ejendals TEGERA 9125 Protective Gloves User Guide

: June 12, 2024
: ejendals

Table of Contents

INSTRUCTIONS FOR USE
CUSTOMERS SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ejendals TEGERA 9125 Protective Gloves

ejendals TEGERA 9125 Protective Gloves

INSTRUCTIONS FOR USE

PRODUCT SPECIFIC INFORMATION ONLY ON THIS PAGE

Logo
9125

Synthetic leather glove, half-lined, Microthan®+, diamond grip pattern, polyester, tricot, Cat. II, black, grey, yellow, reinforced fingers and thumb, reinforced seams, breathable back, elasticated 360°, for all-round work

EN ISO 21420:2020

EN 388:2016+A1:2018

OUTER MATERIAL SPECIFICATION Polyurethane, nylon, polyester
INNER MATERIAL SPECIFICATION Polyester, cotton
SIZE RANGE (EU) 7,8,9,10,11,12,13
EU-TYPE EXAMINATION 2777 Satra Technology Europe Ltd Bracetown Business Park, Clonee, Dublin 15, Dublin, Ireland
Symbol

Carefully read these instructions before using this product.

EXPLANATION OF PICTOGRAMS 0 = Below the minimum performance level for the given individual hazard X= Not submitted to the test or test method not suitable for the glove design or material
Warning! This product is designed to provide protection specified in PPE Regulation (EU) 2016/425 and PPE Regulation 2016/425 as amended and brought into UK law with the detailed levels of performance presented below. However, always remember that no item of PPE can provide full protection and caution must always be taken when exposed to risks.

DECLARATION OF CONFORMITYwww.ejendals.com/conformity

EN 388:2016 +A1:2018

A. Abrasion resistance Min. 0; Max. 4
B. Blade cut resistance Min. 0; Max. 5
C. Tear resistance Min. 0; Max. 4
D. Puncture resistance Min. 0; Max. 4
E. Cut Resistance TDM Min. A; Max.
F (EN ISO13997), F. Impact Protection P=Pass

PROTECTIVE GLOVES AGAINST MECHANICAL RISKS.
Protection levels are measured from area of glove palm. Warning: For gloves with two or more layers the overall classification of EN 388:2016 +A1:2018 does not necessarily reflect the performance of the outmost layer. Do not use these gloves near moving elements or machinery with unprotected parts. For dulling during the cut resistance test, the coupe test results are only indicative while the TDM cut resistance test is the reference performance result. Abrasion resistance according to the American National Standard Institute 105-2016. Levels 1-6

EN ISO 21420:2020 PROTECTIVE GLOVES – GENERAL REQUIREMENTS AND TEST METHODS

Finger dexterity test: Min. 1; Max. 5

FITTING AND SIZING: All sizes comply with the EN ISO 21420:2020 for comfort, fit and dexterity, if not explained on the front page. If the short model symbol is shown on the front page, the glove is shorter than a standard glove, in order to enhance the comfort for special purposes – for example fine assembly work. Only wear the products in a suitable size. Products which are either too loose or too tight will restrict movement and will not provide the optimal level of protection.

STORAGE AND TRANSPORT: Ideally stored in dry and dark condition in the original package, between +10º – +30ºC.

INSPECTION BEFORE USE: Check that the glove does not present holes, cracks, tears, colour change etc. If the product becomes damaged it will NOT provide the optimal protection and must be disposed of. Never use a damaged product. Wear (or take off) gloves one at a time. Replace gloves regularly for hygienic use

SHELF LIFE: The nature of the materials used in this product means that the life of this product cannot be determined as it will be affected by many factors, such as storage conditions, usage etc.

CARE AND MAINTENANCE: Gloves/sleeves that can be mechanically washed will carry laundry symbols. It is the customer or launderer who is responsible for the performance of the gloves after laundering when the gloves have already been used. Ejendals cannot be held liable for this

DISPOSAL: According to local environmental legislations. ’

The glove contains natural rubber which may cause allergy.

ALLERGENS: This product may contain components that may be a potential risk to allergic reactions. Do not use in case of hypersensitivity signs. For more information contact Ejendals.

latex free yes no