SALTO Neo Mortise Cylinder for Deadlatches Instruction Manual
- June 12, 2024
- SALTO
Table of Contents
SALTO Neo Mortise Cylinder for Deadlatches
Product Information
The SALTO Neo Mortise cylinder is designed for Deadlatches. It is a high- quality product manufactured by SALTO Systems S.L. The cylinder is suitable for both indoor and outdoor use and comes with IP66 protection. It is recommended to use batteries with the model number SP01926-5. The product is compatible with Cloverleaf or similar cams.
Please note that the product does not include batteries, and it is important to use LR1 new batteries for proper functioning. The product has a maximum torque of 3.5 Nm and should be installed following the instructions provided.
Product Usage Instructions
- Before installation, make sure to disable the cam position unlocking system.
- Retract the deadbolt by turning the knob until it is in a vertical position.
- For deadlatch type lock installations, refer to the previous instructions from 225821.
- To change the batteries, follow these steps:
- Remove any metallic objects in front of the reader within a distance of less than 5cm.
- Replace the batteries with LR1 new batteries.
- Make sure the batteries are inserted correctly.
- Close the battery compartment securely.
Please ensure to read and follow all installation and usage recommendations provided by SALTO Systems S.L. For more detailed information, please refer to the user manual available at https://www.saltosystems.com/en/quick-links /manuals-and-guides/.
Tools
For a correct installation, it is neccessary to follow this instruction.
Disable cam position unlocking system
Caution
Installation
Cylinder uninstallation
Battery change
Use
Do not place any metallic object in front of reader closer than 5cm.
All other references to other registered trademarks belong to their respective owners.
All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.
- 2019 SALTO Systems S.L.
- 225782-ED.- 24/06/2020
The knob is uniquely paired to the cylinder, and will not work if you switch in a different SALTO cylinder.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>