ejendals TEGERA 126A Welders Gloves Instruction Manual

: June 17, 2024
: ejendals

Table of Contents

ejendals TEGERA 126A Welders Gloves
Product Specifications
Product Usage Instructions
INSTRUCTIONS FOR
EN 420:2003 + A1:2009 PROTECTIVE GLOVES – GENERAL REQUIREMENTS AND TEST
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ejendals TEGERA 126A Welders Gloves

Product Specifications

EN 420:2003 + A1:2009
EN 388:2016 2111X
EN 407:2004 412X4X
EN 12477:2001 Type B EN 1149-2:1997 + A1:2005
R:2.55×10
Outer Material Specification: Leather, natural latex
Size Range (EU): 7, 8, 9, 10, 11
EU-Type Examination: 2777 Satra Technology Europe Ltd Bracetown Business Park, Clonee, Dublin 15, Dublin, Ireland
Ongoing Conformity Carried Out By: 2777 Satra Technology Europe Ltd Bracetown Business Park, Clonee, Dublin 15, Dublin, Ireland
UKCA-Type Examination: 0321 SATRA Technology Centre, Wyndham Way, Telford Way, Kettering, Northamptonshire, NN16 8SD, United Kingdom
UKCA Ongoing Conformity Carried Out By: 0321 SATRA Technology Centre, Wyndham Way, Telford Way, Kettering, Northamptonshire, NN16 8SD, United Kingdom

Product Usage Instructions

Instructions for Use – Category III
Carefully read these instructions before using this product.

Explanation of Pictograms

0 = Below the minimum performance level for the given individual hazard
X = Not submitted to the test or test method not suitable for the glove design or material

Warning!
This product is designed to provide protection specified in PPE Regulation (EU) 2016/425 and PPE Regulation (EU) 2016/425 as amended and brought into UK law with the detailed levels of performance presented below. However, always remember that no item of PPE can provide full protection and caution must always be taken when exposed to hazardous chemicals or other high-risk situations.

The performance levels are for products in new condition and do not reflect the actual duration of protection in the workplace due to other factors influencing the performance such as temperature, abrasion, degradation, etc.

EN 407:2004 – Protective Gloves Against Thermal Risks (Heat and/or Fire)
Performance (A-F):

A: Burning behaviour
B: Contact heat (Min. 0; Max. 4)
C: Convective heat
D: Radiant heat
E: Small splashes of molten metal
F: Large quantities of molten metal

Warning : EN 407:2004: if the glove consists of separate parts which are not permanently interconnected, the performance levels and the protection only apply to the complete assembly. If the gloves have a performance level 1, 2, or X in burning behavior in EN 407:2004, the gloves should not come in contact with naked flame.

EN 388:2016
Performance

A. Abrasion resistance (Min. 0; Max. 4)
B. Blade cut resistance (Min. 0; Max. 5)

FAQ

Q: What is the size range available for this product?
A: The size range available is EU 7, 8, 9, 10, and 11.
Q: Where can I find the Declaration of Conformity for this product?
A: The Declaration of Conformity can be found at www.ejendals.com/conformity.
Q: Who carries out the ongoing conformity for this product?
A: The ongoing conformity is carried out by 2777 Satra Technology Europe Ltd in Dublin, Ireland.
Q: What is the contact information for ejendals ab?
A: You can reach ejendals ab at Phone +46 (0) 247 360 00, Fax +46 (0) 247 360 10, or via email at info@ejendals.com or or der@ejendals.com. More information can also be found at www.ejendals.com.

INSTRUCTIONS FOR

USE PRODUCT SPECIFIC INFORMATION ONLY ON THIS PAGE

TeGera® 126a
Welding and heat-resistant glove, unlined, full grain goatskin of top quality, Cat. III, white, yellow, withstands contact heat up to 100°C, reinforced seams, elasticated 180°, for assembly work

OUTER MATERIAL SPECIFICATION Leather, natural latex
SIZE RANGE (EU) 7, 8, 9, 10, 11
EU-TYPE EXAMINATION 2777 Satra Technology Europe Ltd Bracetown Business Park, Clonee, Dublin 15, Dublin, Ireland
ONGOING CONFORMITY CARRIED OUT BY 2777 Satra Technology Europe Ltd Bracetown Business Park, Clonee, Dublin 15, Dublin, Ireland
UKCA-TYPE EXAMINATION
0321 SATRA Technology Centre, Wyndham Way, Telford Way, Kettering, Northamptonshire, NN16 8SD, United Kingdom
UKCA ONGOING CONFORMITY CARRIED OUT BY
0321 SATRA Technology Centre, Wyndham Way, Telford Way, Kettering, Northamptonshire, NN16 8SD, United Kingdom

INSTRUCTIONS FOR USE – CATEGORY III
SEE FRONT PAGE FOR PRODUCT SPECIFIC INFORMATION

DECLARATION OF CONFORMITY Carefully read these instructions before using this product. www.ejendals.com/conformity EXPLANATION OF PICTOGRAMS 0 = Below the minimum performance level for the given individual hazard X= Not submitted to the test or test method not suitable for the glove design or material
Warning! This product is designed to provide protection specified in PPE Regulation (EU) 2016/425 and PPE Regulation (EU) 2016/425 as amended and brought into UK law with the detailed levels of performance presented below. However, always remember that no item of PPE can provide full protection and caution must always be taken when exposed to hazardous chemicals or other high risk situations. The performance levels are for products in new condition and do not reflect the actual duration of protection in the workplace due to other factors influencing the performance such as temperature, abrasion, degradation, etc.

EN 407:2004 PROTECTIVE GLOVES AGAINST THERMAL RISKS (HEAT AND/OR FIRE)

A: Burning behaviour
B: Contact heat
C: Convective heat
D: Radiant heat
E: Small splashes of molten metal
F: Large quantities of molten metal

Warning: EN 407:2004: if the glove consists of separate parts which are not permanently interconnected, the performance levels and the protection only apply to the complete assembly. If the gloves have a performance level 1, 2 or X in burning behavior in EN 407:2004 the gloves should not come in contact with naked flame.

EN 388:2016

PROTECTIVE GLOVES AGAINST MECHANICAL RISKS. Protection levels are measured from area of glove palm. Warning: For gloves with two or more layers the overall classification of EN 388:2016 does not necessarily reflect the performance of the outmost layer. Do not use these gloves near moving elements or machinery with unprotected parts. For dulling during the cut resistance test, the coupe test results are only indicative while the TDM cut resistance test is the reference performance result.

EN 12477:2001 +A1:2005 PROTECTIVE GLOVES FOR WELDERS

Warning: EN 12477:2001+A1:2005 has no standardised test method at present for detecting UV penetration of materials for gloves but the current methods of construction of protective gloves for welders do not normally mally allow penetration of UV radiation. When gloves are intended for arc welding: these gloves do not provide protection against electric shock caused by defective equipment or live working, and the electrical resistance is reduced if gloves are wet, dirty or soaked with sweat, which could increase the risk.

TYPE B HIGHER DEXTERITY
(WITH LOWER OTHER PERFORMANCE)

EN 1149-2:1997 PROTECTIVE CLOTHING – ELECTROSTATIC PROPERTIES – PART 2:
Test method for measurement of the electrical resistance through a material (vertical resistance).

EN 420:2003 + A1:2009 PROTECTIVE GLOVES – GENERAL REQUIREMENTS AND TEST

METHODS

Finger dexterity test: Min. 1; Max. 5

FITTING AND SIZING: All sizes comply with the EN 420:2003+A1:2009 for comfort, fit and dexterity, if not explained on the front page. If the short model symbol is shown on the front page, the glove is shorter than a standard glove, in order to enhance the comfort for special purposes – for example fine assembly work. Only wear the products in a suitable size. Products which are either too loose or too tight will restrict movement and will not provide the optimal level of protection.
STORAGE AND TRANSPORT: Ideally stored in dry and dark condition in the original package, between +10º – +30ºC.
INSPECTION BEFORE USE: Check that the glove does not present holes, cracks, tears, colour changes etc. If the product becomes damaged it will NOT provide the optimal protection and must be disposed of. Never use a damaged product. For more information contact Ejendals.
SHELF LIFE: The nature of the materials used in this product means that the life of this product cannot be determined as it will be
affected by many factors, such as storage conditions, usage etc.
CARE AND MAINTENANCE: The user bares sole responsibility for submitting the product to mechanical washing after use, as unknown substances can contaminate the product during use and may affect the performance levels of the product. To care for your product, we recommend that you rinse in cold water and line dry in room temperature.
DISPOSAL: According to local environmental legislations.
The glove contains natural rubber which may cause allergy.
ALLERGENS: This product may contain components that may be a potential risk to allergic reactions. Do not use in case of hypersensitivity signs. For more information contact Ejendals.