COOLON Zeeno LED High Bay 150W Instruction Manual
- June 12, 2024
- COOLON
Table of Contents
COOLON Zeeno LED High Bay 150W Instruction Manual
Zeeno LED High Bay 150W / 240W
Technical Specifications
-
VOLTAGE IN
200 – 440VAC 50/60Hz -
POWER
154W / 245W -
IP/IK RATING
IP65 / IK08 -
OPERATING TEMPERATURE
-20 to +50°C
INSTALLATION INSTRUCTIONS – HOOK MOUNTED
Step 1
Hook the ZEENO to chain* and connect the cable.
Chain and carabiner not included.
WIRING
The ZEENO comes pre-wired with an Australian mains plug. Otherwise if
required, the internal conductors are coloured as below.
ATTENTION
Excessive and prolonged obstruction of the optical surface may result in associated damage which is not covered by warranty.
Customers must select an appropriate method and material for the mounting of luminaires/equipment.
Avoid mixing materials which may lead to premature equipment failure or insecure mounting due to corrosion or accelerated wear and tear.
Customers should account for environmental factors such as temperature, wind, vibration, shock, impact, etc. when identifying appropriate mounting
A periodic inspection and maintenance plan should be established in accordance with environmental and other relevant factors affecting the long term luminaire/equipment operation and secure mounting.
A secondary fall arrest kit is recommended for all suspended
luminaires/equipment.
IMPORTANT
The ZEENO comes pre-wired with an Australian mains plug. Otherwise if required, the internal conductors are coloured as below.
IMPORTANT
Primary use: commercial and industrial applications.
- Read through this manual before installation
- Handle the product with care
- Class I products must be grounded
- The product must be installed by a suitably qualified person
- Do not stare at operating lamp, may be harmful to the eyes
- Turn OFF the power before installation and maintenance
- Make sure the product is securely installed
- The housing might become hot after operation
- Keep optical face clean
support@coolon.com.au • aus. 1300 287 533 • intl. +613 8681 3633 • www.coolon.com.au Page 1 / 1
As a matter of continual improvement, the requirements and recommendations in our manuals evolve to reflect new industry requirements and the latest feedback from the field.
The Coolon team is working hard to ensure optimal product operation and the safety of all users, please check our website periodically to ensure you are up to date with the latest information. Product must be installed by a suitably qualified person. All documentation is subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>