (15″ / 38 cm).
- Raise desktop slowly to keep items stable.
Failure to follow these instructions may result in property damage and/or personal injury.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
- 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
- www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M
- help@vivo-us.com AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- 36" Electric Mobile Compact Desk – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>