Monster MH31902 PERSONA HEADPHONES User Guide
- June 5, 2024
- Monster
Table of Contents
PERSONA HEADPHONES
User Guide
Model No: MH31902
Quick Start Guide
Please read this Quick Start Guide carefully and keep it for future use.
Product Overview
- Headphones
- Audio Cable
- Charging Cable
- Quick Start Guide & Warranty letter
- Carry Pouch
- Volume Up Button, Track Forward
- Volume Down Button, TrackBack
- Multi-Function Button (MFB) (Power On/Play/Pause…)
- Bluetooth white indication light
- AUX interface
- ANC green indication light
- Active Noise Cancellation (ANC) Button
Power On/Off
In power-off mode, press and hold the MFB for about 2 seconds to power on the
headphones, the white indicator is on for 1 second and you will hear “Power
on”.
In power-on mode, press and hold the MFB for about 5 seconds to power off the
headphones, the white indicator is on for 1 second and you will hear “Power
off”.
Pairing
In power-off mode, press and hold the MFB for about 5 seconds until the
indicator light flashes white, and you hear “Power on”…” Pairing”. Now
headphones are in pairing mode. Activate Bluetooth on your equipment and set
it to search for new devices (new Monster device). When the headphones are
paired successfully, “Paired. Your device is connected” will be heard. Note:
When you unbox the headphones and power it on for the first time, it will
enter to pairing ode automatically.
Volume Control
Short press the Volume Up or Down Button to turn the volume up or down, you
hear a tone once you reach the maximum volume or minimum volume.
Call
Answer/End Call: short press the MFB
Reject Call: long-press the MFB for about 2 seconds
Redial: quickly double press the MFB for redial of the last dialed phone
number
Music
Play/Pause: In the music playback mode, press the MFB to play/pause music.
Trackback: In the music playback mode, press and hold the Volume Down Button
for 2 seconds for the previous song.
Track forward: In the music playback mode, press and hold the Volume Up Button
for 2 seconds for the next song.
Active Noise Cancellation (ANC)
Turn on ANC function: When ANC is off, short press the ANC button to activate
the active noise cancellation function. When ANC is on, the indicator stays
green You will hear the “ANC ON”. Turn off ANC function: When ANC is on, short
press the ANC button to deactivate the active noise cancellation function You
will hear the “ANC OFF”.
Reset Paired Device List
After power on, no Bluetooth device is connected, press and hold the MFB and
Volume Up Button simultaneously for about 5 seconds.
LED Guide to Indicator Lights
| Mode | Description | Indication |
|---|---|---|
| Power On | White LED indicator lights for about 1 second | “Power On” |
| Power Off | White LED indicator lights for about 1 second | “Power Off” |
| Pairing | White LED flashes quickly | “Pairing” |
| Connected | No function operation, the indicator light is off | “Paired, Your |
device is connected”
ANC On| The green light is on| “ANC ON”
ANC Off| The green indicator is off| “ANC OFF”
Listen Responsibly
To avoid hearing damage, make sure that the volume on your music player is
turned down before connecting your headphones. After placing headphones in/on
your ears, gradually turn up the volume until you reach a comfortable
listening level.
Noise levels are measured in decibels (dB), exposure to any noise at or above
85 dB can cause gradual hearing loss.
Monitor your use; hearing loss is a function of loudness versus time. The
louder it is, the less time you can be exposed to it. The softer it is, the
more time you can listen to it. Get the most out of your equipment and enjoy
the great audio performance even at safe levels. Our headphones will allow you
to hear more details at lower volume levels than ever before.
Learn how to establish a safe listening level and review other important
safety guidelines from the Consumer Electronics Association at
www.ce.org. Important information on how to prevent
Noise-Induced Hearing Loss (NIHL) and a comprehensive list of which noises can
cause damage can be found on the Deafness Research Foundation’s website,
www.drf.org.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection gainst harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, ay cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>