LEXON LR150 Flip Travel Instruction Manual
- June 12, 2024
- LEXON
Table of Contents
LR150 FLIP+ 
LR150 Flip Travel
- Dimensions: 104 x 30 x65.5 mm
- Button: SET, HR+, HR-, MIN+, MIN-, SNOOZE/LIGHT, LIGHT
- Function: time, alarm, snooze, 12/24hour, LED backlight
- Power output: 0.07W Voltage: 3V
Included items:
- LR150 FLIP ALARM CLOCK
- BATTERY: 1.5V AAA X 2PCS
- INSTRUCTION MANUAL
GET STARTED
FLIP Alarm Clock is set to automatically adjust local time thanks to RCC
technology (Radio Controlled Clock).
It can take up to 7 minutes to FLIP to receive the signal and adjust time
after installing the batteries inside the product.
FLIP will regularly synch with RCC signal in order to make sure the time is
always accurate.
The RCC Signal icon will flash until the connection is established and time
properly set on your device.
You can manually adjust time on your FLIP device by following the below
instructions:
-
Long press the SET button on the back of the device in order to set the time difference of your location vs. the RCC time zone.
(RCC Time Zone= CET Central European Time zone)
Example: for UK, set to -1. -
Press the SET button again to access to Time Format setting
Press + or — to select the appropriate format -
Press the SET button one more time to setup the local time
Use both hours (HR) and minutes (MIN) buttons on the back to set the proper time
Press SET to validate
You can use FLIP Alarm Clock to wake you up in the morning:
First set the desired wake-up time by positioning your device with the ON sign
facing up (alarm time will appear on the right of the LCD screen)
Use HR and MIN buttons on the back of your device to set your alarm time.
Make sure the ON sign keep facing up to enable the alarm feature.
To turn it off, simply flip your device opposite side with OFF sign facing up.
Alarm will ring following the below pattern:
- First 10 seconds, one BIP per second
- From 10th to 20th second, double BIP
- From 20th to 30th second, triple BIP
- From 30th second until 2 minutes, continuous BIP
You can SNOOZE the alarm by simply touching the ON sign on the top of your
FLIP Clock. Alarm will ring again after 5 minutes.
You can STOP the alarm by pressing any button on the back of your device.
The preset Alarm will ring again on the following day.
To disable the alarm, simply flip your device opposite side with OFF sign
facing up.
During the night you can light-up your screen by simply touching the top
surface of your device whether it is ON or OFF. The backlight function will
stay ON for 4 seconds.
RCC Signal ON & OFF
You might want to disable RCC Signal if you’re leaving in a country not
supporting this technology.
The ON/OFF switch for RCC Signal is located in the battery compartment.
When ON is selected, Flip will search for local signal and adjust time
automatically.
When OFF is selected, you need to manually adjust time as perinstructions
described above.
By default RCC Signal is set to ON.
EUROPEAN UNION CE DIRECTIVE
LEXON hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the RE Directives 2014/53/EU,
EMC Directives 2014/30/EU.
The original declaration of conformity may be found at: https://www.lexon-
design.com/assets/certifications-ce-flipplus.pdf
RE Directives 2014/53/EU, EMC Directives 2014/30/EU.
DISPOSAL AND RECYCLING INFORMATION
After the implementation of the European Directive 2012/19/EU in the national
legal system, the following applies : electrical and electronic devices may
not be dis-posed of with domestic waste.
Consumers are obliged by law to return electrical and electronic device at the
end of their service lives to the public collecting points set up for this
purpose or point of sale. Details to this are defined by the national law of
the respective country. This symbol on the product, the instruction manual or
the package indicates that a product is subject to these regulations. By
recycling, reusing the materials or other forms of utilizing old devices, you
are making an important contribution to protecting our environment.
USA-FCC STATEMENT
**This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Notice:**
Any changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
CANADIAN COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-0003.
91, Av. Jean-Baptiste Cl~ment – 92100 Boulogne – FRANCE
All brands or product names are or may be trademarks or their respective
owners
Pictures and specifications are not contractual Assembled in China
lexon-design.com