RAB Lighting PORTO 30 Watt LED Garage Light User Manual
- June 12, 2024
- RAB Lighting
Table of Contents
RAB Lighting PORTO 30 Watt LED Garage Light
Product Information
The PORTO LED garage light is designed to provide high-output lighting for garages and other indoor spaces. It is available in multiple wattage options, including 30W, 42W, 55W, 70W, 80W, and 105W models. The light is IP66 rated, making it protected against dust and water ingress. The 30W, 42W, 55W, and 105W models are DLC listed, while the 70W and 80W models are DLC Premium listed. The light has a long lifespan of 100,000 hours based on IES LM-80 results and TM-21 calculations. It is suitable for wet locations and comes with surge protection of 4kV.
Product Usage Instructions
- Determine the appropriate wattage of the PORTO LED garage light based on the ceiling height. Use the 30W, 42W, or 55W models for standard 8-10′ ceilings. Use the higher wattage models (70W, 80W, or 105W) for higher ceilings (over ramps).
- Choose the desired color temperature (5000K, 4000K, or 3000K) based on your preference and lighting requirements.
- Install the PORTO LED garage light at the desired location. Ensure that it is mounted securely and properly aligned.
- Connect the light to a compatible power source. The driver supports a wide voltage range (100 – 277V and 480V) and operates at a frequency of 50/60 Hz.
- Verify that the surge protection is in place (4kV) to safeguard the light against power surges.
- Adjust the light’s output by considering the mounting height multiplier provided in the user manual. Use the grid scales to determine the footcandle values at different distances from the light.
- Enjoy the high-output and energy-efficient lighting provided by the PORTO LED garage light.
- Integrated photo/motion sensor control available
- Replace up to 400W MH
- Ultra-high efficiency up to 118 lm/W
- Available in 2 sizes and 5 wattages: 30, 42, 55, 70, 80 and 105W
- Pendant and surface mount
- Low glare, vandal-resistant polycarbonate lens
- 20% uplight eliminates “cave effect”
Photometrics
14” PORTO
18” PORTO
SPECIFICATION
-
UL Listing: Suitable for wet locations
-
LEDs: Long-life, high-efficiency surface mount LEDs
-
Lifespan: 100,000-hour LED lifespan based on IES LM-80 results and TM-21 calculations
-
IP Rating: IP66, protected against dust and water ingress
Drivers:- 30W: Constant current, Class 2, 100 – 277V and 480V, 50/60 Hz, 120V: 0.25A, 208V: 0.13A, 240V: 0.12A, 277V: 0.11A, 480V: 0.12A, surge protection 4kV, THD ≤20%, pF 99%
- 42W: Constant current, Class 2, 100 – 277V and 480V, 50/60 Hz, 120V: 0.36A, 208V: 0.19A, 240V: 0.18A, 277V: 0.17A, 480V: 0.13A, surge protection 4kV, THD ≤20%, pF 99%
- 55W: Constant current, Class 2, 100 – 277V and 480V, 50/60 Hz, 120V: 0.50A, 208V: 0.33A, 240V: 0.32A, 277V: 0.31A, 480V: 0.13A, surge protection 4kV, THD ≤20%, pF 99%
- 70W: Constant current, Class 2, 100 – 277V and 480V, 50/60 Hz, 120V: 0.59A, 208V: 0.37A, 240V: 0.32A, 277V: 0.27A, 480V: 0.15A, surge protection 4kV, THD ≤20%, pF 90%
- 80W: Constant current, Class 2, 100 – 277V and 480V, 50/60 Hz, 120V: 0.68A, 208V: 0.42A, 240V: 0.36A, 277V: 0.31A, 480V: 0.23A, surge protection 4kV, THD ≤20%, pF 90%
- 105W: Constant current, Class 2, 100 – 277V and 480V, 50/60 Hz, 120V: 0.87A, 208V: 0.52A, 240V: 0.45A, 277V: 0.38A, 480V: 0.23A, surge protection 4kV, THD ≤20%, pF 90%
-
Ambient Temperature: Suitable for use in 40°C ambient temperatures.
-
Cold Weather Starting: The minimum starting temperature is -40°C.
-
Thermal Management: Superior thermal management with external
-
Housing: Die-cast aluminum and sheetmetal housing
-
Mounting: Die-cast aluminum backbox with (4) 1/2” conduit openings with plugs. Hinged tether for easy installation and wiring. Also accomo-dates 1/2” or 3/4” NPS pendants (provided by others).
-
Lens: High-transmission and vandal-resistant polycarbonate frosted lens
-
Reflector: Specular polycarbonate
-
Gaskets: High-temperature silicone gaskets
-
Color Stability: LED color temperature is warrantied to shift no more than 200K in CCT over a 5 year period.
-
Color Uniformity: RAB’s range of CCT (Correlated Color Temperature) for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2015.
-
Finish: Our environmentally friendly polyester powder coatings are formulated for high-durability and long-lasting color, and contain no VOC or toxic heavy metals.
-
Green Technology: Mercury and UV free, and RoHS compliant. Polyester metals.
-
IESNA LM-79 & LM-80 Testing: RAB LED luminaires have been tested in accordance with IESNA LM-79 and LM-80, and have received the Depart-ment of Energy “Lighting Facts” label.
-
California Title 24: PORTO models with integrated multi-level motion sensor comply with 2013 California Title 24 building and electrical codes covered parking garages.
-
14” PORTO 30W**
Color Temperature| 5000K| 4000K| 3000K
---|---|---|---
Input Watts| 29| 29| 29
Output Lumens| 3,455| 3,151| 3,136
Lumens Per Watt| 118| 108| 107
Color Accuracy (CRI)**| 74| 73| 72 -
14” PORTO 42W**
Color Temperature| 5000K| 4000K| 3000K
---|---|---|---
Input Watts| 43| 43| 43
Output Lumens| 4,833| 4,382| 4,316
Lumens Per Watt| 112| 103| 101
Color Accuracy (CRI)**| 74| 73| 72 -
14” PORTO 55W**
Color Temperature| 5000K| 4000K| 3000K
---|---|---|---
Input Watts| 59| 57| 58
Output Lumens| 6,085| 5,303| 5,234
Lumens Per Watt| 103| 93| 91
Color Accuracy (CRI)**| 75| 73| 72 -
18” PORTO 70W**
Color Temperature| 5000K| 4000K| 3000K
---|---|---|---
Input Watts| 71| 70| 71
Output Lumens| 7,835| 7,715| 7,642
Lumens Per Watt| 111| 110| 108
Color Accuracy (CRI)**| 74| 73| 71 -
18” PORTO 80W**
Color Temperature| 5000K| 4000K| 3000K
---|---|---|---
Input Watts| 82| 80| 81
Output Lumens| 8,754| 8,479| 8,384
Lumens Per Watt| 107| 106| 104
Color Accuracy (CRI)**| 74| 73| 71 -
18” PORTO 105W**
Color Temperature| 5000K| ****4000K| 3000K
---|---|---|---
Input Watts| 104| 104| 103
Output Lumens| 10,208| 10,162| 9,950
Lumens Per Watt| 98| 98| 96
Color Accuracy (CRI)**| 74| 73| 71
Multi-level sensor specifications
- UUL: Suitable for wet locations as factory installed
- IP Rating: IP66, protected against dust and water ingress
- Power consumption: 1W
- 0-10V sinking current: 50mA
- Adjustable high and low modes: High: 0-10V; Low: off, 0-9.8V
- Adjustable time delay: Amount of time in high mode with no motion before switching to low mode: 1 – 30 min. to turn on: None, 1 – 60 min., 1 – 5 hrs.
- Adjustable cut off delay: Time in which the fixture will remain on low mode with no motion before turning off and waiting for new motion to turn on: None, 1 – 60 min., 1 – 5 hrs.
- Adjustable sensitivity: None, low, medium, maximum
- Adjustable setpoint: None, 1 to 250 fc, auto
- Adjustable ramp up and fade down times: 1 – 60 sec.
- Operating temperature: -40°F to 167°F (-40°C to 75°C)
- Operating Humidity: 20% to 90% noncondensing
- Relay life rating: 200,000 cycles (120/277VAC), 50,000 cycles (230VAC)
Photo/motion sensor detection coverage
SENSOR FOR 14” PORTO
SENSOR FOR 18” PORTO
Dimensions & weight
Ordering information
HOW TO USE
- Hinged tether frees hands for easy wiring & quick installation.
- One model accomodates 1/2” or 3/4” NPS pendant, or surface mount (pendant by others).
- Delivers 20% uplight, eliminating the ‘cave effect’ that results when ceilings remain darkened.
Integrated photo/motion sensor control
- High/low modes: 10V / 1V
- Time delay dims light 5 minutes after detecting motion
- Cutoff turns fixture off after 1 hour of vacancy
- Detection pattern:
- For 14″ PORTO – 360° and 48′ diameter at 8′ mounting height
- For 18″ PORTO – 360° and 40′ diameter at 20′ mounting height
Adjust settings using handheld wireless configuration tool (Order using catalog #WSREM)
- High/low modes fully adjustable from 0 to 10V
- Time delay can be set to dim lights 30 seconds to 30 minutes after motion is no longer detected
- Optional cutoff delay turns fixture off after a preset period of vacancy
- Configure control settings to react to ambient light levels
- Ramp up and fade down times can be customized
18” PORTOs with higher wattages can be used where higher ceilings exist (over ramps) while 14” PORTOs are suitable for standard 8-10’ ceilings.
30, 42, 55 and 105W models are DLC listed. 70 and 80W models are DLC Premium listed
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>