RAB LIGHTING P-100903 Aled Roadway Arm Lighting Installation Guide
- June 1, 2024
- RAB Lighting
Table of Contents
RAB LIGHTING P-100903 Aled Roadway Arm Lighting
Specifications
- Brand: RAB Lighting
- Type: LED Roadway Fixture
- Compatibility: Fits 1, 1.25, 1.5, and 2 Pole Tenons
- Mounting: Arm Mount
- Warranty: Subject to terms and conditions found at rablighting.com/warranty
Roadway Arm Mounting
-
Ensure the ROADWAY ARM fits the appropriate Pole Tenon size.
-
Open the Arm Door and insert the Pole Mounting Clamp into the
Roadway Arm, then slide the Arm onto the Pole Tenon while guiding wires into the Splice Box. -
Tighten the Pole Mounting Clamp with provided Bolts to secure the Roadway Arm on the pole.
Assemble the Fixture to the Arm
- Align the Roadway Arm with the Fixture and feed wires from the Fixture into the Splice Box. Slide the Fixture onto the Roadway Arm, ensuring no wiring is pinched.
- Attach the Lock Washer to the Mounting Bolt and place it into the Mounting Hole. Secure by tightening the Mounting Bolt.
- Make necessary wire connections inside the Splice Box, knot wires for strain relief, and close the Arm Door.
FAQ
How do I contact RAB Lighting for support?
You can visit our website at rablighting.com for product
information, call our Tech Help Line at
888-722-1000, or email us at
sales@rablighting.com for prompt assistance.
INSTRUCTIONS
ALED® (S &M) ROADWAY ARM INSTALLATION
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
RAB fixtures must be wired in accordance with the National Electrical Code and
all applicable local codes. Proper grounding is required for safety. THIS
PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND
THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining fixture.
No user serviceable parts inside. CAUTION: For proper weatherproof function
all gaskets must be seated properly and all screws inserted and tightened
firmly.
ROADWAY ARM MOUNTING
- The ROADWAY ARM fits a 1”, 1.25”, 1.5” and 2” Pole Tenon.
- Unlatch the Arm Door and place the appropriate Pole Mounting Clamp in the Roadway Arm as shown in Fig. 1. The tenon diameter is marked on the Pole Mounting Clamp(s). Slide the Roadway Arm on the Pole Tenon while guiding the wires into the Splice Box (Fig. 2).
- Secure the Roadway Arm on the pole by tightening the Pole Mounting Clamp with Bolts (provided).
ASSEMBLE THE FIXTURE TO THE ARM
- Line up the Roadway Arm with the Fixture (Fig. 3) and feed wires from the Fixture into the Splice Box (Fig. 3 and 4). Slide the Fixture onto the Roadway Arm while ensuring wiring is not pinched between Roadway Arm and the Fixture (Fig. 3).
- Assemble the Lock Washer to the Mounting Bolt and place into Mounting Hole. Secure by tightening the Mounting Bolt (Fig. 3).
- Make the necessary wire connections inside the Splice Box and knot the wires for strain relief. Push the Arm Door closed to latch.
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.
Easy Answers
- Tech Help Line
- Call our experts: 888 722-1000 e-mail
- Answered promptly – sales@rablighting.com
- Free Lighting Layouts
- Answered o © 2024 RAB LIGHTING Inc. nline or by request
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>