MoesGo MS-105 Smart Dimmer Module Instruction Manual

MoesGo MS-105 Smart Dimmer Module

Product Information

Instruction Manual Smart Dimmer Module (MS-105)

The Smart Dimmer Module is a device that allows you to control the brightness of your lights remotely using a mobile app or voice commands. It supports global international operation and can be integrated with Google Home and Amazon Alexa for voice control. The module can also be controlled locally within your home using the mobile app. It is designed for easy installation and is compatible with a wide range of household electrical appliances.

Technical Specifications

• Product Type: Smart Dimmer Module
• Voltage: 90-250V AC
• Max Power: Dependent on the connected load
• WiFi Frequency: 2.4 GHz
• Operation Temp.: Dependent on the operating environment
• Case Temp.: Dependent on the operating environment
• Operation Range: Dependent on the WiFi signal strength
• Dims (WxDxH): 18mm x 52mm x 47mm
• IP Rating: Not specified

Product Usage Instructions

Installation

Warning: Installation must be carried out by a qualified electrician by local regulations. Ensure the device is kept out of the reach of children and away from water, dampness, or hot environments. Install the device away from strong signal sources to avoid signal interruption. Do not attempt to disassemble, repair, or modify the device.

1. Turn off the power supply before carrying out any electrical installation work.
2. Connect the wires according to the provided wiring diagram.
3. Insert the module into the junction box.
4. Connect the power supply and follow the switch module configuration instructions.
5. Notes: Put your smartphone close to the switch module when configuring and ensure you have a minimum of 50% Wi-Fi signal.

APP Operation

Scan the QR code to get the manual on Russian language, installation video and description of functions

Global international operation Whenever & Wherever You are, All-in-one Mobile App

Inhouse local operation

INSTRUCTIONS

Step 1

• Turn off the circuit breaker and use the electrical tester to test the power.
• Ensure the circuit breaker is off before wiring.

Attention

• Please disconnect the power supply before installing or removing the device for avoiding irreversible damage on the device from the electric current or some unpredictable problems such as lamp flashing.

Step 2

• Remove the old switch

Step 3

• Remove the switch and pull it away from the wall.
• dentify Line/Load Wire(Note:The color of your wire may be different from the color shown on the manual.)

Warning: Verify power is off

• We recommend you remove the faceplate from the old switch and use an electrical tester to test all wires connected to the switch to ensure there is no voltage in the circuit.
• You may need to turn off more than one circuit breaker.

INSTALLATION

Warnings

1. Installation must be carried out by a qualified electrician in accordance with local regulations.
2. Keep the device out of the reach of children.
3. Keep the device away from water, damp or hot environment.
4. Install the device away from strong signal sources such as microwave oven that may cause signal interruption resulted in abnormal operation of the device.
5. Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.
6. Do NOT attempt to disassemble, repair or modify the device.

TECHNICAL SPECIFICATIONS

• Product Type: Smart Dimmer Module
• Voltage: 90-250V AC 50/60Hz
• Max Power: 75W 110V / 150W 220V
• WiFi Frequency: Wi-Fi 2.4GHz IEEE 802.11 b/g/n
• Operation Temp.: -10°C – +40°C
• Case lemp.: Tc: +80°C (Max.)
• Operation Range: ≤200 m
• Dims (WxDXH): 52×47×18 mm
• IP Rating: IP20

WIRING DIAGRAM

1. With one switch
2. Without switch
3. With 2 Way switches

Wiring Instructions and Diagrams

1. Turn off the power supply before carrying out any electrical installation work.
2. Connect wires according to the wiring diagram.
3. Insert the module into the junction box.
4. Connect the power supply and follow switch module configuration instructions.

Notes: Put your smartphone close to the switch module when you’re configuring, and make sure you have min. 50% Wi-Fi signal.

FAQ

Q1: What should I do if I can’t configure the switch module?

• Please check whether device is powered on.
• Make sure your mobile and switch module are under the same 2.4 GHz WiFi network.
• Whether it’s in good internet conditions.
• Make sure the password entered in App is correct.
• Make sure the wiring is correct.

Q2: What device can be connected to this WiFi switch module?

• Most of your household electrical appliances can be, such as lamps, laundry machine, coffe maker, etc.

Q3: What happens if the WiFi goes off?

• You can still control the device connected the switch module with your traditional switch and once WiFi is active again the device connected to module will connect automatically to your WiFi network.

Q4: What should I do if I change the WiFi network or change the password?

• You have to re-connect our WiFi switch module to the new WiFi network according to the App User Manual.

Q5: How do I reset the device?

• Power on/off device 10 times until the beeper on the module sounds continuously.

MANUAL OVERRIDE

• The switch module terminal reserves the access of manual override function for the end-user to switch on/off.
• Switch on/off for permanent on/off function.

Notes

1. Both the adjustment on App and switch can be reset, the last adjustment remains in memory.
2. The App control is synchronized with the manual switch.

APP USER MANUAL

APP INSTRUCTIONS

1. Scan the QR code to download Smart Life App, or you can also search keyword “Smart Life” at App Store or Googleplay to download App.

2. Log in or register your account with your mobile number or e-mail address. Type in the verification code sent to your mobile or mail box, then set your login password. Click “Create Family” to enter into the App.

   • Note: This smart switch module can only be used with reset switch.

3. Pair and clear up the WiFi code with phone Bluetooth on and WiFi connected meantime.(New Updated)

4. Make sure your phone is connected to Wi-Fi and phone Bluetooth on.

5. Open Smart Life/Tuya App and Click“+”,then the prompt page will automatically show on the screen.Click “Go to add”.

6. Select the device you want to add and click “+”

7. Add the device successfully, you can edit the name of the device to enter the device page by click “Done”

8. Connect to Amazon Alexa or Google Assistant for voice control, or share the devices with your families or friends.

9. Enjoy your smart life of home automation for lighting control by using our All-in-one mobile App wherever you are in the world or simply by voice control when you are sitting at home comfortably.

SERVICE AND WARRANTY

SERVICE

1. During the free warranty period, if the product breaks down during normal use, we will offer free maintenance for the product.
2. Natural disasters/man-made equipment failures, disassembly and repair without the permission of our company, no warranty card, products beyond the free warranty period, etc., are not within the scope of free warranty
3. Any commitment (oral or written) made by the third party (including the dealer/service provider) to the user beyond the warranty scope shall be executed by the third party
4. Please keep this warranty card to ensure your rights
5. Our company may update or change the products without notice. Please refer to the official website for the updates.

RECYCLING INFORMATION

All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be disposed of separately from unsorted municipal waste. To protect your health and theenvironment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.

WARRANTY CARD

Product Information

• Product Name ____
• Product Type _____
• Purchase Date ____
• Warranty Period __
• Dealer Information ____
• Customer’s Name _____
• Customer Phone __
• Customer Address ____

Maintenance Records

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>